Apache2 does not restart

Discussion in 'Installation/Configuration' started by mymmo73, Dec 27, 2020.

  1. mymmo73

    mymmo73 Member

    Hi, I installed ispconfig 3 on debian 10 following this guide "https://www.howtoforge.com/perfect-server-debian-10-buster-apache-bind-dovecot-ispconfig-3-1/" everything was fine , then I tried to enable ssl for ispconfig following this guide "https://www.howtoforge.com/tutorial/securing-ispconfig-3-with-a-free-lets-encrypt-ssl-certificate/" then I completed the procedure at the end I tried to restart Apache2 but it does not restart for the following reason
    Code:
    [email protected]:/usr/local/ispconfig/interface/ssl# systemctl status apache2.service
    ● apache2.service - The Apache HTTP Server
       Loaded: loaded (/lib/systemd/system/apache2.service; enabled; vendor preset:
       Active: failed (Result: exit-code) since Sat 2020-12-26 23:42:37 CET; 2min 5s
         Docs: https://httpd.apache.org/docs/2.4/
      Process: 29465 ExecStart=/usr/sbin/apachectl start (code=exited, status=1/FAIL
    
    Dec 26 23:42:37 server systemd[1]: Starting The Apache HTTP Server...
    Dec 26 23:42:37 server apachectl[29465]: AH00548: NameVirtualHost has no effect
    Dec 26 23:42:37 server apachectl[29465]: AH00526: Syntax error on line 65 of /et
    Dec 26 23:42:37 server apachectl[29465]: SSLCertificateFile: file '/usr/local/is
    Dec 26 23:42:37 server apachectl[29465]: Action 'start' failed.
    Dec 26 23:42:37 server apachectl[29465]: The Apache error log may have more info
    Dec 26 23:42:37 server systemd[1]: apache2.service: Control process exited, code
    Dec 26 23:42:37 server systemd[1]: apache2.service: Failed with result 'exit-cod
    Dec 26 23:42:37 server systemd[1]: Failed to start The Apache HTTP Server.
    lines 1-15/15 (END)...skipping...
    below you can consult the log
    Code:
    [email protected]:~# less /var/log/apache2/error.log
    [Sat Dec 26 16:33:30.104435 2020] [:error] [pid 9217:tid 140547407709312] python_init: Python version mismatch, expected '2.7.5+', found '2.7.16'.
    [Sat Dec 26 16:33:30.104689 2020] [:error] [pid 9217:tid 140547407709312] python_init: Python executable found '/usr/bin/python'.
    [Sat Dec 26 16:33:30.104696 2020] [:error] [pid 9217:tid 140547407709312] python_init: Python path being used '/usr/lib/python2.7:/usr/lib/python2.7/plat-x86_64-linux-gnu:/usr/lib/python2.7/lib-tk:/usr/lib/python2.7/lib-old:/usr/lib/python2.7/lib-dynload'.
    [Sat Dec 26 16:33:30.104726 2020] [:notice] [pid 9217:tid 140547407709312] mod_python: Creating 8 session mutexes based on 6 max processes and 25 max threads.
    [Sat Dec 26 16:33:30.104733 2020] [:notice] [pid 9217:tid 140547407709312] mod_python: using mutex_directory /tmp
    [Sat Dec 26 16:33:30.140843 2020] [mpm_event:notice] [pid 9217:tid 140547407709312] AH00489: Apache/2.4.38 (Debian) mod_fcgid/2.3.9 mod_python/3.3.1 Python/2.7.16 configured -- resuming normal operations
    [Sat Dec 26 16:33:30.140893 2020] [core:notice] [pid 9217:tid 140547407709312] AH00094: Command line: '/usr/sbin/apache2'
    [Sat Dec 26 16:33:34.121710 2020] [mpm_event:notice] [pid 9217:tid 140547407709312] AH00491: caught SIGTERM, shutting down
    [Sat Dec 26 16:33:34.246626 2020] [:error] [pid 10985] python_init: Python version mismatch, expected '2.7.5+', found '2.7.16'.
    [Sat Dec 26 16:33:34.246863 2020] [:error] [pid 10985] python_init: Python executable found '/usr/bin/python'.
