Navigation

hal2710 · #1 20th December 2006, 20:24

Hi

I have got as far as section 8

8 Install Some Software

Now we install a few packages that are needed later on. Run

apt-get install binutils cpp cpp-4.0 fetchmail flex gcc gcc-4.0 libarchive-zip-perl libc6-dev libcompress-zlib-perl libdb4.3-dev libpcre3 libpopt-dev linux-kernel-headers lynx m4 make ncftp nmap openssl perl perl-modules unzip zip zlib1g-dev autoconf automake1.9 libtool bison autotools-dev g++

(This command should go into one line!)

I get this error from Putty

Reading package lists... Done
Building dependency tree
Reading state information... Done
Package linux-kernel-headers is a virtual package provided by:
linux-libc-dev 2.6.17.1-10.34
You should explicitly select one to install.
E: Package linux-kernel-headers has no installation candidate

Q: Is this an error ??

I'm abit on the new side

Here is a cut and paste from the putty terminal of everthing I have done so for :-

Using username "root".
root@192.168.10.2's password:
Last login: Wed Dec 20 18:32:19 2006 from 192.168.0.200
Linux PugWash 2.6.17-10-server #2 SMP Fri Oct 13 18:47:26 UTC 2006 i686

The programs included with the Ubuntu system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
applicable law.
root@PugWash:~# hostname
PugWash
root@PugWash:~# hostname -f
PugWash
root@PugWash:~# apt-get update
Get: 1 http://security.ubuntu.com edgy-security Release.gpg [191B]
Ign http://security.ubuntu.com edgy-security/main Translation-en_GB
Ign http://security.ubuntu.com edgy-security/restricted Translation-en_GB
Ign http://security.ubuntu.com edgy-security/universe Translation-en_GB
Hit http://security.ubuntu.com edgy-security Release
Get: 2 http://de.archive.ubuntu.com edgy Release.gpg [191B]
Ign http://de.archive.ubuntu.com edgy/main Translation-en_GB
Ign http://de.archive.ubuntu.com edgy/restricted Translation-en_GB
Ign http://de.archive.ubuntu.com edgy/universe Translation-en_GB
Get: 3 http://de.archive.ubuntu.com edgy-updates Release.gpg [191B]
Ign http://de.archive.ubuntu.com edgy-updates/main Translation-en_GB
Ign http://de.archive.ubuntu.com edgy-updates/restricted Translation-en_GB
Get: 4 http://de.archive.ubuntu.com edgy Release [34.7kB]
Get: 5 http://de.archive.ubuntu.com edgy-updates Release [23.3kB]
Hit http://security.ubuntu.com edgy-security/main Packages
Hit http://security.ubuntu.com edgy-security/restricted Packages
Hit http://security.ubuntu.com edgy-security/main Sources
Get: 6 http://de.archive.ubuntu.com edgy/main Packages [940kB]
Hit http://security.ubuntu.com edgy-security/restricted Sources
Get: 7 http://security.ubuntu.com edgy-security/universe Packages [12.4kB]
Get: 8 http://security.ubuntu.com edgy-security/universe Sources [1476B]
Get: 9 http://de.archive.ubuntu.com edgy/restricted Packages [5974B]
Get: 10 http://de.archive.ubuntu.com edgy/main Sources [274kB]
Get: 11 http://de.archive.ubuntu.com edgy/restricted Sources [1436B]
Get: 12 http://de.archive.ubuntu.com edgy/universe Packages [3559kB]
Get: 13 http://de.archive.ubuntu.com edgy/universe Sources [1068kB]
Get: 14 http://de.archive.ubuntu.com edgy-updates/main Packages [45.7kB]
Get: 15 http://de.archive.ubuntu.com edgy-updates/restricted Packages [14B]
Get: 16 http://de.archive.ubuntu.com edgy-updates/main Sources [14.9kB]
Get: 17 http://de.archive.ubuntu.com edgy-updates/restricted Sources [14B]
Fetched 5981kB in 28s (209kB/s)
Reading package lists... Done
root@PugWash:~# apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages will be upgraded:
gnupg info linux-image-2.6.17-10-server tar x11-common
5 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 25.4MB of archives.
After unpacking 958kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get: 1 http://security.ubuntu.com edgy-security/main tar 1.15.91-2ubuntu0.3 [346kB]
Get: 2 http://de.archive.ubuntu.com edgy-updates/main x11-common 1:7.1.1ubuntu6.2 [291kB]
Get: 3 http://security.ubuntu.com edgy-security/main gnupg 1.4.3-2ubuntu3.2 [1056kB]
Get: 4 http://security.ubuntu.com edgy-security/main info 4.8.dfsg.1-1ubuntu0.1 [163kB]
Get: 5 http://security.ubuntu.com edgy-security/main linux-image-2.6.17-10-server 2.6.17.1-10.34 [23.6MB]
Fetched 25.4MB in 1m39s (256kB/s)
Preconfiguring packages ...
(Reading database ... 13890 files and directories currently installed.)
Preparing to replace tar 1.15.91-2 (using .../tar_1.15.91-2ubuntu0.3_i386.deb) ...
Unpacking replacement tar ...
Setting up tar (1.15.91-2ubuntu0.3) ...

