#1  
Old 26th June 2013, 11:19
ramons ramons is offline
Junior Member
 
Join Date: Jun 2013
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Default Apache config

Dear all, I have a Debian Apache VPS where I run 2 sites (OTRS and Owncloud) both use SSL.
Now I want to install ISP, but run into issues. Mainly related I guess to the apache conf files. I run the ispconfig install process through SSH but after that my apache webserver didn't start so I changed a few things so that at least my 2 sites are running again.

When I acces the ISPadmin panel url I get a 403 error in my browser.

This is the error is from the apache error log:
[Wed Jun 26 10:49:16 2013] [error] [client xxx.xxx.xxx.xxx] client denied by server configuration: /usr/local/ispconfig/interface/web/
[Wed Jun 26 10:49:16 2013] [debug] mod_deflate.c(615): [client xxx.xxx.xxx.xxx] Zlib: Compressed 202 to 161 : URL /


See the conf files below.

httpd.conf
==========
include /etc/apache2/ssl/httpd-ssl-new.conf

<FilesMatch \.php$>
SetHandler application/x-httpd-php
</FilesMatch>
==========


apache2.conf
==========
#
# Based upon the NCSA server configuration files originally by Rob McCool.
#
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See http://httpd.apache.org/docs/2.2/ for detailed information about
# the directives.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "foo.log"
# with ServerRoot set to "/etc/apache2" will be interpreted by the
# server as "/etc/apache2/foo.log".
#

### Section 1: Global Environment
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs/2.2/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
#ServerRoot "/etc/apache2"

#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
LockFile ${APACHE_LOCK_DIR}/accept.lock

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
# This needs to be set in /etc/apache2/envvars
#
PidFile ${APACHE_PID_FILE}

#
# Timeout: The number of seconds before receives and sends time out.
#
TimeOut 300

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive on

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15

##
## Server-Pool Size Regulation (MPM specific)
##

# prefork MPM
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes which are kept spare
# MaxSpareServers: maximum number of server processes which are kept spare
# MaxClients: maximum number of server processes allowed to start
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_prefork_module>
StartServers 5
MinSpareServers 5
MaxSpareServers 10
MaxClients 150
MaxRequestsPerChild 0
</IfModule>

# worker MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadLimit: ThreadsPerChild can be changed to this maximum value during a
# graceful restart. ThreadLimit can only be changed by stopping
# and starting Apache.
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_worker_module>
StartServers 2
MinSpareThreads 25
MaxSpareThreads 75
ThreadLimit 64
ThreadsPerChild 25
MaxClients 150
MaxRequestsPerChild 0
</IfModule>

# event MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_event_module>
StartServers 2
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadLimit 64
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule>

# These need to be set in /etc/apache2/envvars
User ${APACHE_RUN_USER}
Group ${APACHE_RUN_GROUP}

#
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
#

AccessFileName .htaccess

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<Files ~ "^\.ht">
Order allow,deny
Deny from all
Satisfy all
</Files>

#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain


#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off

# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog /var/log/apache2/error.log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel debug
#LogLevel debug

# Include module configuration:
Include mods-enabled/*.load
Include mods-enabled/*.conf

# Include all the user configurations:
Include httpd.conf

# Include ports listing
Include ports.conf

#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
# If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i
#
LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %O" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

# Include of directories ignores editors' and dpkg's backup files,
# see README.Debian for details.

# Include generic snippets of statements
Include conf.d/

# Include the virtual host configurations:
# Include sites-enabled/

include sites-available
==========



ports.conf
==========
# If you just change the port or add more ports here, you will likely also
# have to change the VirtualHost statement in
# /etc/apache2/sites-enabled/000-default
# This is also true if you have upgraded from before 2.2.9-3 (i.e. from
# Debian etch). See /usr/share/doc/apache2.2-common/NEWS.Debian.gz and
# README.Debian.gz

NameVirtualHost xx.xx.xx.xxx
NameVirtualHost *:80
Listen *:80
NameVirtualHost *:8080
Listen *:8080


<IfModule mod_ssl.c>
# If you add NameVirtualHost *:443 here, you will also have to change
# the VirtualHost statement in /etc/apache2/sites-available/default-ssl
# to <VirtualHost *:443>
# Server Name Indication for SSL named virtual hosts is currently not
# supported by MSIE on Windows XP.
# Listen 443
</IfModule>

