Go Back   HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials > ISPConfig 3 > ISPConfig 3 Priority Support

Do you like HowtoForge? Please consider supporting us by becoming a subscriber.
Reply
 
Thread Tools Display Modes
  #11  
Old 18th July 2013, 06:27
danhansen@denmark danhansen@denmark is offline
Senior Member
 
Join Date: Mar 2013
Posts: 247
Thanks: 53
Thanked 4 Times in 4 Posts
Post Link OK, but...

Hi Till,


Regarding the PDF's:

The link works, a PDF generated site appears... But it's in landscape !?! Is this the way you ment it to be?
And to view in PDF I don't have to do something out of the ordinary? Just hit "View in PDF" in the tutorial at the website, right?


Regarding "Two BASE System" / "Mirror Setup":

1. From the ISPconfig 3 manual, page 45, in the top...
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
Edit the sources.list file...

vi /etc/apt/sources.list

... and ensure that your /etc/apt/sources.list contains the squeeze-updates repository (this makes sure
you always get the newest updates for the ClamAV virus scanner - this project publishes releases very often, and
sometimes old versions stop working).

[...]
deb http://ftp.de.debian.org/debian/ squeeze-updates main
[...]

---------------------------------------------------------------------------------------------------------------------------------------------------------------------

What about this? There will be places in the "Setup The Two Servers" guide that might have to be done in anothe way because I'm using Ubuntu Server 12.04.2 instead of debian..


2. Same site, next step:

It is a good idea to synchronize the system clock with an NTP (network time protocol) server over the Internet.
Simply run

apt-get -y install ntp ntpdate

But in the Ubuntu tutorial this step is done this way:

apt-get install ntp ntpdate


Can I follow the guide in the "ISPconfig 3 Manual" when I'm using Ubuntu 12.04.2 instead of Debian... I know I asked about this before, it's just that back the I didn't know about these issues!


3. Is there a chance for you to run the guide/in the manual through a make some note's here in this post about "Step's to do the Ubuntu Way" or Just point out the places in the "Mirror Setup"/"Two Base System" and then I can try to find the Ubuntu command's myself, in the "ThePerfectServer-ISPconfig3-Ubuntu12.04-Apache2-Dove-Bind....etc"


4. To setup the mirror system, "The Two Base System" - All steps from page 43 - 72 are to be followed, right?


5. Regarding your post earlier on, I just have to ask one more time to be safe. If I follow the "Two Base System" guide in the "ISPconfig 3 Manual" page 43 - 72, then it is this "Undison or Unison" that is used !?!? Like you recommended !?!?

"....I recommend to use undison for the filesystem sync as its described in the mirror guide of the manual and not glusterfs. Glusterfs gets really slwo when you have a lot of small files like it is common for web servers. We had a old setup that used glusterfs but the performance was bad so the new guide that is part of the current manual uses unison..."

OK! Didn't notice this the first time I read the guide So, plase disregard question "5"

".....In the following tutorial, Unison is used to share
contents between the master and the slave server..."



I'm looking so much forward to hear from you again
__________________
Kind Regards
Dan

__________________________________________________ _______
Fixed IP/WAN
DMZ -> "ispserverip"
Primary NameServer -> ns1.myprimarynameserver.tld
Secondary NameServer -> ns2.somedomainservice.tld

Ubuntu Server 12.04.4
ISPconfig 3 v.3.0.5.2 (Single Server Setup)
NameServer: BIND v.9.8.1-P1
SquirrelMail: v.1.4.22
MailServer: PostFix v.2.9.6 - IMAP/POP3 Dovecot v.2.0.19
Database: MySQL Server v.5.5.29-0ubuntu0.12.04.2
Tutorial: "ThePerfectServer-ISPconfig3-Ubuntu12.04"

Last edited by danhansen@denmark; 18th July 2013 at 07:47. Reason: Just learned a thing or two !!! "#%&/%"//"/"&"/&%
Reply With Quote
Sponsored Links
  #12  
Old 18th July 2013, 08:42
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lneburg, Germany
Posts: 36,395
Thanks: 833
Thanked 5,490 Times in 4,322 Posts
Default

Quote:
The link works, a PDF generated site appears... But it's in landscape !?! Is this the way you ment it to be?
Yes. Thats intended as some of the longer commands wont fit otherwise.

