- Web Server
- Control Panels
- Site Map/RSS Feeds
How To Set Up A DHCP Server For Your LAN
This tutorial describes how to set up a DHCP server (ISC-DHCP) for your local network. DHCP is short for "Dynamic Host Configuration Protocol", it's a protocol that handles the assignment of IP addresses, subnet masks, default routers, and other IP parameters to client PCs that don't have a static IP address. Such computers try to find a DHCP server in their local network which in turn assigns them an IP address, gateway, etc. so that they can connect to the internet or other computers from the local network.
ILOHAMAIL On Your ISPConfig Server Within 10 Easy Steps
IlohaMail comes with clear instructions, but with this how to, i like to explain how to get it working on our Perfect server with ISPConfig. This mini how to will help you to setup IlohaMail without SSL. When you are finished, you have a nice webmailclient at URL http://webmail.myhostingcompany.tld.
Easy RSS Syndication with MagpieRSS
MagpieRSS, affectionately known as Magpie, is an RSS and Atom parser for PHP. It allows you to display the newest articles from websites with RSS or Atom feeds on your own site. This is a great way to add new, fresh, and relevant information to your site. It parses RSS 0.9, RSS 1.0, and has some support for RSS 2.0 as well as Atom 0.3.
Integration of dbus and KDE: starting and stopping the session part of dbus with KDM
Since some time now a lot of applications make use of D-BUS. This is the case with KDE 3.5, the current stable release of KDE. With the upcomming KDE 4, D-BUS is getting more important, replacing DCOP. In this howto I want to describe a way to start and stop the user and session dependent part of dbus.
LDAP Authentication In Linux
This howto will show you howto store your users in LDAP and authenticate some of the services against it. I will not show howto install particular packages, as it is distribution/system dependant. I will focus on "pure" configuration of all componenets needed to have LDAP authentication/storage of users. The howto assumes somehow, that you are migrating from a regular passwd/shadow authentication, but it is also suitable for people who do it from scratch.
Linux GPRS/EDGE via Bluetooth HOWTO
In this guide I will show you howto configure internet access through GPRS/EDGE, using bluetooth connection with your GSM phone.
I am using gentoo and Nokia 6310i phone, but this will work with any distribution and any bluetooth capable phone.
Debian On PC Engines WRAP Board With Microdrive
When I read on the net about people running Linux on these tiny computers I was captivated by the idea of having a full-fledged Linux system that consumes less than 6W of power, and is completely silent, with no spinning fans and disks. One platform for doing this is the WRAP from PC Engines.
Removing A User
Employee turnover in most organizations runs high. So unless you run a small shop with a stable user base, you need to learn how to clean up after an employee leaves. Too many so-called system administrators do not understand the stakes involved when they manage users. Disgruntled former employees can often cause significant trouble for a company by gaining access to the network.
Syncing Websites to Your Palm for Offline Reading
This is a brief tutorial on how to sync websites to your palm for offline reading. The websites are stored in Plucker format. You will need to install the Plucker viewer for palm which can be found at the Plucker website. The software you will use to grab the websites and convert them into Plucker format is called Sunrise. To transfer the Plucker files to a Palm you will need pilot-link.
First of all im terribly sorry that i didnt post this in article section. The reason for this is that i have some more questions that go along with it, so please bear with me.
I own a Broadcom BCM4400 series 10/100 Mbps Ethernet Network Controller. When my knowledge was fairly basic (i.e i didnt know any shell programming at all) i was easily confused by Ubuntus graphic interface and i (okay, okay IM sorry :p ) thought it would be like windows, with the opening of files, double clicking on icons and so on. But there was one big problem NO internet. I mean NONE. And then i asked for help here in the forums for how to install ndiswrapper. No answer.... Apparently i had to get the .sys file put it on a USB key and install it for Linux. Except there was none. So i went into the .bat file and noticed this... ServiceBinary = %12%\bcm4sbxp.sys. It means the location of your system service's binary code.... "Your system's binary is actually nothing like that at... Source your stuff:P" - Unknown Hacker