Go Back   HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials > ISPConfig 2 > Installation/Configuration

Do you like HowtoForge? Please consider supporting us by becoming a subscriber.
Reply
 
Thread Tools Display Modes
  #1  
Old 20th December 2006, 09:51
edalb edalb is offline
Junior Member
 
Join Date: Dec 2006
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default ERROR: The PHP binary coming with ISPConfig does not work properly on your system!

Hi all.

When istalling ispconfig.
All goes fine untill I get the following error.

Quote:

ERROR: Could not configure SpamAssassin
cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/aps.tar.gz': No such file or directory
mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
mv: cannot stat `binaries/cronolog': No such file or directory
mv: cannot stat `binaries/cronosplit': No such file or directory
mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
mv: cannot stat `binaries/zip': No such file or directory
mv: cannot stat `binaries/unzip': No such file or directory
tar: spamassassin.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `spamassassin': No such file or directory
tar: uudeview.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `uudeview': No such file or directory
tar: clamav.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `clamav': No such file or directory
tar: aps.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
./setup2: line 860: ispconfig_tmp/php/bin/php: No such file or directory
ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!
Then it dies.

I am running ubunto 6.10.
I have installed all of the Packages required.

Regards
Reply With Quote
Sponsored Links
  #2  
Old 20th December 2006, 10:24
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 36,046
Thanks: 826
Thanked 5,388 Times in 4,233 Posts
Default

Hi,

there must be a error above the line "ERROR: Could not configure SpamAssassin" that explains why spamassassin could not be configured. Please post this error.
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
  #3  
Old 20th December 2006, 10:32
edalb edalb is offline
Junior Member
 
Join Date: Dec 2006
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Well I am not 100% sure what the error would be but here is where I think it is failing.

I am not such a big Ubuntu fan.

One note would this work on gentoo?

But here is a error.

Quote:
cp -f clamassassin /home/admispconfig/ispconfig/tools/clamav/bin
chmod 555 /home/admispconfig/ispconfig/tools/clamav/bin/clamassassin
Argument "6.30_01" isn't numeric in subroutine entry at Makefile.PL line 8.
Argument "6.30_01" isn't numeric in numeric ge (>=) at Makefile.PL line 136.
What email address or URL should be used in the suspected-spam report
text for users who want more information on your filter installation?
(In particular, ISPs should change this to a local Postmaster contact)
default text: [the administrator of that system]

NOTE: settings for "make test" are now controlled using "t/config.dist".
See that file if you wish to customise what tests are run, and how.

checking module dependencies and their versions...

************************************************** *************************
ERROR: the required Digest::SHA1 module is not installed.

The Digest::SHA1 module is used as a cryptographic hash for some
tests and the Bayes subsystem. It is also used by Razor2.


************************************************** *************************
ERROR: the required HTML::Parser (version 3.24) module is not installed.

Version 3.31 or later is recommended.

HTML is used for an ever-increasing amount of email so this dependency
is unavoidable. Run "perldoc -q html" for additional information.


************************************************** *************************
NOTE: the optional Net::DNS (version 0.34) module is not installed.

Used for all DNS-based tests (SBL, XBL, SpamCop, DSBL, etc.),
perform MX checks, and is also used when manually reporting spam to
SpamCop. Recommended.

If this is installed and you are using network tests of any variety
(which is the default), then you need to make sure the Net::DNS
version is sufficiently up-to-date:

- version 0.34 or higher on Unix systems
- version 0.46 or higher on Windows systems


************************************************** *************************
NOTE: the optional Mail::SPF::Query module is not installed.

Used to check DNS Sender Policy Framework (SPF) records to fight email
address forgery and make it easier to identify spams.


************************************************** *************************
NOTE: the optional IP::Country module is not installed.

Used by the RelayCountry plugin (not enabled by default) to determine
the domain country codes of each relay in the path of an email.


************************************************** *************************
NOTE: the optional Razor2 (version 2.61) module is not installed.

