Bug apache2 (in ispc3) after update

Discussion in 'General' started by demetrope, Sep 13, 2013.

  1. demetrope

    demetrope New Member

    Hello,
    To start sorry for aglais Pastres minutes which is good,
    I host a machine with more virtuahost via ispc3.
    Yesterday after a series of:
    apt-get update, uprade, dist-uprgade
    my server appache not answer, if I go to my admin page iscp3 I get:

    Code:
    Firefox can not establish a connection to the server at ks0000000.kimsufi.com 8080.
       
       The site could be temporarily unavailable or too busy. Try more
         later;
       If you are unable to load any pages, check the connection
         to network your computer;
       If your computer or network is protected by a firewall or proxy,
         make sure that Firefox is permitted to access the Web.
    If I go to a site hosted in virtualhost:

    Code:
    Not Found
    
    The requested URL /web/ts3wi/index.php was not found on this server.
    Apache/2.2.22 (Debian) Server at blabla.fr Port 80
    I have searched all night and part of the morning but I dry.

    When I do a restart apache2 I get side console:

    Code:
    [email protected]:~# /etc/init.d/apache2 restart
    [....] Restarting web server: apache2[Thu Sep 12 10:53:16 2013] [warn] NameVirtualHost 00.000.000.000:80 has no VirtualHosts
    [Thu Sep 12 10:53:16 2013] [warn] NameVirtualHost 00.000.000.000:443 has no VirtualHosts
    [Thu Sep 12 10:53:16 2013] [warn] NameVirtualHost *:443 has no VirtualHosts
    [Thu Sep 12 10:53:16 2013] [warn] NameVirtualHost *:80 has no VirtualHosts
     ... waiting [Thu Sep 12 10:53:18 2013] [warn] NameVirtualHost 00.000.000.000:80 has no VirtualHosts
    [Thu Sep 12 10:53:18 2013] [warn] NameVirtualHost 00.000.000.000:443 has no VirtualHosts
    [Thu Sep 12 10:53:18 2013] [warn] NameVirtualHost *:443 has no VirtualHosts
    [Thu Sep 12 10:53:18 2013] [warn] NameVirtualHost *:80 has no VirtualHosts
    . ok
    I replaced my IP 00.000.000.000 by the message above example.
    So then:

    errors.logs:

    Code:
    [Fri Sep 13 06:53:23 2013] [error] [client 128.72.27.226] client denied by server configuration: /var/www/conf/, referer: http://blabla.fr/
    [Fri Sep 13 06:53:23 2013] [error] [client 128.72.27.226] client denied by server configuration: /var/www/clients/, referer: http://blabla.fr/
    [Fri Sep 13 06:55:01 2013] [error] [client 127.0.0.1] client denied by server configuration: /var/www/conf/
    [Fri Sep 13 06:55:01 2013] [error] [client 127.0.0.1] client denied by server configuration: /var/www/clients/
    Then in / etc/apache2/sites-available:
    default:

    Code:
    <VirtualHost *:80>
    	ServerAdmin [email protected]
    
    	DocumentRoot /var/www
    	<Directory />
    		Options FollowSymLinks
    		AllowOverride None
    	</Directory>
    	<Directory /var/www/>
    		Options Indexes FollowSymLinks MultiViews
    		AllowOverride None
    		Order allow,deny
    		allow from all
    	</Directory>
    
    	ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
    	<Directory "/usr/lib/cgi-bin">
    		AllowOverride None
    		Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
    		Order allow,deny
    		Allow from all
    	</Directory>
    
    	ErrorLog ${APACHE_LOG_DIR}/error.log
    
    	# Possible values include: debug, info, notice, warn, error, crit,
    	# alert, emerg.
    	LogLevel warn
    
    	CustomLog ${APACHE_LOG_DIR}/access.log combined
    </VirtualHost>
    defaut-ssl:

    Code:
    <IfModule mod_ssl.c>
    <VirtualHost _default_:443>
    	ServerAdmin [email protected]
    