1-5) Some package names may differ, but the overall setup should be the same. I havent set this up on Ubuntu yet so I acnt tell you in detail which steps differ. Basically you can install the "main" software like apache,postfix, mysql, pure-ftpd etc. as described in the ubuntu guide. From the mirror guide you have to follow the instructions for mysql replication, unison installation and the ispconfig installation part.
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
  #13  
Old 18th July 2013, 09:17
danhansen@denmark danhansen@denmark is offline
Senior Member
 
Join Date: Mar 2013
Posts: 247
Thanks: 53
Thanked 4 Times in 4 Posts
Exclamation Edit the sources.list file..

Hi Till,


Regarding PDF:


I see! Of course..... Thanks...



Regarding "Mirror System"/"Two Base System":

1. From the ISPconfig 3 manual, page 45, in the top... Do I just disregard this or what do I do here?:


(LONG VERSION)
Edit the sources.list file...
vi /etc/apt/sources.list
... and ensure that your /etc/apt/sources.list contains the squeeze-updates repository (this makes sure
you always get the newest updates for the ClamAV virus scanner - this project publishes releases very often, and
sometimes old versions stop working).

[...]
deb http://ftp.de.debian.org/debian/ squeeze-updates main
[...]


It's this I noticed: ".....contains the squeeze-updates repository..." ".....makes sure you always get the newest updates for the ClamAV virus scanner - this project publishes releases very often, and sometimes old versions stop working..."

Is it this I have to do when it's Ubuntu Server 12.04 or is it not a problem when it's Ubuntu!? :

STEP 8 Edit /etc/apt/sources.list And Update Your Linux Installation
Edit /etc/apt/sources.list. Comment out or remove the installation CD from the file and make sure that the universe and multiverse repositories are enabled. It should look like this:
vi /etc/apt/sources.list


This is allready done, in both cases "ThePerfectServer-Ubuntu12.04-BIND-Dovecot...etc" Tutorial STEP 1-8 (10) and "ThePerfectServer-DebianSqueeze-BIND-Dovecot...etc" Tutorial STEP 1-8 !?!?


(SHORT VERSION)
How do I do this when I'm using Ubuntu Server 12.04.2 ?:

Edit the sources.list file...
vi /etc/apt/sources.list
... and ensure that your /etc/apt/sources.list contains the squeeze-updates repository (this makes sure
you always get the newest updates for the ClamAV virus scanner - this project publishes releases very often, and
sometimes old versions stop working).


I'm just confused because it's allready done in STEP 7 in "ThePerfectServer-DebianSqueeze-BIND-Dovecot...etc" - exactly the same thing, I think!?!



2. Regarding STEP "VI /etc/hosts" in the guide:

In the "ThePerfectServer-ISPconfig3-Ubuntu12.04-etc..." tutorial, we were told to set it up like this:
127.0.0.1 localhost.localdomain localhost
192.168.0.100 server1.example.tld server1

In the guide/in debian it's set up like this:
127.0.0.1 localhost
192.168.0.105 server1.example.tld
192.168.0.106 server2.example.tld

So what about:
" .localdomain localhost"
" server1"

Do I need to change this? or is this ok?:
127.0.0.1 localhost.localdomain localhost
192.168.0.105 server1.example.tld server1
192.168.0.106 server2.example.tld server2

It's the extra field with localhost/server1/server2 + .localdomain . I guess it's because it's Ubuntu that it's done this way, or what say you Mr. Brehm

Again, I'm sorry for asking, but it's because I'm still a novice I'm asking, I don't know what might be important and what might not be !?!



3. Next "STEP" - Why do we have to setup the hostname again? We did it in STEP 1 - 8 (10 for Ubuntu) in the "ThePerfectServer-ISPconfig3-Ubuntu12.04-etc..." Is it just to be sure that the second server is setup with "server2......." ?!?

