/boot not ready after syncing RAID 1 w/ virgin drive

[primal23]

I am running Ubuntu 10.04, and used the How-to-setup RAID 1 on running system including GRUB2.

So I was planning on doing the upgrade to 12.04, and wanted to have a backup in case something goes haywire. So I took out one hard drive, put in a blank, and booted Ubuntu, and synced the raid, and installed GRUB.

Everything seemed fine, so I removed both drives and put in a blank as secondary, and the one I just synced into the primary, boot the system, and it takes me to the grub rescue menu.

So shutting down the system and putting back the original primary back in, the system boots, but the Ubuntu gives me a message,

/boot in not not ready or not installed

I skip that, get into Ubuntu, and md0 is not active. When I tried to update-grub, or os-prober I get this error:

ERROR: isw: wrong number of devices in RAID set "isw_dfichbebdi_Volume0:1" [1/2] on /dev/sda

Grub seems to have an older linux kernel it's "stuck" on, and I can't find a way to change it to the one currently used by Ubuntu.

Any help would be appreciated! Thanks!

[primal23]

When I try to update grub I get this:

root@******:~# update-grub
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-2.6.32-36-generic-pae
Found initrd image: /boot/initrd.img-2.6.32-36-generic-pae
Found linux image: /boot/vmlinuz-2.6.32-36-generic
Found initrd image: /boot/initrd.img-2.6.32-36-generic
ERROR: isw: wrong number of devices in RAID set "isw_dfichbebdi_Volume0:1" [1/2] on /dev/sda
done

And here is what Ubuntu runs for kernel:

root@******:~# uname -r
2.6.32-45-generic-pae

[primal23]

Got it solved, still get the error

ERROR: isw: wrong number of devices in RAID set "isw_dfichbebdi_Volume0:1" [1/2] on /dev/sda

But I can proceed with what I needed to get done, and work on that error when time allows, or if anyone has any ideas.

Thanks again!