    	DocumentRoot /var/www
    	<Directory />
    		Options FollowSymLinks
    		AllowOverride None
    	</Directory>
    	<Directory /var/www/>
    		Options Indexes FollowSymLinks MultiViews
    		AllowOverride None
    		Order allow,deny
    		allow from all
    	</Directory>
    
    	ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
    	<Directory "/usr/lib/cgi-bin">
    		AllowOverride None
    		Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
    		Order allow,deny
    		Allow from all
    	</Directory>
    
    	ErrorLog ${APACHE_LOG_DIR}/error.log
    
    	# Possible values include: debug, info, notice, warn, error, crit,
    	# alert, emerg.
    	LogLevel warn
    
    	CustomLog ${APACHE_LOG_DIR}/ssl_access.log combined
    
    	#   SSL Engine Switch:
    	#   Enable/Disable SSL for this virtual host.
    	SSLEngine on
    
    	#   A self-signed (snakeoil) certificate can be created by installing
    	#   the ssl-cert package. See
    	#   /usr/share/doc/apache2.2-common/README.Debian.gz for more info.
    	#   If both key and certificate are stored in the same file, only the
    	#   SSLCertificateFile directive is needed.
    	SSLCertificateFile    /etc/ssl/certs/ssl-cert-snakeoil.pem
    	SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key
    
    	#   Server Certificate Chain:
    	#   Point SSLCertificateChainFile at a file containing the
    	#   concatenation of PEM encoded CA certificates which form the
    	#   certificate chain for the server certificate. Alternatively
    	#   the referenced file can be the same as SSLCertificateFile
    	#   when the CA certificates are directly appended to the server
    	#   certificate for convinience.
    	#SSLCertificateChainFile /etc/apache2/ssl.crt/server-ca.crt
    
    	#   Certificate Authority (CA):
    	#   Set the CA certificate verification path where to find CA
    	#   certificates for client authentication or alternatively one
    	#   huge file containing all of them (file must be PEM encoded)
    	#   Note: Inside SSLCACertificatePath you need hash symlinks
    	#         to point to the certificate files. Use the provided
    	#         Makefile to update the hash symlinks after changes.
    	#SSLCACertificatePath /etc/ssl/certs/
    	#SSLCACertificateFile /etc/apache2/ssl.crt/ca-bundle.crt
    
    	#   Certificate Revocation Lists (CRL):
    	#   Set the CA revocation path where to find CA CRLs for client
    	#   authentication or alternatively one huge file containing all
    	#   of them (file must be PEM encoded)
    	#   Note: Inside SSLCARevocationPath you need hash symlinks
    	#         to point to the certificate files. Use the provided
    	#         Makefile to update the hash symlinks after changes.
    	#SSLCARevocationPath /etc/apache2/ssl.crl/
    	#SSLCARevocationFile /etc/apache2/ssl.crl/ca-bundle.crl
    
    	#   Client Authentication (Type):
    	#   Client certificate verification type and depth.  Types are
    	#   none, optional, require and optional_no_ca.  Depth is a
    	#   number which specifies how deeply to verify the certificate
    	#   issuer chain before deciding the certificate is not valid.
    	#SSLVerifyClient require
    	#SSLVerifyDepth  10
    
    	#   Access Control:
    	#   With SSLRequire you can do per-directory access control based
    	#   on arbitrary complex boolean expressions containing server
    	#   variable checks and other lookup directives.  The syntax is a
    	#   mixture between C and Perl.  See the mod_ssl documentation
    	#   for more details.
    	#<Location />
    	#SSLRequire (    %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
    	#            and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
    	#            and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
    	#            and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
    	#            and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20       ) \
    	#           or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
    	#</Location>
    
