550 relay not permitted

Discussion in 'General' started by pititis, Jan 7, 2011.

  1. pititis

    pititis Member

    Hello

    I get this error trying to sending mail to my server ("550 relay not permitted"). Email authentication in customers side is enabled. Here is my mail.log

    Code:
    Jan  7 17:52:00 2x2online postfix/smtpd[21807]: connect from 1.Red-79-151-20.dynamicIP.rima-tde.net[79.151.20.1]
    Jan  7 17:52:04 2x2online postfix/smtpd[21807]: 1A1CD16A11C: client=1.Red-79-151-20.dynamicIP.rima-tde.net[79.151.20.1], sasl_method=LOGIN, sasl_username=admin@2x2online.net
    Jan  7 17:52:10 2x2online postfix/cleanup[21817]: 1A1CD16A11C: message-id=<>
    Jan  7 17:52:10 2x2online postfix/qmgr[21805]: 1A1CD16A11C: from=<admin@2x2online.net>, size=911, nrcpt=1 (queue active)
    Jan  7 17:52:11 2x2online postfix/smtpd[21821]: warning: cannot get RSA certificate from file /etc/postfix/smtpd.cert: disabling TLS support
    Jan  7 17:52:11 2x2online postfix/smtpd[21821]: warning: TLS library problem: 21821:error:02001002:system library:fopen:No such file or directory:bss_file.c:356:fopen('/etc/postfix/smtpd.cert','r'):
    Jan  7 17:52:11 2x2online postfix/smtpd[21821]: warning: TLS library problem: 21821:error:20074002:BIO routines:FILE_CTRL:system lib:bss_file.c:358:
    Jan  7 17:52:11 2x2online postfix/smtpd[21821]: warning: TLS library problem: 21821:error:140DC002:SSL routines:SSL_CTX_use_certificate_chain_file:system lib:ssl_rsa.c:722:
    Jan  7 17:52:11 2x2online postfix/smtpd[21821]: connect from localhost[127.0.0.1]
    Jan  7 17:52:11 2x2online postfix/smtpd[21821]: 3933616A11D: client=localhost[127.0.0.1]
    Jan  7 17:52:11 2x2online postfix/cleanup[21817]: 3933616A11D: message-id=<20110107165211.3933616A11D@2x2online.net>
    Jan  7 17:52:11 2x2online postfix/qmgr[21805]: 3933616A11D: from=<admin@2x2online.net>, size=1407, nrcpt=1 (queue active)
    Jan  7 17:52:11 2x2online amavis[983]: (00983-17) Passed CLEAN, [79.151.20.1] [79.151.20.1] <admin@2x2online.net> -> <admin@2x2online.net>, mail_id: iwJ1tgVQ5DQD, Hits: -0.754, size: 911, queued_as: 3933616A11D, 304 ms
    Jan  7 17:52:11 2x2online postfix/smtpd[21821]: disconnect from localhost[127.0.0.1]
    Jan  7 17:52:11 2x2online postfix/smtp[21818]: 1A1CD16A11C: to=<admin@2x2online.net>, relay=127.0.0.1[127.0.0.1]:10024, delay=7.4, delays=7.1/0.01/0.01/0.31, dsn=2.0.0, status=sent (250 2.0.0 Ok, id=00983-17, from MTA([127.0.0.1]:10025): 250 2.0.0 Ok: queued as 3933616A11D)
    Jan  7 17:52:11 2x2online postfix/qmgr[21805]: 1A1CD16A11C: removed
    Jan  7 17:52:11 2x2online postfix/smtpd[21807]: disconnect from 1.Red-79-151-20.dynamicIP.rima-tde.net[79.151.20.1]
    Jan  7 17:52:14 2x2online postfix/smtp[21822]: 3933616A11D: to=<admin@2x2online.net>, relay=213.133.107.241[213.133.107.241]:25, delay=3, delays=0.01/0.02/3/0.01, dsn=5.0.0, status=bounced (host 213.133.107.241[213.133.107.241] said: 550 relay not permitted (in reply to RCPT TO command))
    Jan  7 17:52:14 2x2online postfix/cleanup[21817]: 446D316A11E: message-id=<20110107165214.446D316A11E@2x2online.net>
    Jan  7 17:52:14 2x2online postfix/qmgr[21805]: 446D316A11E: from=<>, size=3338, nrcpt=1 (queue active)
    Jan  7 17:52:14 2x2online postfix/bounce[21823]: 3933616A11D: sender non-delivery notification: 446D316A11E
    Jan  7 17:52:14 2x2online postfix/qmgr[21805]: 3933616A11D: removed
    Jan  7 17:52:17 2x2online postfix/smtp[21822]: 446D316A11E: to=<admin@2x2online.net>, relay=213.133.107.241[213.133.107.241]:25, delay=3, delays=0.02/0/3/0.01, dsn=5.0.0, status=bounced (host 213.133.107.241[213.133.107.241] said: 550 relay not permitted (in reply to RCPT TO command))
    Jan  7 17:52:17 2x2online postfix/qmgr[21805]: 446D316A11E: removed
    