    [Sat Dec 26 16:33:34.246871 2020] [:error] [pid 10985] python_init: Python path being used '/usr/lib/python2.7:/usr/lib/python2.7/plat-x86_64-linux-gnu:/usr/lib/python2.7/lib-tk:/usr/lib/python2.7/lib-old:/usr/lib/python2.7/lib-dynload'.
    [Sat Dec 26 16:33:34.246912 2020] [:notice] [pid 10985] mod_python: Creating 8 session mutexes based on 150 max processes and 0 max threads.
    [Sat Dec 26 16:33:34.246919 2020] [:notice] [pid 10985] mod_python: using mutex_directory /tmp
    [Sat Dec 26 16:33:34.264470 2020] [mpm_prefork:notice] [pid 10985] AH00163: Apache/2.4.38 (Debian) mod_fcgid/2.3.9 mod_python/3.3.1 Python/2.7.16 configured -- resuming normal operations
    [Sat Dec 26 16:33:34.264507 2020] [core:notice] [pid 10985] AH00094: Command line: '/usr/sbin/apache2'
    [Sat Dec 26 16:33:34.738653 2020] [mpm_prefork:notice] [pid 10985] AH00169: caught SIGTERM, shutting down
    [Sat Dec 26 16:33:34.934121 2020] [:error] [pid 11050] python_init: Python version mismatch, expected '2.7.5+', found '2.7.16'.
    [Sat Dec 26 16:33:34.934210 2020] [:error] [pid 11050] python_init: Python executable found '/usr/bin/python'.
    [Sat Dec 26 16:33:34.934216 2020] [:error] [pid 11050] python_init: Python path being used '/usr/lib/python2.7:/usr/lib/python2.7/plat-x86_64-linux-gnu:/usr/lib/python2.7/lib-tk:/usr/lib/python2.7/lib-old:/usr/lib/python2.7/lib-dynload'.
    [Sat Dec 26 16:33:34.934238 2020] [:notice] [pid 11050] mod_python: Creating 8 session mutexes based on 150 max processes and 0 max threads.
    [Sat Dec 26 16:33:34.934244 2020] [:notice] [pid 11050] mod_python: using mutex_directory /tmp
    [Sat Dec 26 16:33:34.953521 2020] [mpm_prefork:notice] [pid 11050] AH00163: Apache/2.4.38 (Debian) mod_fcgid/2.3.9 mod_python/3.3.1 Python/2.7.16 configured -- resuming normal operations
    [Sat Dec 26 16:33:34.953559 2020] [core:notice] [pid 11050] AH00094: Command line: '/usr/sbin/apache2'
    [Sat Dec 26 16:33:36.013219 2020] [mpm_prefork:notice] [pid 11050] AH00169: caught SIGTERM, shutting down
    [ 2020-12-26 16:33:36.1725 11167/7f9254c60980 age/Wat/WatchdogMain.cpp:1291 ]: Starting Passenger watchdog...
    [ 2020-12-26 16:33:36.1874 11170/7f9e58885980 age/Cor/CoreMain.cpp:982 ]: Starting Passenger core...
    [ 2020-12-26 16:33:36.1876 11170/7f9e58885980 age/Cor/CoreMain.cpp:235 ]: Passenger core running in multi-application mode.
    [ 2020-12-26 16:33:36.1890 11170/7f9e58885980 age/Cor/CoreMain.cpp:732 ]: Passenger core online, PID 11170
    [ 2020-12-26 16:33:36.2051 11175/7fd81d75d980 age/Ust/UstRouterMain.cpp:529 ]: Starting Passenger UstRouter...
    [ 2020-12-26 16:33:36.2070 11175/7fd81d75d980 age/Ust/UstRouterMain.cpp:342 ]: Passenger UstRouter online, PID 11175
    
    [ 2020-12-26 16:33:36.2090 11170/7f9e57f96700 age/Cor/CoreMain.cpp:532 ]: Signal received. Gracefully shutting down... (send signal 2 more time(s) to force shutdown)
    [ 2020-12-26 16:33:36.2091 11170/7f9e58885980 age/Cor/CoreMain.cpp:901 ]: Received command to shutdown gracefully. Waiting until all clients have disconnected...
    [ 2020-12-26 16:33:36.2091 11170/7f9e57714700 Ser/Server.h:817 ]: [ApiServer] Freed 0 spare client objects
    [ 2020-12-26 16:33:36.2091 11170/7f9e57714700 Ser/Server.h:464 ]: [ApiServer] Shutdown finished
    [ 2020-12-26 16:33:36.2092 11170/7f9e57f96700 Ser/Server.h:817 ]: [ServerThr.1] Freed 128 spare client objects
    [ 2020-12-26 16:33:36.2092 11170/7f9e57f96700 Ser/Server.h:464 ]: [ServerThr.1] Shutdown finished
    