.
__________________
Kind Regards
Dan

__________________________________________________ _______
Fixed IP/WAN
DMZ -> "ispserverip"
Primary NameServer -> ns1.myprimarynameserver.tld
Secondary NameServer -> ns2.somedomainservice.tld

Ubuntu Server 12.04.4
ISPconfig 3 v.3.0.5.2 (Single Server Setup)
NameServer: BIND v.9.8.1-P1
SquirrelMail: v.1.4.22
MailServer: PostFix v.2.9.6 - IMAP/POP3 Dovecot v.2.0.19
Database: MySQL Server v.5.5.29-0ubuntu0.12.04.2
Tutorial: "ThePerfectServer-ISPconfig3-Ubuntu12.04"

Last edited by danhansen@denmark; 18th July 2013 at 10:42. Reason: Just remembered ....
Reply With Quote
  #14  
Old 18th July 2013, 15:11
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lneburg, Germany
Posts: 36,395
Thanks: 833
Thanked 5,490 Times in 4,322 Posts
Default

1) Thats debian specific, you can skip it on ubuntu.
2) Change it to:

127.0.0.1 localhost.localdomain localhost
192.168.0.105 server1.example.tld
192.168.0.106 server2.example.tld

3) Just ensure that its set correctly. If you did it already, then you can skip it. The multiserver guides are often used on servers ith preconfigured operating systems which were not setup according to the first steps of the perfects etup guide, so I repaet the instructions to ensure that this step is not left out.
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
  #15  
Old 18th July 2013, 23:58
danhansen@denmark danhansen@denmark is offline
Senior Member
 
Join Date: Mar 2013
Posts: 247
Thanks: 53
Thanked 4 Times in 4 Posts
Thumbs up

Hi Till,


1. Thanks, thought so

2. OK, so it's not needed here, the same way it was in "Single Server Setup"
127.0.0.1 localhost.localdomain localhost
192.168.0.105 server1.example.tld server1
192.168.0.106 server2.example.tld etc...

3. OK, that's what I expected And this is why your tutorials are so great

4. VIP - NEW ISSUE !!!
Next Step in the Guide:
On Server 1: Creating private/public key pair on server1.example.tld --> Went OK!

Copy our public key to server2.example.tld --> PROBLEM!

root@server1:/home/administrator# ssh-copy-id -i $HOME/.ssh/id_dsa.pub root@192.168.0.102
The authenticity of host '192.168.0.102 (192.168.0.102)' can't be established.
ECDSA key fingerprint is 28:e7:85:a2:5d:e1:d4:66:c7:03:1a:30:b2.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.0.102' (ECDSA) to the list of known hosts.
root@192.168.0.102's password:
Permission denied, please try again.

I log in on both servers using "administrator" and then the password. Then I "sudo su" and my password again, and this works for both servers. Same username and password!
I don't quite get it, because when I log on to e.g. "server 1" the way I described, the prompt shows "administrator@server1" and after "sudo su" it shows "root@server1" - The password I just used to "sudo su" is this not the root password? What's the solution?

To create root password? (if this doesn't exist?) *
or
To change the command to: ssh-copy-id -i $HOME/.ssh/id_dsa.pub administrator@192.168.0.102 ???

* = "....and giving root a password. You can then directly log in as root, but this is frowned upon by the Ubuntu developers and community for various reasons. See http://ubuntuforums.org/showthread.php?t=765414.).."

The link doesn't work but I forund this post from "ubuntuforums.org" where the issue regarding "root" and own password is discussed: http://ubuntuforums.org/showthread.p...+root+password


What say you Mr. Brehm

.
__________________
Kind Regards
Dan

__________________________________________________ _______
Fixed IP/WAN
DMZ -> "ispserverip"
Primary NameServer -> ns1.myprimarynameserver.tld
Secondary NameServer -> ns2.somedomainservice.tld

Ubuntu Server 12.04.4
ISPconfig 3 v.3.0.5.2 (Single Server Setup)
NameServer: BIND v.9.8.1-P1
SquirrelMail: v.1.4.22
MailServer: PostFix v.2.9.6 - IMAP/POP3 Dovecot v.2.0.19
Database: MySQL Server v.5.5.29-0ubuntu0.12.04.2
Tutorial: "ThePerfectServer-ISPconfig3-Ubuntu12.04"