    ... my main.cf

    Code:
    # See /usr/share/postfix/main.cf.dist for a commented, more complete version
    
    
    # Debian specific:  Specifying a file name will cause the first
    # line of that file to be used as the name.  The Debian default
    # is /etc/mailname.
    #myorigin = /etc/mailname
    
    smtpd_banner = $myhostname ESMTP $mail_name
    biff = no
    
    # appending .domain is the MUA's job.
    append_dot_mydomain = no
    
    # Uncomment the next line to generate "delayed mail" warnings
    #delay_warning_time = 4h
    
    readme_directory = /usr/share/doc/postfix
    
    # TLS parameters
    smtpd_tls_cert_file = /etc/postfix/smtpd.cert
    smtpd_tls_key_file = /etc/postfix/smtpd.key
    smtpd_use_tls = yes
    smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache
    smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache
    
    # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for
    # information on enabling SSL in the smtp client.
    
    myhostname = 2x2online.net
    alias_maps = hash:/etc/aliases
    alias_database = hash:/etc/aliases
    myorigin = /etc/mailname
    mydestination = localhost, localhost.localdomain, mail.2x2online.net
    relayhost = 213.133.107.241
    mynetworks = 127.0.0.0/8 [::1]/128
    mailbox_size_limit = 0
    recipient_delimiter = +
    inet_interfaces = all
    html_directory = /usr/share/doc/postfix/html
    virtual_alias_domains = 
    virtual_alias_maps = proxy:mysql:/etc/postfix/mysql-virtual_forwardings.cf, mysql:/etc/postfix/mysql-virtual_email2email.cf
    virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf
    virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf
    virtual_mailbox_base = /var/vmail
    virtual_uid_maps = static:5000
    virtual_gid_maps = static:5000
    smtpd_sasl_auth_enable = yes
    broken_sasl_auth_clients = yes
    smtpd_sasl_authenticated_header = yes
    smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, check_recipient_access mysql:/etc/postfix/mysql-virtual_recipient.cf, reject_unauth_destination
    smtpd_tls_security_level = may
    transport_maps = proxy:mysql:/etc/postfix/mysql-virtual_transports.cf
    relay_domains = mysql:/etc/postfix/mysql-virtual_relaydomains.cf
    relay_recipient_maps = mysql:/etc/postfix/mysql-virtual_relayrecipientmaps.cf
    virtual_create_maildirsize = yes
    virtual_maildir_extended = yes
    virtual_mailbox_limit_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailbox_limit_maps.cf
    virtual_mailbox_limit_override = yes
    virtual_maildir_limit_message = "The user you are trying to reach is over quota."
    virtual_overquota_bounce = yes
    proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $virtual_mailbox_limit_maps
    smtpd_sender_restrictions = check_sender_access mysql:/etc/postfix/mysql-virtual_sender.cf
    smtpd_client_restrictions = check_client_access mysql:/etc/postfix/mysql-virtual_client.cf
    maildrop_destination_concurrency_limit = 1
    maildrop_destination_recipient_limit = 1
    virtual_transport = maildrop
    header_checks = regexp:/etc/postfix/header_checks
    mime_header_checks = regexp:/etc/postfix/mime_header_checks
    nested_header_checks = regexp:/etc/postfix/nested_header_checks
    body_checks = regexp:/etc/postfix/body_checks
    content_filter = amavis:[127.0.0.1]:10024
    receive_override_options = no_address_mappings
    message_size_limit = 0
    smtp_sasl_auth_enable = no
    smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd
    smtp_sasl_security_options = 
    