<IfModule mod_gnutls.c>
Listen 443
</IfModule>
==========




conf.d / OTRS.conf
==========
# --
# added for OTRS (http://otrs.org/)
# $Id: apache2-httpd.include.conf,v 1.25 2011/11/05 17:39:09 mb Exp $
# --

# agent, admin and customer frontend
ScriptAlias /otrs/ "/opt/otrs/bin/cgi-bin/"
Alias /otrs-web/ "/opt/otrs/var/httpd/htdocs/"

# activate this if you are using an Oracle database
#SetEnv ORACLE_HOME /path/to/your/oracle/
#SetEnv ORACLE_SID YOUR_SID
#SetEnv NLS_LANG AMERICAN_AMERICA.UTF8
#SetEnv NLS_DATE_FORMAT 'YYYY-MM-DD HH24:MI:SS'

# if mod_perl is used
<IfModule mod_perl.c>

# load all otrs modules
Perlrequire /opt/otrs/scripts/apache2-perl-startup.pl

# Apache::Reload - Reload Perl Modules when Changed on Disk
PerlModule Apache2::Reload
PerlInitHandler Apache2::Reload
PerlModule Apache2::RequestRec

# set mod_perl2 options
<Location /otrs>
# ErrorDocument 403 /otrs/customer.pl
ErrorDocument 403 /otrs/index.pl
SetHandler perl-script
PerlResponseHandler ModPerl::Registry
Options +ExecCGI
PerlOptions +ParseHeaders
PerlOptions +SetupEnv
Order allow,deny
Allow from all
</Location>

# set mod_perl2 option for generic interface
<Location /otrs/nph-genericinterface.pl>
PerlOptions -ParseHeaders
</Location>

</IfModule>

# directory settings
<Directory "/opt/otrs/bin/cgi-bin/">
AllowOverride None
Options +ExecCGI -Includes
Order allow,deny
Allow from all
</Directory>
<Directory "/opt/otrs/var/httpd/htdocs/">
AllowOverride None
Order allow,deny
Allow from all
</Directory>

<IfModule mod_headers.c>
<Directory "/opt/otrs/var/httpd/htdocs/skins/*/*/css-cache">
<FilesMatch "\.(css|CSS)$">
Header set Cache-Control "max-age=2592000 must-revalidate"
</FilesMatch>
</Directory>

<Directory "/opt/otrs/var/httpd/htdocs/js/js-cache">
<FilesMatch "\.(js|JS)$">
Header set Cache-Control "max-age=2592000 must-revalidate"
</FilesMatch>
</Directory>
</IfModule>

# MaxRequestsPerChild (so no apache child will be to big!)
MaxRequestsPerChild 4000
==========



conf.d / Owncloud
==========
<IfModule mod_alias.c>
Alias /owncloud /var/www/owncloud/
</IfModule>
<Directory /var/www/owncloud/>
Options None
Order allow,deny
allow from all
AllowOverride All
AllowOverride All
</Directory>
==========




Sites-available/default
==========
<VirtualHost _default_:80>
DocumentRoot /var/www/owncloud
ServerName cloud.example.com
ServerAlias cloud.example.com
Redirect permanent / https://cloud.example.com/owncloud
</VirtualHost>

<VirtualHost *:80>
Servername otrs.example.com
ServerAlias www.otrs.example.com

Redirect permanent / https://otrs.example.com/
</VirtualHost>


################################################## ####
# This virtual host contains the configuration
# for the ISPConfig controlpanel
################################################## ####

NameVirtualHost *:8080

<VirtualHost _default_:8080>
ServerAdmin webmaster@localhost

<FilesMatch "\.ph(p3?|tml)$">
SetHandler None
</FilesMatch>

<IfModule mod_fcgid.c>
DocumentRoot /var/www/ispconfig/
SuexecUserGroup ispconfig ispconfig
<Directory /var/www/ispconfig/>
Options Indexes FollowSymLinks MultiViews +ExecCGI
AllowOverride AuthConfig Indexes Limit Options FileInfo
AddHandler fcgid-script .php
FCGIWrapper /var/www/php-fcgi-scripts/ispconfig/.php-fcgi-starter .php
Order allow,deny
Allow from all
</Directory>
IPCCommTimeout 7200
MaxRequestLen 15728640
</IfModule>