Last edited by danhansen@denmark; 19th July 2013 at 01:42. Reason: New Issue!!!
Reply With Quote
  #16  
Old 19th July 2013, 09:17
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lneburg, Germany
Posts: 36,395
Thanks: 833
Thanked 5,490 Times in 4,322 Posts
Default

Enable the ssh root user by running:

sudo passwd root

and then enter the password for the root user.

or you copy the key manually. Using your admin user will not work as it has no sufficient privileges to sync the files later.
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
  #17  
Old 23rd July 2013, 03:46
danhansen@denmark danhansen@denmark is offline
Senior Member
 
Join Date: Mar 2013
Posts: 247
Thanks: 53
Thanked 4 Times in 4 Posts
Thumbs up Enable ssh root....

Hi Till,

Thanks for your reply...

I will try that! But, is this what we are warned about? "... giving root a password.." or is it just temp. like when you use "sudo" in general?
If it's permanent, how do I change it back? If it's not permanent, please disregard my stupid question.. I find the root/sudo/password issue with the Ubuntu system a little tricky

"....and giving root a password. You can then directly log in as root, but this is frowned upon by the Ubuntu developers and community for various reasons. See http://ubuntuforums.org/showthread.php?t=765414.).."


Question:
1. At page 46 in the manual, isn't the example suppose to be regarding ip 192.168.0.105 & 192.168.0.106 ??? I'm just asking because this is the first time I'm doing the "Two Server Setup" I'll guess it's just a little error in the sample?!?

From the manual - page 46:
Next, we copy our public key to server2.example.tld:
ssh-copy-id -i $HOME/.ssh/id_dsa.pub root@192.168.0.106
root@server1:~# ssh-copy-id -i $HOME/.ssh/id_dsa.pub root@192.168.0.101
The authenticity of host '192.168.0.101 (192.168.0.101)' can't be established.
RSA key fingerprint is 25:d8:7a:ee:c2:4b:1d:92:a7:3d:16:26:95:56:62:4e.
Are you sure you want to continue connecting (yes/no)? <-- yes (you will see this
only if this is the first time you connect to server2)
Warning: Permanently added '192.168.0.101' (RSA) to the list of known hosts.
root@192.168.0.101's password: <-- server2 root password
Now try logging into the machine, with "ssh 'root@192.168.0.101'", and check in:
.ssh/authorized_keys
to make sure we haven't added extra keys that you weren't expecting.



2. In the "Two Server Setup"/"Mirror Setup" Guide, in the ISPconfig3 Manual page 46 we have now reached the place where we are going to instal the software, just like in the "The Perfect Server - ISPconfig3 - Ubuntu 12.04...etc. etc." Single Server Setup. And as we discussed further up this post, I will now install "postfix, dovecot and mysql" with one single command, but! There's a difference between the to tutorials/guides. I know you told me to use the commands from the Ubuntu tutorial, but this means to additional commands - so please confirm this is ok. I have highlighted the to extra commands in red to show the difference between the to tutorials/guides

apt-get install postfix postfix-mysql postfix-doc mysql-client mysql-server openssl getmail4 rkhunter binutils dovecot-imapd dovecot-pop3d dovecot-mysql dovecot-sieve sudo


Thanks for helping me here
__________________
Kind Regards
Dan

__________________________________________________ _______
Fixed IP/WAN
DMZ -> "ispserverip"
Primary NameServer -> ns1.myprimarynameserver.tld
Secondary NameServer -> ns2.somedomainservice.tld

Ubuntu Server 12.04.4
ISPconfig 3 v.3.0.5.2 (Single Server Setup)
NameServer: BIND v.9.8.1-P1
SquirrelMail: v.1.4.22
MailServer: PostFix v.2.9.6 - IMAP/POP3 Dovecot v.2.0.19
Database: MySQL Server v.5.5.29-0ubuntu0.12.04.2
Tutorial: "ThePerfectServer-ISPconfig3-Ubuntu12.04"