    ...master.cf

    Code:
    #
    # Postfix master process configuration file.  For details on the format
    # of the file, see the master(5) manual page (command: "man 5 master").
    #
    # Do not forget to execute "postfix reload" after editing this file.
    #
    # ==========================================================================
    # service type  private unpriv  chroot  wakeup  maxproc command + args
    #               (yes)   (yes)   (yes)   (never) (100)
    # ==========================================================================
    smtp      inet  n       -       -       -       -       smtpd
    #submission inet n       -       -       -       -       smtpd
    #  -o smtpd_tls_security_level=encrypt
    #  -o smtpd_sasl_auth_enable=yes
    #  -o smtpd_client_restrictions=permit_sasl_authenticated,reject
    #  -o milter_macro_daemon_name=ORIGINATING
    #smtps     inet  n       -       -       -       -       smtpd
    #  -o smtpd_tls_wrappermode=yes
    #  -o smtpd_sasl_auth_enable=yes
    #  -o smtpd_client_restrictions=permit_sasl_authenticated,reject
    #  -o milter_macro_daemon_name=ORIGINATING
    #628       inet  n       -       -       -       -       qmqpd
    pickup    fifo  n       -       -       60      1       pickup
    cleanup   unix  n       -       -       -       0       cleanup
    qmgr      fifo  n       -       n       300     1       qmgr
    #qmgr     fifo  n       -       -       300     1       oqmgr
    tlsmgr    unix  -       -       -       1000?   1       tlsmgr
    rewrite   unix  -       -       -       -       -       trivial-rewrite
    bounce    unix  -       -       -       -       0       bounce
    defer     unix  -       -       -       -       0       bounce
    trace     unix  -       -       -       -       0       bounce
    verify    unix  -       -       -       -       1       verify
    flush     unix  n       -       -       1000?   0       flush
    proxymap  unix  -       -       n       -       -       proxymap
    proxywrite unix -       -       n       -       1       proxymap
    smtp      unix  -       -       -       -       -       smtp
    # When relaying mail as backup MX, disable fallback_relay to avoid MX loops
    relay     unix  -       -       -       -       -       smtp
    	-o smtp_fallback_relay=
    #       -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
    showq     unix  n       -       -       -       -       showq
    error     unix  -       -       -       -       -       error
    retry     unix  -       -       -       -       -       error
    discard   unix  -       -       -       -       -       discard
    local     unix  -       n       n       -       -       local
    virtual   unix  -       n       n       -       -       virtual
    lmtp      unix  -       -       -       -       -       lmtp
    anvil     unix  -       -       -       -       1       anvil
    scache    unix  -       -       -       -       1       scache
    #
    # ====================================================================
    # Interfaces to non-Postfix software. Be sure to examine the manual
    # pages of the non-Postfix software to find out what options it wants.
    #
    # Many of the following services use the Postfix pipe(8) delivery
    # agent.  See the pipe(8) man page for information about ${recipient}
    # and other message envelope options.
    # ====================================================================
    #
    # maildrop. See the Postfix MAILDROP_README file for details.
    # Also specify in main.cf: maildrop_destination_recipient_limit=1
    #
    maildrop  unix  -       n       n       -       -       pipe
      flags=DRhu user=vmail argv=/usr/bin/maildrop -d vmail ${extension} ${recipient} ${user} ${nexthop} ${sender}
    #
    # ====================================================================
    #
    # Recent Cyrus versions can use the existing "lmtp" master.cf entry.
    #
    # Specify in cyrus.conf:
    #   lmtp    cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4
    #
    # Specify in main.cf one or more of the following:
    #  mailbox_transport = lmtp:inet:localhost
    #  virtual_transport = lmtp:inet:localhost
    #
    # ====================================================================
    #
    # Cyrus 2.1.5 (Amos Gouaux)
    # Also specify in main.cf: cyrus_destination_recipient_limit=1
    #
    #cyrus     unix  -       n       n       -       -       pipe
    #  user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
    #
    # ====================================================================
    # Old example of delivery via Cyrus.
    #
    #old-cyrus unix  -       n       n       -       -       pipe
    #  flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user}
    #
    # ====================================================================
    #
    # See the Postfix UUCP_README file for configuration details.
    #
    uucp      unix  -       n       n       -       -       pipe
      flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
    #
    # Other external delivery methods.
    #
    ifmail    unix  -       n       n       -       -       pipe
      flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
    bsmtp     unix  -       n       n       -       -       pipe
      flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
    scalemail-backend unix	-	n	n	-	2	pipe
      flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
    mailman   unix  -       n       n       -       -       pipe
      flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
      ${nexthop} ${user}
    
