ALSA on kernel 2.6-15-2 issues

Discussion in 'Installation/Configuration' started by yuheng108, Feb 4, 2006.

  1. yuheng108

    yuheng108 New Member

    hi, I compile ALSA as modules on my kernel 2.6-15-2, but for some weird reason, I can play songs but I can't not hear a thing, I did alsaconf, and I used alsamixer to turn up the volumes too, but it's still not working, can somebody please help me
     
  2. falko

    falko Super Moderator

    Which distribution do you use? Which soundcard? Can you see anything related to this in the logs under /var/log, or any error messages during system bootup? You can see all bootup messages by running the command
    Code:
    dmesg
     
  3. yuheng108

    yuheng108 New Member

    Freeing initrd memory: 3480k freed
    NET: Registered protocol family 16
    EISA bus registered
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfd7ce, last bus=7
    PCI: Using MMCONFIG
    ACPI: Subsystem revision 20050902
    ACPI-0339: *** Error: Looking up [Z00A] in namespace, AE_NOT_FOUND
    search_node c1462ca0 start_node c1462ca0 return_node 00000000
    ACPI: Interpreter enabled
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    Boot video device is 0000:00:02.0
    PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
    PCI quirk: region 1180-11bf claimed by ICH6 GPIO
    PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    ACPI: Embedded Controller [EC0] (gpe 29)
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
    PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
    PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
    PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
    PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
    PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1
    PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2
    PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2
    PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2
    PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
    PCI: Bridge: 0000:00:1c.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1c.1
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1c.2
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bus 7, cardbus bridge: 0000:06:01.0
    IO window: 00002400-000024ff
    IO window: 00002800-000028ff
    PREFETCH window: 30000000-31ffffff
    MEM window: 34000000-35ffffff
    PCI: Bridge: 0000:00:1e.0
    IO window: 2000-2fff
    MEM window: b0100000-b01fffff
    PREFETCH window: 30000000-31ffffff
    ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    ACPI: PCI Interrupt 0000:00:1c.1 -> GSI 16 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:1c.1 to 64
    ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 18 (level, low) -> IRQ 18
    Simple Boot Flag at 0x36 set to 0x1
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Initializing Cryptographic API
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered
    ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[pcie00]
    Allocate Port Service[pcie02]
    Allocate Port Service[pcie03]
    ACPI: PCI Interrupt 0000:00:1c.1 -> GSI 16 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:1c.1 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[pcie00]
    Allocate Port Service[pcie02]
    Allocate Port Service[pcie03]
    ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[pcie00]
    Allocate Port Service[pcie02]
    Allocate Port Service[pcie03]
    ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
    serio: i8042 AUX port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
    mice: PS/2 mouse device common for all mice
    EISA: Probing bus 0 at eisa.0
    NET: Registered protocol family 2
    IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    TCP established hash table entries: 16384 (order: 4, 65536 bytes)
    TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
    TCP: Hash tables configured (established 16384 bind 16384)
    TCP reno registered
    TCP bic registered
    NET: Registered protocol family 8
    NET: Registered protocol family 20
    Using IPI Shortcut mode
    ACPI wakeup devices:
    AZAL RP01 RP02 RP04 USB1 USB2 USB3 USB4 USB7 LANC
    ACPI: (supports S0 S3 S4 S5)
    RAMDISK: cramfs filesystem found at block 0
    RAMDISK: Loading 3480KiB [1 disk] into ram disk... <6>input: AT Translated Set 2 keyboard as /class/input/input0
    done.
    VFS: Mounted root (cramfs filesystem) readonly.
    Freeing unused kernel memory: 216k freed
    NET: Registered protocol family 1
    SCSI subsystem initialized
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    ICH6: IDE controller at PCI slot 0000:00:1f.1
    ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
    ICH6: chipset revision 4
    ICH6: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:DMA

    _______________________________________________________________
    _______________________________________________________________
    I think that's the error, how do you fix this????
     
  4. falko

    falko Super Moderator

    I don't see any ALSA-specific errors here... :confused:
     
  5. yuheng108

    yuheng108 New Member

    snd: version magic '2.6.15.2 PENTIUMM gcc-4.0' should be '2.6.15.2 PENTIUMM gcc-3.3'


    now it's that, it won't even show me anything? what can I do?
     

Share This Page