1.1.0 Error: Installation stops

Discussion in 'General' started by toffie, Sep 23, 2006.

  1. toffie

    toffie Member

    Hey all..
    registered today, but I've been using your forums and howtos like crazy before :p

    I love them all and they are really handy when needed!

    however.. now I have a problem with MyDNS..
    http://swemod.com/mydns_error_060923.png

    I cant get out what may be wrong from that, but I guessed maybe it was
    mySQL devel libs and stuff that wasnt installed.. I tried to install those but
    it said I already got those..

    running Fedora Core 5..

    Hope you have some help for me!
    Thank you in advance!
     
  2. falko

    falko Super Moderator ISPConfig Developer

    I don't see any errors in the screenshot so I guess everything's fine (although I don't understand what "Inget ..." means ;) ).
     
  3. toffie

    toffie Member

    hehe yeah thats the hard part.. I need to choose english next time I reinstall my server so it would be easier to get help when I sometimes need it..

    Inget means nothing..

    (Inget behöver göras för 'all-am')
    means, Nothing needs to be done with 'all-am'..

    if its correctly translated to Swedish..

    no errors.. =/
    but.. I cant do make and make install..

    not like normal "install" for other programs where it says completed when finished..
    or maybe this install doesnt say its completed??


    EDIT
    I get this when I run ./configure
    so it doesnt look like any problems here..? ;)

    Code:
      ###
      ###  MyDNS 1.1.0 configured.  Using MySQL database.
      ###
      ###  Type "make" to build, then "make install" to install.
      ###
    

    after running make
    Code:
    make[3]: Leaving directory `/tmp/mydns-1.1.0/src/util'
    make[3]: Entering directory `/tmp/mydns-1.1.0/src'
    make[3]: Inget behöver göras för "all-am".
    make[3]: Leaving directory `/tmp/mydns-1.1.0/src'
    make[2]: Leaving directory `/tmp/mydns-1.1.0/src'
    make[2]: Entering directory `/tmp/mydns-1.1.0'
    make[2]: Inget behöver göras för "all-am".
    make[2]: Leaving directory `/tmp/mydns-1.1.0'
    make[1]: Leaving directory `/tmp/mydns-1.1.0'
    
     
    Last edited: Sep 24, 2006
  4. toffie

    toffie Member

    oh man.. when I runned it like.. what is it now.. like the fourth time with ./configure, make and make install it finally works .. :eek:

    you made my puter work falko!! ;)

    thank you for the help so far.. I guess I'll stick around in the forums.. I think I'll get some more problems soon.. when testing something new, thats always how it goes ;)
     
  5. Traffic

    Traffic New Member

    Help...

    Hello...

    I am having the same problem...

    after untarring the file in the /tmp/ directory - I run ./configure it seems to work just fine...

    I run 'make' - and get some errors at the end:

    Code:
    cache.c: In function âcache_free_nodeâ:
    cache.c:336: error: invalid lvalue in assignment
    cache.c:340: error: invalid lvalue in assignment
    make[3]: *** [cache.o] Error 1
    make[3]: Leaving directory `/tmp/mydns-1.0.0/src/mydns'
    make[2]: *** [all-recursive] Error 1
    make[2]: Leaving directory `/tmp/mydns-1.0.0/src'
    make[1]: *** [all-recursive] Error 1
    make[1]: Leaving directory `/tmp/mydns-1.0.0'
    make: *** [all] Error 2
    I run 'make install' - and get some more errors:

    Code:
    cache.c: In function âcache_free_nodeâ:
    cache.c:336: error: invalid lvalue in assignment
    cache.c:340: error: invalid lvalue in assignment
    make[2]: *** [cache.o] Error 1
    make[2]: Leaving directory `/tmp/mydns-1.0.0/src/mydns'
    make[1]: *** [install-recursive] Error 1
    make[1]: Leaving directory `/tmp/mydns-1.0.0/src'
    make: *** [install-recursive] Error 1
    The reason this came up - is when I go to:

    'make conf'

    I get the following error:

    Code:
      ###
      ###  MyDNS binary not found - please compile MyDNS first
      ###  by running "make".
      ###
    Any ideas...?

    Thank you for your help...


    ...
     
  6. falko

    falko Super Moderator ISPConfig Developer

    Which distribution do you use? What's the ouput of
    Code:
    uname -a
    ?
     
  7. Traffic

    Traffic New Member

    That is a good question and point... I was following the guide found here at howtoforge:

    http://www.howtoforge.com/mydns_name_server

    and, I did not even check for the latest version... I downloaded 1.0.0... and, see there is a 1.1.0 out now...

    So, I decided to try to install it... And, of course when I do a:

    wget http://mydns.bboy.net/download/mydns-1.1.0.tar.gz

    I get the following response:

    Code:
    [email protected]:/tmp# wget http://mydns.bboy.net/download/mydns-1.1.0.tar.gz
    --09:01:21--  http://mydns.bboy.net/download/mydns-1.1.0.tar.gz
               => `mydns-1.1.0.tar.gz'
    Resolving mydns.bboy.net... 204.251.8.100
    Connecting to mydns.bboy.net|204.251.8.100|:80... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: 726,052 (709K) [application/x-tar]
    mydns-1.1.0.tar.gz: Read-only file system
    
    Cannot write to `mydns-1.1.0.tar.gz' (Read-only file system).
    I am pretty new to installing and setting things up in Linux - but, not too new when it comes to programming... heh... and, I can't figure this one out... Still looking though - but, if you have any suggestions for me on that - they would be greatly appreciated...


    ...
     
    Last edited: Nov 13, 2006
  8. Traffic

    Traffic New Member

    Oh...

    Code:
    Linux ANDE-SERVER 2.6.17-10-generic #2 SMP Fri Oct 13 18:45:35 UTC 2006 i686 GNU/Linux
    is the result for uname -a...


    ...
     
  9. Traffic

    Traffic New Member

    Ok...

    I was able to run:

    Code:
    mount -t ext3 -o remount rw /
    and, install the mydns-1.1.0 instead...

    Everything worked good...

    Thank you again for your help...


    ...
     

Share This Page