vmware on dapper drake -missing NAT connection

[radox]

I set up vmware on dapper drake ubuntu with NAT (see ifonfig below(A) then suddenly yeaterday no more NAT (see what ifconfig looks like below(B)


why has NAT setting suddely dissaperared?
Happy New Year falko

(A)
eth0 Link encap:Ethernet HWaddr 00:0F:B0:5C:AF:1F
inet addr:192.168.1.64 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::20f:b0ff:fe5c:af1f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:370706 errors:0 dropped:0 overruns:0 frame:0
TX packets:369586 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:177062373 (168.8 MiB) TX bytes:146384318 (139.6 MiB)
Interrupt:201 Base address:0xcc00

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:719 errors:0 dropped:0 overruns:0 frame:0
TX packets:719 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:164176 (160.3 KiB) TX bytes:164176 (160.3 KiB)

sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

vmnet1 Link encap:Ethernet HWaddr 00:50:56:C0:00:01
inet addr:172.16.163.1 Bcast:172.16.163.255 Mask:255.255.255.0
inet6 addr: fe80::250:56ff:fec0:1/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

vmnet8 Link encap:Ethernet HWaddr 00:50:56:C0:00:08
inet addr:172.16.0.1 Bcast:172.16.0.255 Mask:255.255.255.0
inet6 addr: fe80::250:56ff:fec0:8/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:940 errors:0 dropped:0 overruns:0 frame:0
TX packets:78 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
collisions:0 txqueuelen:1000

------------------------------------------------------------------------------------

(B)


eth0 Link encap:Ethernet HWaddr 00:0F:B0:5C:AF:1F
inet addr:192.168.1.64 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::20f:b0ff:fe5c:af1f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:642580 errors:0 dropped:0 overruns:0 frame:0
TX packets:456962 errors:0 dropped:0 overruns:1 carrier:0
collisions:0 txqueuelen:1000
RX bytes:795955806 (759.0 MiB) TX bytes:87752831 (83.6 MiB)
Interrupt:201 Base address:0x6c00

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:244 errors:0 dropped:0 overruns:0 frame:0
TX packets:244 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:75318 (73.5 KiB) TX bytes:75318 (73.5 KiB)

[falko]

Happy New Year to you, too.

Have you tried to reboot the system?

[radox]

Thankyou falko re-boot was the answer.

I wonder if you might point me to a howto to encrypt a external usb hard drive?
I CANNOT boot into the external hard drive because of my BIOS on my labtop does not have this facility, I can only
save data on to the hard drive.

radox

[falko]

Originally Posted by radox

I wonder if you might point me to a howto to encrypt a external usb hard drive?

Take a look here: http://www.sdc.org/~leila/usb-dongle/readme.html
http://www.hermann-uwe.de/blog/howto...using-loop-aes