    [ 2020-12-26 16:33:36.2144 11175/7fd81d65e700 age/Ust/UstRouterMain.cpp:422 ]: Signal received. Gracefully shutting down... (send signal 2 more time(s) to force shutdown)
    [ 2020-12-26 16:33:36.2144 11175/7fd81d75d980 age/Ust/UstRouterMain.cpp:492 ]: Received command to shutdown gracefully. Waiting until all clients have disconnected...
    [ 2020-12-26 16:33:36.2145 11175/7fd81d65e700 Ser/Server.h:464 ]: [UstRouter] Shutdown finished
    [ 2020-12-26 16:33:36.2145 11175/7fd81cddc700 Ser/Server.h:817 ]: [UstRouterApiServer] Freed 0 spare client objects
    [ 2020-12-26 16:33:36.2145 11175/7fd81cddc700 Ser/Server.h:464 ]: [UstRouterApiServer] Shutdown finished
    [ 2020-12-26 16:33:36.2148 11175/7fd81d75d980 age/Ust/UstRouterMain.cpp:523 ]: Passenger UstRouter shutdown finished
    /var/log/apache2/error.log
    
    thanks for your help
     
  2. Taleman

    Taleman Well-Known Member HowtoForge Supporter

     
  3. mymmo73

    mymmo73 Member

    thanks for your intervention, on which file should you intervene and how?
     
  4. Th0m

    Th0m ISPConfig Developer Staff Member ISPConfig Developer

    You are only sharing part of the error, if you widen your SSH window you can get the full message and copy it.

    What is the output of
    Code:
    ls /usr/local/ispconfig/interface/ssl
    ? I think you removed the cert file and didn't replace it correctly as done in the tutorial.
     
  5. mymmo73

    mymmo73 Member

    I think I have found the file affected by the problem but I cannot understand where it is
    Code:
    login as: root
    [email protected]'s password:
    Linux server 4.19.0-13-amd64 #1 SMP Debian 4.19.160-2 (2020-11-28) x86_64
    
    The programs included with the Debian GNU/Linux system are free software;
    the exact distribution terms for each program are described in the
    individual files in /usr/share/doc/*/copyright.
    
    Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
    permitted by applicable law.
    Last login: Sun Dec 27 09:33:27 2020 from 95.246.116.178
    [email protected]:~# less /etc/apache2/sites-enabled/000-ispconfig.vhost
        </FilesMatch>
      </Directory>
      <Directory /usr/local/ispconfig/interface/web/>
        <FilesMatch "\.ph(p3?|tml)$">
          SetHandler None
        </FilesMatch>
      </Directory>
    
      <IfModule mod_fcgid.c>
        DocumentRoot /var/www/ispconfig/
        SuexecUserGroup ispconfig ispconfig
        <Directory /var/www/ispconfig/>
          Options -Indexes +FollowSymLinks +MultiViews +ExecCGI
          AllowOverride AuthConfig Indexes Limit Options FileInfo
          <FilesMatch "\.php$">
            SetHandler fcgid-script
          </FilesMatch>
          FCGIWrapper /var/www/php-fcgi-scripts/ispconfig/.php-fcgi-starter .php
                Require all granted
              </Directory>
        IPCCommTimeout  7200
        MaxRequestLen 15728640
      </IfModule>
    
      <IfModule mpm_itk_module>
        DocumentRoot /usr/local/ispconfig/interface/web/
        AssignUserId ispconfig ispconfig
        AddType application/x-httpd-php .php
        <Directory /usr/local/ispconfig/interface/web>
          # php_admin_value open_basedir "/usr/local/ispconfig/interface:/usr/share:/tmp"
          Options +FollowSymLinks
          AllowOverride None
                Require all granted
                php_value magic_quotes_gpc        0
        </Directory>
      </IfModule>
    