Last edited by danhansen@denmark; 23rd July 2013 at 04:45.
Reply With Quote
  #18  
Old 23rd July 2013, 08:49
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lneburg, Germany
Posts: 36,395
Thanks: 833
Thanked 5,490 Times in 4,322 Posts
Default

Quote:
I will try that! But, is this what we are warned about? "... giving root a password.." or is it just temp. like when you use "sudo" in general?
If it's permanent, how do I change it back? If it's not permanent, please disregard my stupid question.. I find the root/sudo/password issue with the Ubuntu system a little tricky
It is permanent. But this is ok as your system is protected by fail2ban so it can not be attacked with a brute force attack, just ensure that you use a long password with chars in upper / lower case, numbers and some special chars. Btw, the Ubuntu developers are the only ones which force to use sudo, the debian, centos and opensuse you can use the root account by default without having to enable it first. Most likely ubuntu does it because it is develped as a desktop Linux and not server and on desktops, user should not use root.

Quote:
1. At page 46 in the manual, isn't the example suppose to be regarding ip 192.168.0.105 & 192.168.0.106 ??? I'm just asking because this is the first time I'm doing the "Two Server Setup" I'll guess it's just a little error in the sample?!?
You have to use the IP addresses of your servers. The IP's in the guides are just examples.

Quote:
apt-get install postfix postfix-mysql postfix-doc mysql-client mysql-server openssl getmail4 rkhunter binutils dovecot-imapd dovecot-pop3d dovecot-mysql dovecot-sieve sudo
thats ok.
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
  #19  
Old 23rd July 2013, 13:01
danhansen@denmark danhansen@denmark is offline
Senior Member
 
Join Date: Mar 2013
Posts: 247
Thanks: 53
Thanked 4 Times in 4 Posts
Thumbs up

Hi Till,

Thanks for your quick reply,

1.:
It is permanent. But this is ok as your system is protected by fail2ban so it can not be attacked with a brute force attack, just ensure that you use a long password with chars in upper / lower case, numbers and some special chars. Btw, the Ubuntu developers are the only ones which force to use sudo, the debian, centos and opensuse you can use the root account by default without having to enable it first. Most likely ubuntu does it because it is develped as a desktop Linux and not server and on desktops, user should not use root.

Ok, I see.. Thanks for the detailed explanation.. But never the less, would you please show me how to disable the root password again, make it like it was before we "sudo passwd root". I would be greatfull I think I will keep the root password and to be used in similar situations, but I like to know how to do things, so if you would, please let me know how to...


2.: (this is not important, I think)
You have to use the IP addresses of your servers. The IP's in the guides are just examples.

Yes, I know that it's a sample... I use completely different IP'numbers in my LAN. What I ment was the IP-numbers in the example, weren't they suppose to be 192.168.1.105 and 192.168.1.106??? 192.168.1.101 suddely appears in the example as I highlighted in red...
If this is not a mistake, which server is 192.168.1.101 in the "Two Server Setup" on page 46, second para?


3.:
thats ok.

Great, and as we discussed earlier on, this is the way to do it all the way through the guide. To follow the guide and then to use the ubuntu software installation guidelines from the tutorial "The Perfect Server-ISPconfig3-Ubuntu12.04-etc.etc...."


4a.:
From the Guide, page 44
"...The following steps have to be executed on the master and on the slave server. If a specific step is only for the
master or slave, then I've added a note in the description in red..."


Which means that we are back to do this on both servers:

Install postfix, dovecot and mysql with one single command:
apt-get -y install postfix postfix-mysql postfix-doc mysql-client mysql-server openssl getmail4 rkhunter binutils dovecot-imapd dovecot-pop3d sudo

And this is the case whenever there's no note of "SERVER1" or "SERVER2", right?

4b.:
After running the command above, I got 2 not 3 questions to answer or fields to fill in:
General type of configuration? <-- Internet site THIS ONE!
Mail name? <-- server1.mydomain.tld THIS ONE
SSL certificate required <-- Ok BUT NOT THIS ONE!

