Boot on suse 11.1 Raid1

Discussion in 'Installation/Configuration' started by roli, Oct 1, 2009.

  1. roli

    roli New Member


    On server with SCSI two disk I have problems with boot server on fresh installation suse 11.1.

    When put new installation

    I create on sda1 /boot (ext3),
    sda2 /swap and
    sda3 /RAID (option no formatting),

    on sdb1 RAID (option no formatting)and the same location as sda3.

    Then create array raid1 on dev/md0 and put sda3 and sdb1 on ext3 /.

    Installation goes without errors but at first restart server on booting hung up.
    I think there is a problem with Grub bootloader but I don'n know where to start problem.

    For interesting works suse 10.3 at this server fine with same configuration as I create on suse 11.1.

    Please help me.

  2. falko

    falko Super Moderator ISPConfig Developer

    What's in /boot/grub/men.lst and /etc/fstab?
    What's the output of
    fdisk -l
  3. roli

    roli New Member

    I don't know how to look fdisk-l because it's in the middle of installation when is first boot (when suse install) hung up but I can see this in boot configuration for default grub.


    kernel /vmlinuz root=/dev/md0 vga=0x317 resume=dev/sda2 splash=silent showtops

    setup -stage2 = /boot/grub/stage2 (hd0,0) (hd0,0)

    filename /grub/

    (fd0) /dev/fd0
    (hd0) /dev/sda
    (hd1) /dev/sdb


Share This Page