    	#   SSL Engine Options:
    	#   Set various options for the SSL engine.
    	#   o FakeBasicAuth:
    	#     Translate the client X.509 into a Basic Authorisation.  This means that
    	#     the standard Auth/DBMAuth methods can be used for access control.  The
    	#     user name is the `one line' version of the client's X.509 certificate.
    	#     Note that no password is obtained from the user. Every entry in the user
    	#     file needs this password: `xxj31ZMTZzkVA'.
    	#   o ExportCertData:
    	#     This exports two additional environment variables: SSL_CLIENT_CERT and
    	#     SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
    	#     server (always existing) and the client (only existing when client
    	#     authentication is used). This can be used to import the certificates
    	#     into CGI scripts.
    	#   o StdEnvVars:
    	#     This exports the standard SSL/TLS related `SSL_*' environment variables.
    	#     Per default this exportation is switched off for performance reasons,
    	#     because the extraction step is an expensive operation and is usually
    	#     useless for serving static content. So one usually enables the
    	#     exportation for CGI and SSI requests only.
    	#   o StrictRequire:
    	#     This denies access when "SSLRequireSSL" or "SSLRequire" applied even
    	#     under a "Satisfy any" situation, i.e. when it applies access is denied
    	#     and no other module can change it.
    	#   o OptRenegotiate:
    	#     This enables optimized SSL connection renegotiation handling when SSL
    	#     directives are used in per-directory context.
    	#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
    	<FilesMatch "\.(cgi|shtml|phtml|php)$">
    		SSLOptions +StdEnvVars
    	</FilesMatch>
    	<Directory /usr/lib/cgi-bin>
    		SSLOptions +StdEnvVars
    	</Directory>
    
    	#   SSL Protocol Adjustments:
    	#   The safe and default but still SSL/TLS standard compliant shutdown
    	#   approach is that mod_ssl sends the close notify alert but doesn't wait for
    	#   the close notify alert from client. When you need a different shutdown
    	#   approach you can use one of the following variables:
    	#   o ssl-unclean-shutdown:
    	#     This forces an unclean shutdown when the connection is closed, i.e. no
    	#     SSL close notify alert is send or allowed to received.  This violates
    	#     the SSL/TLS standard but is needed for some brain-dead browsers. Use
    	#     this when you receive I/O errors because of the standard approach where
    	#     mod_ssl sends the close notify alert.
    	#   o ssl-accurate-shutdown:
    	#     This forces an accurate shutdown when the connection is closed, i.e. a
    	#     SSL close notify alert is send and mod_ssl waits for the close notify
    	#     alert of the client. This is 100% SSL/TLS standard compliant, but in
    	#     practice often causes hanging connections with brain-dead browsers. Use
    	#     this only for browsers where you know that their SSL implementation
    	#     works correctly.
    	#   Notice: Most problems of broken clients are also related to the HTTP
    	#   keep-alive facility, so you usually additionally want to disable
    	#   keep-alive for those clients, too. Use variable "nokeepalive" for this.
    	#   Similarly, one has to force some clients to use HTTP/1.0 to workaround
    	#   their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
    	#   "force-response-1.0" for this.
    	BrowserMatch "MSIE [2-6]" \
    		nokeepalive ssl-unclean-shutdown \
    		downgrade-1.0 force-response-1.0
    	# MSIE 7 and newer should be able to use keepalive
    	BrowserMatch "MSIE [17-9]" ssl-unclean-shutdown
    
    </VirtualHost>
    </IfModule>
    ispconfig.vhost:

    Code:
    ######################################################
    # This virtual host contains the configuration
    # for the ISPConfig controlpanel
    ######################################################
    
     Listen 8080
    NameVirtualHost *:8080
    
    <VirtualHost _default_:8080>
      ServerAdmin [email protected]
      
      <FilesMatch "\.ph(p3?|tml)$">
        SetHandler None
      </FilesMatch>
      
      <IfModule mod_fcgid.c>
        DocumentRoot /var/www/ispconfig/
        SuexecUserGroup ispconfig ispconfig
        <Directory /var/www/ispconfig/>
          Options -Indexes FollowSymLinks MultiViews +ExecCGI
          AllowOverride AuthConfig Indexes Limit Options FileInfo
          AddHandler fcgid-script .php
          FCGIWrapper /var/www/php-fcgi-scripts/ispconfig/.php-fcgi-starter .php
          Order allow,deny
          Allow from all
        </Directory>
        IPCCommTimeout  7200
    	MaxRequestLen 15728640
      </IfModule>
      