      # ErrorLog /var/log/apache2/error.log
      # CustomLog /var/log/apache2/access.log combined
      ServerSignature Off
    
      <IfModule mod_security2.c>
        SecRuleEngine Off
      </IfModule>
    
      # SSL Configuration
      SSLEngine On
        SSLProtocol All -SSLv3 -TLSv1 -TLSv1.1
        SSLCertificateFile /usr/local/ispconfig/interface/ssl/ispserver.crt
    log file: s /etc/apache2/sites-enabled/000-ispconfig.vhost
    
    Code:
    login as: root
    [email protected]'s password:
    Linux server 4.19.0-13-amd64 #1 SMP Debian 4.19.160-2 (2020-11-28) x86_64
    
    The programs included with the Debian GNU/Linux system are free software;
    the exact distribution terms for each program are described in the
    individual files in /usr/share/doc/*/copyright.
    
    Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
    permitted by applicable law.
    Last login: Sun Dec 27 09:33:27 2020 from 95.246.116.178
    [email protected]:~# less /etc/apache2/sites-enabled/000-ispconfig.vhost
    [email protected]:~# ls /usr/local/ispconfig/interface/ssl
    empty.dir  ispserver.crt  ispserver.crt-201226233658.bak  ispserver.csr  ispserver.key  ispserver.key-201226233709.bak  ispserver.key.secure
    [email protected]:~# less /etc/apache2/sites-enabled/000-ispconfig.vhost
    
      <IfModule mpm_itk_module>
        DocumentRoot /usr/local/ispconfig/interface/web/
        AssignUserId ispconfig ispconfig
        AddType application/x-httpd-php .php
        <Directory /usr/local/ispconfig/interface/web>
          # php_admin_value open_basedir "/usr/local/ispconfig/interface:/usr/share:/tmp"
          Options +FollowSymLinks
          AllowOverride None
                Require all granted
                php_value magic_quotes_gpc        0
        </Directory>
      </IfModule>
    
      # ErrorLog /var/log/apache2/error.log
      # CustomLog /var/log/apache2/access.log combined
      ServerSignature Off
    
      <IfModule mod_security2.c>
        SecRuleEngine Off
      </IfModule>
    
      # SSL Configuration
      SSLEngine On
        SSLProtocol All -SSLv3 -TLSv1 -TLSv1.1
        SSLCertificateFile /usr/local/ispconfig/interface/ssl/ispserver.crt
      SSLCertificateKeyFile /usr/local/ispconfig/interface/ssl/ispserver.key
      #SSLCACertificateFile /usr/local/ispconfig/interface/ssl/ispserver.bundle
    
      SSLCipherSuite ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384
      SSLHonorCipherOrder On
    
      <IfModule mod_headers.c>
        # ISPConfig 3.1 currently requires unsafe-line for both scripts and styles, as well as unsafe-eval
        Header set Content-Security-Policy "default-src 'self' 'unsafe-inline' 'unsafe-eval'; img-src 'self' data:; object-src 'none'"
        Header set Content-Security-Policy "default-src 'self' 'unsafe-inline' 'unsafe-eval'; img-src 'self' data:; object-src 'none'; upgrade-insecure-requests"
        Header set X-Content-Type-Options: nosniff
        Header set X-Frame-Options: SAMEORIGIN
        Header set X-XSS-Protection: "1; mode=block"
        Header always edit Set-Cookie (.*) "$1; HTTPOnly"
        Header always edit Set-Cookie (.*) "$1; Secure"
        <IfVersion >= 2.4.7>
            Header setifempty Strict-Transport-Security "max-age=15768000"
        </IfVersion>
        <IfVersion < 2.4.7>
            Header set Strict-Transport-Security "max-age=15768000"
        </IfVersion>
        RequestHeader unset Proxy early
    :
    
     
    Last edited: Dec 27, 2020
  6. mymmo73

    mymmo73 Member

    yes I removed some files manually leaving the original ones, then I redid the tutorial procedure again, surely I made some mess, to follow the files you requested:
    Code:
    [email protected]:~# ls /usr/local/ispconfig/interface/ssl
    empty.dir  ispserver.crt  ispserver.crt-201226233658.bak  ispserver.csr  ispserver.key  ispserver.key-201226233709.bak  ispserver.key.secure
    [email protected]:~#
     
  7. mymmo73

    mymmo73 Member

    I also have this other problem "AH00548: NameVirtualHost has no effect and will be removed in the next release /etc/apache2/sites-enabled/000-ispconfig.vhost:7"
     
  8. Th0m

    Th0m ISPConfig Developer Staff Member ISPConfig Developer

    Can you share the full error from Apache?
     