4c.:
And how much of STEP 12 in the Tutorial "ThePerfectServer-ISPconfig3-Ubuntu12.04-etc..." do I follow? http://www.howtoforge.com/perfect-se...ispconfig-3-p4
Do I: "vi /etc/postfix/master.cf"
Do I: /etc/init.d/postfix restart
Do I: vi /etc/mysql/my.cnf
and follow all the steps here in the tutorial "ThePerfectServer-ISPconfig3-Ubuntu12.04-etc..." or do I jump right to the next step in the "Two Server Setup" Guide: vi /etc/mysql/my.cnf and go from there?
OK, I can see this will get more complicated than first expected. I'm having trouble finding the place where to go from the guide to the tutorial and vice versa..
If you tell me to follow the tutorial "ThePerfectServer-ISPconfig3-Ubuntu12.04-etc..." all the way down to: "/etc/init.d/mysql restart" then I think I still get it! Because it's the same issue, "....comment out the line bind-address = 127.0.0.1:.." and then my question "4b." is no longer an issue!


5.:
The "Two Server Setup" guide, page 48, first para:
Search for the section that starts with [mysqld], and put the following options into it (commenting out all existing
conflicting options):
[...]
[mysqld]
server-id = 1
replicate-same-server-id = 0
auto-increment-increment = 2
auto-increment-offset = 1
master-host = 192.168.0.106
master-user = slaveuser
master-password = slave_user_password
master-connect-retry = 60
expire_logs_days = 10
max_binlog_size = 500M
log_bin

I have no problem adding this under the section [mysqld] - but "commenting out the conflicting" this I just don't get!?!? I can't find one single line containing anything like the line's we are adding!?!? sorry...

Here's my new "/etc/mysql/my.cnf" on "server1"

Code:
[mysqld]
# ***** ADD'S TWO SERVER SETUP PAGE 48 *****
server-id = 1
replicate-same-server-id = 0
auto-increment-increment = 2
auto-increment-offset = 1
master-host = 192.168.0.106
master-user = slaveuser
master-password = slave_user_password
master-connect-retry = 60
expire_logs_days = 10
max_binlog_size = 500M
log_bin = /var/log/mysql/mysql-bin.log
# ***** END ADD'S TWO SERVER SETUP PAGE 48 *****
#
# * Basic Settings
#
user            = mysql
pid-file        = /var/run/mysqld/mysqld.pid
socket          = /var/run/mysqld/mysqld.sock
port            = 3306
basedir         = /usr
datadir         = /var/lib/mysql
tmpdir          = /tmp
lc-messages-dir = /usr/share/mysql
skip-external-locking
#
# Instead of skip-networking the default is now to listen only on
# localhost which is more compatible and is not less secure.
#bind-address           = 127.0.0.1
#
# * Fine Tuning
#
key_buffer              = 16M
max_allowed_packet      = 16M
thread_stack            = 192K
thread_cache_size       = 8
# This replaces the startup script and checks MyISAM tables if needed
# the first time they are touched
myisam-recover         = BACKUP
#max_connections        = 100
#table_cache            = 64
#thread_concurrency     = 10
#
# * Query Cache Configuration
#
query_cache_limit       = 1M
query_cache_size        = 16M
#
# * Logging and Replication
#
# Both location gets rotated by the cronjob.
# Be aware that this log type is a performance killer.
# As of 5.1 you can enable the log at runtime!
#general_log_file        = /var/log/mysql/mysql.log
#general_log             = 1
#
# Error log - should be very few entries.
#
log_error = /var/log/mysql/error.log
#
# Here you can see queries with especially long duration
#log_slow_queries       = /var/log/mysql/mysql-slow.log
#long_query_time = 2
#log-queries-not-using-indexes
#
# The following can be used as easy to replay backup logs or for replication.
# note: if you are setting up a replication slave, see README.Debian about
#       other settings you may need to change.
#server-id              = 1
#log_bin                        = /var/log/mysql/mysql-bin.log
expire_logs_days        = 10
max_binlog_size         = 100M
#binlog_do_db           = include_database_name
#binlog_ignore_db       = include_database_name
#
# * InnoDB
#
# InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/.
# Read the manual for more InnoDB related options. There are many!
#
# * Security Features
#
# Read the manual, too, if you want chroot!
# chroot = /var/lib/mysql/
#
# For generating SSL certificates I recommend the OpenSSL GUI "tinyca".
#
# ssl-ca=/etc/mysql/cacert.pem
# ssl-cert=/etc/mysql/server-cert.pem
# ssl-key=/etc/mysql/server-key.pem
5a.: Is it OK or where's the "conflicting options"?
5b.: "master-password = slave_user_password" Do I enter the password here, in this file??? I guess not!
5c.: "master-host = 192.168.0.106" This is the IPnumber for the other server, right?