Used to check message signatures against Vipul's Razor collaborative
filtering network. Razor has a large number of dependencies on CPAN
modules. Feel free to skip installing it, if this makes you nervous;
SpamAssassin will still work well without it.

More info on installing and using Razor can be found
at http://wiki.apache.org/spamassassin/InstallingRazor .


************************************************** *************************
NOTE: the optional Net::Ident module is not installed.

If you plan to use the --auth-ident option to spamd, you will need
to install this module.


************************************************** *************************
NOTE: the optional IO::Socket::INET6 module is not installed.

This is required if the first nameserver listed in your IP
configuration or /etc/resolv.conf file is available only via
an IPv6 address.


************************************************** *************************
NOTE: the optional IO::Socket::SSL module is not installed.

If you wish to use SSL encryption to communicate between spamc and
spamd (the --ssl option to spamd), you need to install this
module. (You will need the OpenSSL libraries and use the
ENABLE_SSL="yes" argument to Makefile.PL to build and run an SSL
compatibile spamc.)


************************************************** *************************
NOTE: the optional LWP::UserAgent module is not installed.

The "sa-update" script requires this module to make HTTP requests.


************************************************** *************************
NOTE: the optional HTTP::Date module is not installed.

The "sa-update" script requires this module to make HTTP
If-Modified-Since GET requests.


************************************************** *************************
NOTE: the optional Archive::Tar (version 1.23) module is not installed.

The "sa-update" script requires this module to access tar update
archive files.


************************************************** *************************
NOTE: the optional IO::Zlib (version 1.04) module is not installed.

The "sa-update" script requires this module to access compressed
update archive files.

REQUIRED module missing: Digest::SHA1
REQUIRED module missing: HTML::Parser
optional module missing: Net::DNS
optional module missing: Mail::SPF::Query
optional module missing: IP::Country
optional module missing: Razor2
optional module missing: Net::Ident
optional module missing: IO::Socket::INET6
optional module missing: IO::Socket::SSL
optional module missing: LWP::UserAgent
optional module missing: HTTP::Date
optional module missing: Archive::Tar
optional module missing: IO::Zlib

warning: some functionality may not be available,
please read the above report before continuing!

ERROR: Could not configure SpamAssassin
cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/aps.tar.gz': No such file or directory
mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
mv: cannot stat `binaries/cronolog': No such file or directory
mv: cannot stat `binaries/cronosplit': No such file or directory
mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
mv: cannot stat `binaries/zip': No such file or directory
mv: cannot stat `binaries/unzip': No such file or directory
tar: spamassassin.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `spamassassin': No such file or directory
tar: uudeview.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `uudeview': No such file or directory
tar: clamav.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `clamav': No such file or directory
tar: aps.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
./setup2: line 860: ispconfig_tmp/php/bin/php: No such file or directory
ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!

Reply With Quote
  #4  
Old 20th December 2006, 10:36
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 36,046
Thanks: 826
Thanked 5,388 Times in 4,233 Posts
 
Default

You missed to install some required perl modules, please run:

Quote:
apt-get install libhtml-parser-perl libdb-file-lock-perl libnet-dns-perl
Thats described in the perfect setup guide in step 18:

http://www.howtoforge.com/perfect_setup_ubuntu_6.10_p7

Ubuntu is not officially supported by ISPConfig.
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
ERROR: The PHP binary coming with ISPConfig does not work properly on your system! qvindesland Installation/Configuration 22 21st May 2007 16:05
ERROR: The PHP binary coming with ISPConfig does not work properly on your system! micko_escalade Installation/Configuration 35 30th March 2007 11:31
The PHP binary coming with ISPConfig does not work properly on your system! lykos Installation/Configuration 3 1st April 2006 07:53
ERROR: The PHP binary coming with ISPConfig does not work properly on your system! max Installation/Configuration 6 13th January 2006 22:07
ISPConfig system stoped johnking Installation/Configuration 7 27th October 2005 02:37


All times are GMT +2. The time now is 20:19.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.