  9. mymmo73

    mymmo73 Member

    you mean this?
    Code:
    [email protected]:~# systemctl status apache2.service
    ● apache2.service - The Apache HTTP Server
       Loaded: loaded (/lib/systemd/system/apache2.service; enabled; vendor preset: enabled)
       Active: failed (Result: exit-code) since Sun 2020-12-27 09:52:12 CET; 1min 21s ago
         Docs: https://httpd.apache.org/docs/2.4/
      Process: 11718 ExecStart=/usr/sbin/apachectl start (code=exited, status=1/FAILURE)
    
    Dec 27 09:52:12 server systemd[1]: Starting The Apache HTTP Server...
    Dec 27 09:52:12 server apachectl[11718]: AH00548: NameVirtualHost has no effect and will be removed in the next release /etc/apache2/sites-enabled/000-ispconfig.vhost:7
    Dec 27 09:52:12 server apachectl[11718]: AH00526: Syntax error on line 65 of /etc/apache2/sites-enabled/000-ispconfig.vhost:
    Dec 27 09:52:12 server apachectl[11718]: SSLCertificateFile: file '/usr/local/ispconfig/interface/ssl/ispserver.crt' does not exist or is empty
    Dec 27 09:52:12 server apachectl[11718]: Action 'start' failed.
    Dec 27 09:52:12 server apachectl[11718]: The Apache error log may have more information.
    Dec 27 09:52:12 server systemd[1]: apache2.service: Control process exited, code=exited, status=1/FAILURE
    Dec 27 09:52:12 server systemd[1]: apache2.service: Failed with result 'exit-code'.
    Dec 27 09:52:12 server systemd[1]: Failed to start The Apache HTTP Server.
     
  10. Taleman

    Taleman Well-Known Member HowtoForge Supporter

    Yes.
    Next step: you examine file
    /etc/apache2/sites-enabled/000-ispconfig.vhost
    and see what is on line 65 and the line before that. Like the error messages advice, apache log may have more info.
     
  11. mymmo73

    mymmo73 Member

    ok this turned out
    Code:
    [email protected]:~# less /etc/apache2/sites-enabled/000-ispconfig.vhost
         47       Options +FollowSymLinks
         48       AllowOverride None
         49             Require all granted
         50             php_value magic_quotes_gpc        0
         51     </Directory>
         52   </IfModule>
         53
         54   # ErrorLog /var/log/apache2/error.log
         55   # CustomLog /var/log/apache2/access.log combined
         56   ServerSignature Off
         57
         58   <IfModule mod_security2.c>
         59     SecRuleEngine Off
         60   </IfModule>
         61
         62   # SSL Configuration
         63   SSLEngine On
         64     SSLProtocol All -SSLv3 -TLSv1 -TLSv1.1
         65     SSLCertificateFile /usr/local/ispconfig/interface/ssl/ispserver.crt
         66   SSLCertificateKeyFile /usr/local/ispconfig/interface/ssl/ispserver.key
         67   #SSLCACertificateFile /usr/local/ispconfig/interface/ssl/ispserver.bundle
         68
         69   SSLCipherSuite ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20     69 -POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384
         70   SSLHonorCipherOrder On
         71
         72   <IfModule mod_headers.c>
         73     # ISPConfig 3.1 currently requires unsafe-line for both scripts and styles, as well as unsafe-eval
         74     Header set Content-Security-Policy "default-src 'self' 'unsafe-inline' 'unsafe-eval'; img-src 'self' data:; object-src 'none'"
         75     Header set Content-Security-Policy "default-src 'self' 'unsafe-inline' 'unsafe-eval'; img-src 'self' data:; object-src 'none'; upgrade-insecure-requests"
         76     Header set X-Content-Type-Options: nosniff
         77     Header set X-Frame-Options: SAMEORIGIN
         78     Header set X-XSS-Protection: "1; mode=block"
         79     Header always edit Set-Cookie (.*) "$1; HTTPOnly"
         80     Header always edit Set-Cookie (.*) "$1; Secure"
         81     <IfVersion >= 2.4.7>
         82         Header setifempty Strict-Transport-Security "max-age=15768000"
         83     </IfVersion>
         84     <IfVersion < 2.4.7>
         85         Header set Strict-Transport-Security "max-age=15768000"
         86     </IfVersion>
         87     RequestHeader unset Proxy early
         88   </IfModule>
         89
         90     SSLUseStapling On
         91   SSLStaplingResponderTimeout 5
         92   SSLStaplingReturnResponderErrors Off
         93   </VirtualHost>
    (END)
    
