cluster openfiler how-to help

[jeraisel]

Hello

I tried to follow the tutorial:
http://www.howtoforge.com/openfiler-...maker-and-drbd


The tutorial is great and I tried to follow step by step but I didn't get it to work.

running crm_mon I get the following output:

Attempting connection to the cluster...

============

Last updated: Tue May 15 10:18:32 2012

Stack: openais

Current DC: cluster1 - partition with quorum

Version: 1.1.2-c6b59218ee949eebff30e837ff6f3824ed0ab86b

2 Nodes configured, 2 expected votes

4 Resources configured.

============

Online: [ cluster2 cluster1 ]

 Resource Group: g_services

	lvmdata		(ocf::heartbeat:LVM):   	Started cluster2

	openfiler	(lsb:openfiler):		Stopped

	ClusterIP	(ocf::heartbeat:IPaddr2):	Stopped

	iscsi		(lsb:iscsi-target):     	Stopped

	samba		(lsb:smb):			Stopped

	nfs		(lsb:nfs):			Stopped

	nfslock		(lsb:nfslock):  		Stopped



 Master/Slave Set: ms_g_drbd

	Masters: [ cluster2 ]

	Slaves: [ cluster1 ]



Failed actions:

    nfs-lock_start_0 (node=cluster1, call=16, rc=1, status=complete): unknown e

I misspelled the corosync command:

order o_g_servicesafter_g_drbd inf: ms_g_drbd:promote g_services:start

I've read in one of the comments that it was supposed to be:

order o_g_services_after_g_drbd inf: ms_g_drbd:promote g_services:start

how do I correct it?

here is the output of the crm configure show command:

 node cluster1

node cluster2

primitive ClusterIP ocf:heartbeat:IPaddr2 \
	params ip="128.1.8.101" cidr_netmask="32" \
	op monitor interval="30s"

primitive MetaFS ocf:heartbeat:Filesystem \
	params device="/dev/drbd0" directory="/meta" fstype="ext3"

primitive drbd_data ocf:linbit:drbd \
	params drbd_resource="data" \
	op monitor interval="15s"

primitive drbd_meta ocf:linbit:drbd \
	params drbd_resource="meta" \
	op monitor interval="15s"

primitive iscsi lsb:iscsi-target

primitive lvmdata ocf:heartbeat:LVM \
	params volgrpname="data"

primitive nfs lsb:nfs

primitive nfs-lock lsb:nfslock

primitive nfslock lsb:nfslock

primitive openfiler lsb:openfiler

primitive samba lsb:smb

group g_drbd drbd_meta drbd_data

group g_services lvmdata openfiler ClusterIP iscsi samba nfs nfslock

ms ms_g_drbd g_drbd \
	meta master-max="1" master-node-max="1" clone-max="2" clone-node-max="1" notify="true"

colocation c_g_services_on_g_drbd inf: g_services ms_g_drbd:Master

order o_g_servicesafter_g_drbd inf: ms_g_drbd:promote g_services:start

property $id="cib-bootstrap-options" \
	dc-version="1.1.2-c6b59218ee949eebff30e837ff6f3824ed0ab86b" \
	cluster-infrastructure="openais" \
	expected-quorum-votes="2" \
	stonith-enabled="false" \
	no-quorum-policy="ignore"

rsc_defaults $id="rsc-options" \
	resource-stickiness="100"

also notice that the first two lines of the crm configure show are different from the expected output, I get:

node cluster1

node cluster2

instead of:
 node filer01 \

attributes standby="off"

node filer02 \
attributes standby="off"

Also I can't access the openfiler web interface.

Thank you in advance

Jera

[antram]

No puedes acceder a la interface de openfiler porque el recurso ClusterIP esta parado.
El problema esta en el recurso nfslock que no funciona.
Creo que como ambos recursos esta agrupados en g_services si uno no arranca tampo lo hace el otro.

o_g_services_after_g_drbd = o_g_servicesafter_g_drbd.
Esto solo es el nombre del recurso y puedes poner lo que tu quieras.

A mi tampoco me funciona el recurso nfslock, si consigues arreglarlo avisame.

Saludos y disculpa por no contestarte en inglés.

[jeraisel]

Hi

Thank you for your reply, and I do understand Spanish, no problem.
I will investigate what you said, and if I get anywhere I'll post it on the forum.

Thanks again

jeraisel