Go Back   HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials > Linux Forums > HOWTO-Related Questions

Do you like HowtoForge? Please consider supporting us by becoming a subscriber.
Reply
 
Thread Tools Display Modes
  #1  
Old 3rd May 2013, 14:55
darkmysterious darkmysterious is offline
Junior Member
 
Join Date: May 2013
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Unhappy smstools problem[cant send sms]

hi guyz,

i've installed smstplay and sms server tools using the below link

http://www.howtoforge.com/installati...-debian-server

everything is working fine during installation,but when i tried to send sms using my samsung galaxy s1 all messages remains in queue

any help please,i spent so much time trying to let that server send with no use

my configuration as the below

device conguration

Quote:
# configuration
devices = modem1
loglevel = 4
logfile = /var/log/sms/smstools.log
outgoing = /var/spool/sms/outgoing
checked = /var/spool/sms/checked
failed = /var/spool/sms/failed
incoming = /var/spool/sms/incoming
sent = /var/spool/sms/sent
delaytime = 6
errorsleeptime = 12
blocktime = 180
autosplit = 3
receive_before_send = yes
# Modem configuration # iTegno 3000 USB
[modem1]
#init =
incoming = yes
report_device_details = yes
report = yes
#pin = baudrate = 115200
init1 = AT+CNMI=1,0,0,2,0
#nit2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
device = /dev/ttyACM1

and my log file as below

Quote:
2013-05-03 15:49:35,2, smsd: Smsd v3.1.15 started.
2013-05-03 15:49:35,2, smsd: Running as root:root.
2013-05-03 15:49:35,4, smsd: File mode creation mask: 022 (0644, rw-r--r--).
2013-05-03 15:49:41,7, modem1: ## Start of device details
2013-05-03 15:49:41,7, modem1: # Manufacturer identification:
2013-05-03 15:49:41,7, modem1: -> AT+CGMI
2013-05-03 15:49:42,7, modem1: <- SAMSUNG
OK
2013-05-03 15:49:42,7, modem1: # Model identification:
2013-05-03 15:49:42,7, modem1: -> AT+CGMM
2013-05-03 15:49:42,7, modem1: <- AT+CGMMGT-I9003
OK
2013-05-03 15:49:42,7, modem1: # Revision identification:
2013-05-03 15:49:42,7, modem1: -> AT+CGMR
2013-05-03 15:49:43,7, modem1: <- I9003JXKP3
OK
2013-05-03 15:49:43,7, modem1: # New message indications, list of supported modes:
2013-05-03 15:49:43,7, modem1: -> AT+CNMI=?
2013-05-03 15:49:43,7, modem1: <- +CNMI: (0-2),(0-3),(0-3),(0-2),(0,1)
OK
2013-05-03 15:49:43,7, modem1: # New message indications, current settings:
2013-05-03 15:49:43,7, modem1: -> AT+CNMI?
2013-05-03 15:49:44,7, modem1: <- +CNMI: 1,0,0,2,0
OK
2013-05-03 15:49:44,7, modem1: # Preferred message storage, list of supported mem's:
2013-05-03 15:49:44,7, modem1: -> AT+CPMS=?
2013-05-03 15:49:44,7, modem1: <- +CPMS: ("BM","ME","SM","SR"),("ME","SM"),("BM","ME","SM", "SR")
OK
2013-05-03 15:49:44,7, modem1: # Phonebook storage, available mem's:
2013-05-03 15:49:44,7, modem1: -> AT+CPBS=?
2013-05-03 15:49:45,7, modem1: <- OK
2013-05-03 15:49:45,7, modem1: # List messages, list of supported stat's:
2013-05-03 15:49:45,7, modem1: -> AT+CMGL=?
2013-05-03 15:49:45,7, modem1: <- +CMGL: (0-4)
OK
2013-05-03 15:49:45,7, modem1: # Delete message, list of supported values:
2013-05-03 15:49:45,7, modem1: -> AT+CMGD=?
2013-05-03 15:49:46,7, modem1: <- +CMGD: ( ),( 0, 1, 2, 3, 4 )
OK
2013-05-03 15:49:46,7, modem1: # Phone activity status, list of supported stat's:
2013-05-03 15:49:46,7, modem1: -> AT+CPAS=?
2013-05-03 15:49:47,7, modem1: <- +CPAS: (0-5)
OK
2013-05-03 15:49:47,7, modem1: # TE character set, list of supported charset's:
2013-05-03 15:49:47,7, modem1: -> AT+CSCS=?
2013-05-03 15:49:47,7, modem1: <- +CSCS: ("UCS2", "IRA", "HEX", "GSM")
OK
2013-05-03 15:49:47,7, modem1: # TE character set, current setting:
2013-05-03 15:49:47,7, modem1: -> AT+CSCS?
2013-05-03 15:49:48,7, modem1: <- +CSCS: "IRA"
OK
2013-05-03 15:49:48,7, modem1: ## End of device details
and my dmesge like the below


