Security

Want to support HowtoForge? Become a subscriber!
 

Squid Proxy Server On Ubuntu 9.04 Server With DansGuardian, ClamAV, And WPAD (Proxy Auto-Detection) [Updated 07-08-09]

Squid Proxy Server On Ubuntu 9.04 Server With DansGuardian, ClamAV, And WPAD (Proxy Auto-Detection)

This tutorial will demonstrate how to set up a Squid Proxy server on Ubuntu 9.04 with DansGuardian (for content filtering) and ClamAV (for Virus scanning); in addition, we will set up Web Proxy AutoDetection (WPAD) through DHCP (in this case, either dhcp3 OR the Windows Server 2003 DHCP server) or DNS so that the only configuration necessary on the client side is to check "Auto-detect proxy settings for this network" in Firefox or Internet Explorer. At the end of the tutorial, users will have a fully functional and secure proxy for HTTP access. In addition, the final section will show users how to connect to this proxy server via SSH in order to have a protected browsing session while away from the home/office.

Using IP Service Object In Firewall Builder

Using IP Service Object In Firewall Builder

This article continues the series of articles on Fireall Builder, a graphical firewall configuration and management tool that supports many Open Source firewall platforms as well as Cisco IOS access lists and Cisco ASA (PIX). This article demonstrates how you can work with IP Service object in Firewall Builder.

How To Configure SSH Keys Authentication With PuTTY And Linux Server In 5 Quick Steps

How To Configure SSH Keys Authentication With PuTTY And Linux Server In 5 Quick Steps

This tutorial explains how you can replace password-based SSH authentication with key-based authentication which is more secure because only the people that own the key can log in. In this example, we're using PuTTY as our SSH client on a Windows system.

Using Network, Address Range Objects And Groups Of Addresses Objects In Firewall Builder

Using Network, Address Range Objects And Groups Of Addresses Objects In Firewall Builder

This article continues the series of articles on Fireall Builder, a graphical firewall configuration and management tool that supports many Open Source firewall platforms as well as Cisco IOS access lists and Cisco ASA (PIX). This article demonstrates how you can work with Network, Address Range and Groups of Objects objects in Firewall Builder.

Using IP And MAC Address Objects In Firewall Builder

Using IP And MAC Address Objects In Firewall Builder

This article continues the series of articles on Fireall Builder, a graphical firewall configuration and management tool that supports many Open Source firewall platforms as well as Cisco IOS access lists and Cisco ASA (PIX). This article demonstrates how you can work with IPv4, IPv6 and MAC Address objects in Firewall Builder.

The Perfect SpamSnake - Ubuntu Jaunty Jackalope

The Perfect SpamSnake - Ubuntu Jaunty Jackalope

This tutorial shows how to set up an Ubuntu Jaunty Jackalope based server as a spamfilter in Gateway mode. In the end, you will have a SpamSnake Gateway which will relay clean emails to your MTA. You will also be able to view your incoming queue, train your SpamSnake and carry out a few more advanced operations via MailWatch.

Virtual Users And Domains With Postfix, Courier, MySQL And SquirrelMail (Ubuntu 9.04)

Virtual Users And Domains With Postfix, Courier, MySQL And SquirrelMail (Ubuntu 9.04)

This document describes how to install a Postfix mail server that is based on virtual users and domains, i.e. users and domains that are in a MySQL database. I'll also demonstrate the installation and configuration of Courier (Courier-POP3, Courier-IMAP), so that Courier can authenticate against the same MySQL database Postfix uses. In addition to that, this tutorial covers the installation of Amavisd, SpamAssassin and ClamAV so that emails will be scanned for spam and viruses. I will also show how to install SquirrelMail as a webmail interface so that users can read and send emails and change their passwords.

Using The Interface Object In Firewall Builder

Using The Interface Object In Firewall Builder

This article continues the series of articles on Fireall Builder, a graphical firewall configuration and management tool that supports many Open Source firewall platforms as well as Cisco IOS access lists and Cisco ASA (PIX). This article demonstrates how you can work with Interface objects in Firewall Builder.

iRedMail: Mail Server With LDAP, Postfix, RoundCube, Dovecot, ClamAV, SpamAssassin, Amavisd (Debian 5.0.1)

iRedMail: Mail Server With LDAP, Postfix, RoundCube/SquirrelMail, Dovecot, ClamAV, SpamAssassin, Amavisd, DKIM, SPF On Debian 5 (Lenny)

iRedMail is a shell script that lets you quickly deploy a full-featured mail solution in less than 2 minutes. Since iRedMail 0.5, it supports Debian 5.0.1 (it supports both i386 and x86_64). Its object is to make a Linux mail server installation and configuration simple and easy to use. iRedMail supports both OpenLDAP and MySQL as backends for storing virtual domains and users.This tutorial shows how to use OpenLDAP as the backend.

Using The Host Object In Firewall Builder

Using The Host Object In Firewall Builder

This article continues the series of articles on Fireall Builder, a graphical firewall configuration and management tool that supports many Open Source firewall platforms as well as Cisco IOS access lists and Cisco ASA (PIX). This article demonstrates how you can work with Host objects in Firewall Builder.

first page
previous page
...
23
...
next page
last page