6.:
Whenever an installation take this long as when I'm doing it - there will be new updates available!! What do I do? Do I update and upgrade those 4-6 packages or do I finish the setup and update later on???

I'm really sorry, Mr. Brehm, for all these newbie questions


NB! I have a question regarding the monthly payment/subscription... Maybe this is not the right place to ask this? If not, please advise me where to do so.
Is it possibel to move the date where the payment is done/from the 21 till the last day in the month? or the first in the month, it doesn't matter which one??? We have a apecial account where the payment amounts are transferred every month and this is every last day in the month. I get warnings from PayPAL every 21. in the month and message "HowtoForge Subscription" will be notified, and then I can't use this great service for several days. Is there anyway you could correct this? I would really appreciate this

.
__________________
Kind Regards
Dan

__________________________________________________ _______
Fixed IP/WAN
DMZ -> "ispserverip"
Primary NameServer -> ns1.myprimarynameserver.tld
Secondary NameServer -> ns2.somedomainservice.tld

Ubuntu Server 12.04.4
ISPconfig 3 v.3.0.5.2 (Single Server Setup)
NameServer: BIND v.9.8.1-P1
SquirrelMail: v.1.4.22
MailServer: PostFix v.2.9.6 - IMAP/POP3 Dovecot v.2.0.19
Database: MySQL Server v.5.5.29-0ubuntu0.12.04.2
Tutorial: "ThePerfectServer-ISPconfig3-Ubuntu12.04"

Last edited by danhansen@denmark; 23rd July 2013 at 15:42.
Reply With Quote
  #20  
Old 23rd July 2013, 16:54
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lneburg, Germany
Posts: 36,395
Thanks: 833
Thanked 5,490 Times in 4,322 Posts
 
Default

1) https://help.ubuntu.com/community/RootSudo
2) It might be a mistake in the example. Please use your IP addresses.
4a) Yes, install it on both servers.
4b) The queries might be different on your apt configuration and Linux distribution.
4c) you can follow the complete unbuntu tutorial and then add the additional steps for configurung mysql and unison.
5) This part of the guide might not work on ubuntu due to a newer mysql version, If I remember correctly I read that someone posted it here in the forums a few weeks ago, but I havent tested that. It might be nescessary that you search for a guide with instructions for mysql master/master replication for the mysql version that you have installed on your server if the instructions from debian guide dont work.
6) it is ok to install the updates later.

Quote:
Is it possibel to move the date where the payment is done/from the 21 till the last day in the month? or the first in the month, it doesn't matter which one??? We have a apecial account where the payment amounts are transferred every month and this is every last day in the month. I get warnings from PayPAL every 21. in the month and message "HowtoForge Subscription" will be notified, and then I can't use this great service for several days. Is there anyway you could correct this? I would really appreciate this
The subscription is done by paypal / rbs worldpay and start on the subscription day. We are not able to change that date as we do not handle the renewals. The only option that I see to change the date is that you cancel your current subscription and order a new one on the date were it shall start / renew.
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Sending email issue lezelf Installation/Configuration 15 9th August 2011 11:20
PHP warnings after upgrade to ISP config 3.03 stevegjacobs Installation/Configuration 5 30th October 2010 14:31
Debian 5 Ajax error + network interface always shutting down ev0css Installation/Configuration 3 5th June 2010 12:58
What can be wrong martin_rudowicz Installation/Configuration 9 11th May 2008 19:42
SP-Server Setup - Ubuntu 5.10 "Breezy Badger" - Page 6 (changes) LuisC-SM HOWTO-Related Questions 0 21st April 2006 15:16


All times are GMT +2. The time now is 23:04.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.