(Reading database ... 13890 files and directories currently installed.)
Preparing to replace x11-common 1:7.1.1ubuntu6 (using .../x11-common_1%3a7.1.1ubuntu6.2_i386.deb) ...
Unpacking replacement x11-common ...
Preparing to replace gnupg 1.4.3-2ubuntu3 (using .../gnupg_1.4.3-2ubuntu3.2_i386.deb) ...
Unpacking replacement gnupg ...
Preparing to replace info 4.8.dfsg.1-1 (using .../info_4.8.dfsg.1-1ubuntu0.1_i386.deb) ...
Unpacking replacement info ...
Preparing to replace linux-image-2.6.17-10-server 2.6.17-10.33 (using .../linux-image-2.6.17-10-server_2.6.17.1-10.34_i386.deb) ...
The directory /lib/modules/2.6.17-10-server still exists. Continuing as directed.
Done.
Unpacking replacement linux-image-2.6.17-10-server ...
Running postrm hook /sbin/update-grub .
Searching for GRUB installation directory ... found: /boot/grub
Testing for an existing GRUB menu.list file ... found: /boot/grub/menu.lst
Searching for splash image ... none found, skipping ...
Found kernel: /boot/vmlinuz-2.6.17-10-server
Found kernel: /boot/memtest86+.bin
Updating /boot/grub/menu.lst ... done

Setting up x11-common (7.1.1ubuntu6.2) ...
System startup links for /etc/init.d/x11-common already exist.

Setting up gnupg (1.4.3-2ubuntu3.2) ...
Setting up info (4.8.dfsg.1-1ubuntu0.1) ...

Setting up linux-image-2.6.17-10-server (2.6.17.1-10.34) ...
Running depmod.
update-initramfs: Generating /boot/initrd.img-2.6.17-10-server
Not updating initrd symbolic links since we are being updated/reinstalled
(2.6.17-10.33 was configured last, according to dpkg)
Not updating image symbolic links since we are being updated/reinstalled
(2.6.17-10.33 was configured last, according to dpkg)
Running postinst hook /sbin/update-grub.
Searching for GRUB installation directory ... found: /boot/grub
Testing for an existing GRUB menu.list file ... found: /boot/grub/menu.lst
Searching for splash image ... none found, skipping ...
Found kernel: /boot/vmlinuz-2.6.17-10-server
Found kernel: /boot/memtest86+.bin
Updating /boot/grub/menu.lst ... done

root@PugWash:~# rm -f /bin/sh
root@PugWash:~# ln -s /bin/bash /bin/sh
root@PugWash:~# apt-get install binutils cpp cpp-4.0 fetchmail flex gcc gcc-4.0 libarchive-zip-perl libc6-dev libcompress-zlib-perl libdb4.3-dev libpcre3 libpopt-dev linux-kernel-headers lynx m4 make ncftp nmap openssl perl perl-modules unzip zip zlib1g-dev autoconf automake1.9 libtool bison autotools-dev g++
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package linux-kernel-headers is a virtual package provided by:
linux-libc-dev 2.6.17.1-10.34
You should explicitly select one to install.
E: Package linux-kernel-headers has no installation candidate
root@PugWash:~#
root@PugWash:~#

HTH as I don't want to go any further as I will probably mess things up.

Thanks

Hal2710

falko · #2 21st December 2006, 18:54

Please leave out the package linux-kernel-headers in the apt-get command and try again.

BTW, PugWash is no FQDN. Your hostname should be an FQDN.

hal2710 · #3 21st December 2006, 21:25

Hi Falko,

Thank you for the reply.

I have done as requested. The apt-get now works. Thank you again.

My Server setup is now complete :-)

http://hal2710.homeip.net

Please visit !!!!!

BTW What would you recommend as FQDN for PugWash@hal2710.homeip.net ?

This webserver is for personal use on my cable internet connection ! Any ideas ??

Any way thanks again for your help. Your website and the Perfect Setup Guide made the difference when thinking about my own webserver project. I am a Windows user but began with BBC Micro and Sinclair Spectrum 48K !! I have been grasping at Linux for a while and this Site is Brilliant to say the least.

Long may you 'ROCK' Amodeus

Hal2710 & Tabitha

*DaRKNeSS666NL* · #4 3rd January 2007, 12:05

Okee,

I am starting allover again. So I did an fresh install and got the same error, I already tried it myself without the linux-kernel-headers and then it's installing.

My Question dont we need the linux-kernel-headers any more?
I think it's maby already in the update/upgrade. Because thats the one thing that's differend whit my last install.

DaRKNeSS