      <IfModule mpm_itk_module>
        DocumentRoot /usr/local/ispconfig/interface/web/
    	AssignUserId ispconfig ispconfig
        AddType application/x-httpd-php .php
        <Directory /usr/local/ispconfig/interface/web>
          # php_admin_value open_basedir "/usr/local/ispconfig/interface:/usr/share:/tmp"
          Options FollowSymLinks
          AllowOverride None
          Order allow,deny
          Allow from all
    	  php_value magic_quotes_gpc        0
        </Directory>
      </IfModule>
      
      # ErrorLog /var/log/apache2/error.log
      # CustomLog /var/log/apache2/access.log combined
      ServerSignature Off
      
      <IfModule mod_security2.c>
        SecRuleEngine Off
      </IfModule>
    
      # SSL Configuration
      SSLEngine On
      SSLCertificateFile /usr/local/ispconfig/interface/ssl/ispserver.crt
      SSLCertificateKeyFile /usr/local/ispconfig/interface/ssl/ispserver.key
      #SSLCACertificateFile /usr/local/ispconfig/interface/ssl/ispserver.bundle
    
    </VirtualHost>
    
    <Directory /var/www/php-cgi-scripts>
        AllowOverride None
        Order Deny,Allow
        Deny from all
    </Directory>
    
    <Directory /var/www/php-fcgi-scripts>
        AllowOverride None
        Order Deny,Allow
        Deny from all
    </Directory>
    Thank you in advance for your help
     
  2. till

    till Super Moderator Staff Member ISPConfig Developer

    Thats ok and not a bug. apache tells you that you cann add additional vhosts under these addresses.
     
  3. demetrope

    demetrope New Member

    Ok thank you for that answer, but why I can not get to it in my administrator page ispc3, are in one of my web sites then?
     
  4. till

    till Super Moderator Staff Member ISPConfig Developer

    Please check that the apache module mod_fcgid is installed and activated.
     
  5. demetrope

    demetrope New Member

    hi,
    I do not know how to test if my module is installed against if I go to:

    /etc/apache2/mods-available

    I have a file that is named fcgid.conf and contains:

    Code:
    <IfModule mod_fcgid.c>
      AddHandler	fcgid-script .fcgi
      FcgidConnectTimeout 20
    </IfModule>
    MaxRequestLen 15728640
    Thank you for your help, sorry to be so bad about that part of it, the part xhtml, php, java is easier for me.
     
  6. till

    till Super Moderator Staff Member ISPConfig Developer

    You can check it like this, edit the ispconfig vhost file and put a # in front of the line:

    <IfModule mod_fcgid.c>

    and before the closing

    </IfModule>

    (which is 13 lines after the IfModule line).

    Then restart apache to see if you get a error message regarding fcgid.
     
  7. demetrope

    demetrope New Member

    hello,
    then test after I receive this message:

    HTML:
    [email protected]:~# /etc/init.d/apache2 restart
    [....] Restarting web server: apache2[Mon Sep 16 22:14:36 2013] [warn] NameVirtualHost 00.000.000.000:80 has no VirtualHosts
    [Mon Sep 16 22:14:36 2013] [warn] NameVirtualHost 00.000.000.000:443 has no VirtualHosts
    [Mon Sep 16 22:14:36 2013] [warn] NameVirtualHost *:80 has no VirtualHosts
     ... waiting [Mon Sep 16 22:14:37 2013] [warn] NameVirtualHost 00.000.000.000:80 has no VirtualHosts
    [Mon Sep 16 22:14:37 2013] [warn] NameVirtualHost 900.000.000.000:443 has no VirtualHosts
    [Mon Sep 16 22:14:37 2013] [warn] NameVirtualHost *:80 has no VirtualHosts
    . ok
    
    I think that means it is not installed if I have not received an error message.

    Should I reinstall?

    Again thank you for the time you take me for help.
     

Share This Page