Quote:
[ 1520.057028] usb 1-5: new high speed USB device using ehci_hcd and address 22
[ 1520.189406] usb 1-5: New USB device found, idVendor=04e8, idProduct=685e
[ 1520.189410] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1520.189412] usb 1-5: Product: SAMSUNG_Android
[ 1520.189414] usb 1-5: Manufacturer: SAMSUNG
[ 1520.189416] usb 1-5: SerialNumber: 6AE20002FFFC0000
[ 1520.189512] usb 1-5: configuration #1 chosen from 1 choice
[ 1520.190270] scsi14 : SCSI emulation for USB Mass Storage devices
[ 1520.190347] usb-storage: device found at 22
[ 1520.190348] usb-storage: waiting for device to settle before scanning
[ 1520.190561] cdc_acm 1-5:1.1: This device cannot do calls on its own. It is not a modem.
[ 1520.190626] cdc_acm 1-5:1.1: ttyACM0: USB ACM device
[ 1525.189219] usb-storage: device scan complete
[ 1525.190185] scsi 14:0:0:0: Direct-Access Texas In struments Inc.OM AP4 PQ: 0 ANSI: 2
[ 1525.190556] scsi 14:0:0:1: Direct-Access Texas In struments Inc.OM AP4 PQ: 0 ANSI: 2
[ 1525.190945] sd 14:0:0:0: Attached scsi generic sg2 type 0
[ 1525.191109] sd 14:0:0:1: Attached scsi generic sg3 type 0
[ 1525.194922] sd 14:0:0:0: [sdb] Attached SCSI removable disk
[ 1525.195538] sd 14:0:0:1: [sdc] Attached SCSI removable disk
[ 3828.710623] usb 1-5: USB disconnect, address 22
[ 5198.360041] usb 1-5: new high speed USB device using ehci_hcd and address 23
[ 5198.493008] usb 1-5: New USB device found, idVendor=04e8, idProduct=685e
[ 5198.493012] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5198.493015] usb 1-5: Product: SAMSUNG_Android
[ 5198.493017] usb 1-5: Manufacturer: SAMSUNG
[ 5198.493019] usb 1-5: SerialNumber: 6AE20002FFFC0000
[ 5198.493119] usb 1-5: configuration #1 chosen from 1 choice
[ 5198.493856] scsi15 : SCSI emulation for USB Mass Storage devices
[ 5198.493956] usb-storage: device found at 23
[ 5198.493958] usb-storage: waiting for device to settle before scanning
[ 5198.494159] cdc_acm 1-5:1.1: This device cannot do calls on its own. It is not a modem.
[ 5198.494221] cdc_acm 1-5:1.1: ttyACM1: USB ACM device
[ 5203.493554] usb-storage: device scan complete
[ 5203.494154] scsi 15:0:0:0: Direct-Access Texas In struments Inc.OM AP4 PQ: 0 ANSI: 2
[ 5203.494654] scsi 15:0:0:1: Direct-Access Texas In struments Inc.OM AP4 PQ: 0 ANSI: 2
[ 5203.495334] sd 15:0:0:0: Attached scsi generic sg2 type 0
[ 5203.495759] sd 15:0:0:1: Attached scsi generic sg3 type 0
[ 5203.500886] sd 15:0:0:0: [sdb] Attached SCSI removable disk
[ 5203.501523] sd 15:0:0:1: [sdc] Attached SCSI removable disk
note that when im tyring to send message there is no log that shows if there is any error or not
also note that i can send sms using "sendsms" command line

thank you

Last edited by darkmysterious; 4th May 2013 at 15:13.
Reply With Quote
Sponsored Links
  #2  
Old 17th May 2013, 01:11
darkmysterious darkmysterious is offline
Junior Member
 
Join Date: May 2013
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
 
Default

problem solved

thank you my god allah ^_^

i want to share how i solved my problem to help all people who are stuck like me for weeks in this kind of problems

please follow the below link

http://tech.groups.yahoo.com/group/p...l/message/2959

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Can't Send Mail from Smart Phone or Outlook Bushytea Server Operation 6 2nd January 2012 19:44
clamav and aspanaassin does not send notify emails to sender when virus found Emileve HOWTO-Related Questions 0 19th September 2009 10:20
Can't send mail from MSN to Hotmail XATAGuy Desktop Operation 1 10th December 2008 09:13
Errors Installing Postfix, PostfixAdmin, Courier asyadiqin Installation/Configuration 15 13th November 2008 17:28
can not send mail provell Installation/Configuration 7 27th April 2006 17:23


All times are GMT +2. The time now is 16:02.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.