<IfModule mpm_itk_module>
DocumentRoot /usr/local/ispconfig/interface/web/
AssignUserId ispconfig ispconfig
AddType application/x-httpd-php .php
<Directory /usr/local/ispconfig/interface/web>
# php_admin_value open_basedir "/usr/local/ispconfig/interface:/usr/share:/tmp"
Options FollowSymLinks
AllowOverride None
Order allow,deny
Allow from all
php_value magic_quotes_gpc 0
</Directory>
</IfModule>

# ErrorLog /var/log/apache2/error.log
# CustomLog /var/log/apache2/access.log combined
ServerSignature Off
ServerName ispconfig.example.com
ServerAlias ispconfig.example.com
DocumentRoot /usr/local/ispconfig/interface/web
<IfModule mod_security2.c>
SecRuleEngine Off
</IfModule>

# SSL Configuration
#SSLEngine On
#SSLCertificateFile /usr/local/ispconfig/interface/ssl/ispserver.crt
#SSLCertificateKeyFile /usr/local/ispconfig/interface/ssl/ispserver.key
#SSLCACertificateFile /usr/local/ispconfig/interface/ssl/ispserver.bundle

</VirtualHost>

<Directory /var/www/php-cgi-scripts>
AllowOverride None
Order Deny,Allow
Deny from all
</Directory>

<Directory /var/www/php-fcgi-scripts>
AllowOverride None
Order Deny,Allow
Deny from all
</Directory>

==========


Sites-available/ispconfig.conf
==========
################################################
# ISPConfig Logfile configuration for vlogger
################################################

LogFormat "%v %h %l %u %t \"%r\" %>s %B \"%{Referer}i\" \"%{User-Agent}i\"" combined_ispconfig
CustomLog "| /usr/local/ispconfig/server/scripts/vlogger -s access.log -t \"%Y%m%d-access.log\" /var/log/ispconfig/httpd" combined_ispconfig

<Directory /var/www/clients>
AllowOverride None
Order Deny,Allow
Deny from all
</Directory>

# Do not allow access to the root file system of the server for security reasons
<Directory />
AllowOverride None
Order Deny,Allow
Deny from all
</Directory>

<Directory /var/www/conf>
AllowOverride None
Order Deny,Allow
Deny from all
</Directory>

# Except of the following directories that contain website scripts
<Directory /usr/share/phpmyadmin>
Order allow,deny
Allow from all
</Directory>

<Directory /usr/share/phpMyAdmin>
Order allow,deny
Allow from all
</Directory>

<Directory /usr/share/squirrelmail>
Order allow,deny
Allow from all
</Directory>

# allow path to awstats and alias for awstats icons
<Directory /usr/share/awstats>
Order allow,deny
Allow from all
</Directory>

Alias /awstats-icon "/usr/share/awstats/icon"

#NameVirtualHost *:80
#NameVirtualHost *:443

==========
Reply With Quote
Sponsored Links
  #2  
Old 26th June 2013, 15:05
ramons ramons is offline
Junior Member
 
Join Date: Jun 2013
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
 
Default

It is fixed, the actual issue was related to FCGI

in the SSH client I entered this :
apt-get install apache2 libapache2-mod-fcgid php5-cgi


And the issue was resolved

For more background info I used this:
http://www.howtoforge.com/forums/arc...p/t-60798.html
and
http://www.howtoforge.com/how-to-set...on-debian-etch
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Dovecot v2 with ISPConfig 3 CSsab Installation/Configuration 13 13th September 2012 19:01
apache config problem after upgrading to ISPCFG 3.0.4 Ovidiu Installation/Configuration 1 13th November 2011 17:26
Apache hangs without traffic Thesee General 21 27th September 2011 23:43
How to config Apache 2.x PHP 5.x with SuPHP longvnit HOWTO-Related Questions 11 26th May 2009 22:56
Requesting explanation of config files in /etc/apache2 (Debian Etch, Apache 2.2.3) rjamesd Server Operation 2 24th August 2007 13:16


All times are GMT +2. The time now is 21:04.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.