    
    amavis unix - - - - 2 smtp
            -o smtp_data_done_timeout=1200
            -o smtp_send_xforward_command=yes
    
    127.0.0.1:10025 inet n - - - - smtpd
            -o content_filter=
            -o local_recipient_maps=
            -o relay_recipient_maps=
            -o smtpd_restriction_classes=
            -o smtpd_client_restrictions=
            -o smtpd_helo_restrictions=
            -o smtpd_sender_restrictions=
            -o smtpd_recipient_restrictions=permit_mynetworks,reject
            -o mynetworks=127.0.0.0/8
            -o strict_rfc821_envelopes=yes
            -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks
            -o smtpd_bind_address=127.0.0.1
    
    ... dig mx mydomain :

    Code:
    ; <<>> DiG 9.7.0-P1 <<>> mx 2x2online.net
    ;; global options: +cmd
    ;; Got answer:
    ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 5661
    ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0
    
    ;; QUESTION SECTION:
    ;2x2online.net.			IN	MX
    
    ;; ANSWER SECTION:
    2x2online.net.		75	IN	MX	10 mail.2x2online.net.
    
    ;; Query time: 127 msec
    ;; SERVER: 8.8.8.8#53(8.8.8.8)
    ;; WHEN: Fri Jan  7 18:10:57 2011
    ;; MSG SIZE  rcvd: 52
    
    ... telnet to port 25 ouput:

    Code:
    Trying 127.0.0.1...
    Connected to localhost.
    Escape character is '^]'.
    220 2x2online.net ESMTP Postfix
    ehlo localhost
    250-2x2online.net
    250-PIPELINING
    250-SIZE
    250-VRFY
    250-ETRN
    250-STARTTLS
    250-AUTH PLAIN LOGIN
    250-AUTH=PLAIN LOGIN
    250-ENHANCEDSTATUSCODES
    250-8BITMIME
    250 DSN
    
    Port 25 is available from internet too. I'm sorry, I have read the forum but I cant find where the error is.

    Any Idea people please??
     
  2. pititis

    pititis Member

    Well, I found the error. Maybe a bug of ispconfig?

    In "Email Routing" was set to 213.133.107.241 BUT this rule was deactivated days ago. When you unset the small active checkbox it seems don't work. I have re-check and I can confirm this issue, I am using ispconfig 3.0.3.2 (fresh updated from 3.0.3.1). Can anyone test it in his server?

    Best regards!
     
  3. till

    till Super Moderator Staff Member ISPConfig Developer

    Please check the file /etc/postfix/mysql-virtual_transports.cf

    it should contain like this:

    additional_conditions = and active = 'y' and server_id = 1

    which enforces that postfix reads only active rules.
     

Share This Page