     
  12. Taleman

    Taleman Well-Known Member HowtoForge Supporter

    Code:
    ls -lh /usr/local/ispconfig/interface/ssl/ispserver.*
    
     
  13. mymmo73

    mymmo73 Member

    Code:
    [email protected]:~# ls -lh /usr/local/ispconfig/interface/ssl/ispserver.*
    lrwxrwxrwx 1 root root   58 Dec 26 23:39 /usr/local/ispconfig/interface/ssl/ispserver.crt -> /etc/letsencrypt/live/server.tradingforum.it/fullchain.pem
    lrwxrwxrwx 1 root root   58 Dec 26 19:44 /usr/local/ispconfig/interface/ssl/ispserver.crt-201226233658.bak -> /etc/letsencrypt/live/server.tradingforum.it/fullchain.pem
    -rwxr-x--- 1 root root 1.8K Dec 26 18:26 /usr/local/ispconfig/interface/ssl/ispserver.csr
    lrwxrwxrwx 1 root root   56 Dec 26 23:39 /usr/local/ispconfig/interface/ssl/ispserver.key -> /etc/letsencrypt/live/server.tradingforum.it/privkey.pem
    lrwxrwxrwx 1 root root   56 Dec 26 19:44 /usr/local/ispconfig/interface/ssl/ispserver.key-201226233709.bak -> /etc/letsencrypt/live/server.tradingforum.it/privkey.pem
    -rwxr-x--- 1 root root 3.3K Dec 26 18:20 /usr/local/ispconfig/interface/ssl/ispserver.key.secure
    [email protected]:~#
    
     
  14. Th0m

    Th0m ISPConfig Developer Staff Member ISPConfig Developer

    Can you try starting apache with
    Code:
    systemctl start apache2
    ?
    There is nothing wrong with the ISPConfig vhost, the problem is with your cert.
    Can you share the content of
    /etc/letsencrypt/live/server.tradingforum.it with
    Code:
    ls -la /etc/letsencrypt/live/server.tradingforum.it
     
  15. mymmo73

    mymmo73 Member

    Code:
    [email protected]:~# systemctl start apache2
    Job for apache2.service failed because the control process exited with error code.
    See "systemctl status apache2.service" and "journalctl -xe" for details.
    [email protected]:~# ls -la /etc/letsencrypt/live/server.tradingforum.it
    ls: cannot access '/etc/letsencrypt/live/server.tradingforum.it': No such file or directory
    [email protected]:~#
    
    it appears that the certificate does not exist:confused:
     
  16. Taleman

    Taleman Well-Known Member HowtoForge Supporter

  17. Th0m

    Th0m ISPConfig Developer Staff Member ISPConfig Developer

    Is the LE checkbox checked for server.tradingforum.it?
     
  18. mymmo73

    mymmo73 Member

    note that it is not the real image of my ispconfig, it is an image recovered in the network to make me understand better
    if you mean this I had selected them

    [​IMG]
     
    Last edited: Dec 28, 2020
  19. mymmo73

    mymmo73 Member

    I also ran this guide https://www.faqforge.com/linux/debugging-ispconfig-3-server-actions-in-case-of-a-failure/ but it doesn't give me any errors, regarding the ispconfig and certbot I exclude them as the server was created 4 days ago, I searched the whole network for similar problems but I did not find anything that suits me, at this point I know that I have to reinstall, the server you what do you think?
     
  20. Th0m

    Th0m ISPConfig Developer Staff Member ISPConfig Developer

    You can recover this by putting back the .bak files for the cert and then starting apache, issueing the cert for your server, check if it worked, and then go through the guide to use that cert for the panel.
     

Share This Page