clamd, ispconfig, debian 6

[fxs]

Hi,
The last update of ispconfig solve most of my problems.... Thanks
I remind you: Server: i7 ssd ovh debian 6 Ispconfig 3.04.2
Got this error messages:

socket /var/run/clamav/clamd.ctl: Aucun fichier ou dossier de ce type) at (eval 105) line 373.\n
Jan 17 20:44:29 xxxxxxx amavis[16379]: (16379-17) (!!)WARN: all primary virus scanners failed, considering backups
Jan 17 20:48:31 xxxxxxxxxx amavis[16378]: (16378-19) (!)ClamAV-clamd: Can't connect to UNIX socket /var/run/clamav/clamd.ctl: Aucun fichier ou dossier de ce type, retrying (2)
Jan 17 20:48:37 xxxxxxx amavis[16378]: (16378-19) (!)ClamAV-clamd av-scanner FAILED: run_av error: Too many retries to talk to /var/run/clamav/clamd.ctl (Can't connect to UNIX

Perhaps it’s the same problem described in the following thread: http://www.howtoforge.com/forums/sho...t=44828&page=2
Then I try

root@xxxxxx:~# service clamd status

And get

clamd: unrecognized service

Then I try

........
root@xxxxx:~# apt-get -u upgrade
root@xxxxxxx:~# apt-get install clamav-daemon

And get (in French!)

Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Certains paquets ne peuvent être installés. Ceci peut signifier
que vous avez demandé l'impossible, ou bien, si vous utilisez
la distribution unstable, que certains paquets n'ont pas encore
été créés ou ne sont pas sortis d'Incoming.
L'information suivante devrait vous aider à résoudre la situation :
Les paquets suivants contiennent des dépendances non satisfaites :
clamav : Dépend: libclamav6 (>= 0.97.3+dfsg) mais 0.97.2+dfsg-1~squeeze1 devra être installé
E: Paquets défectueux

This is a mixed of french and english I do not understand. Maybe it could say I want also 0.97.2+dfsg-1~squeeze1 but it's not there? But how to get precisely this package, what is the command?
Why I cannot install clamd?
What is your opinion regarding the error message?
Thank you for your input.
best regards

[falko]

What's in /etc/apt/sources.list?

[fxs]

Hi,

This is:

deb http://mirror.ovh.net/debian/ squeeze main
deb-src http://mirror.ovh.net/debian/ squeeze main
deb http://security.debian.org/ squeeze/updates main
deb-src http://security.debian.org/ squeeze/updates main
deb http://volatile.debian.org/debian-volatile lenny/volatile main contrib non-$
deb http://volatile.debian.org/debian-volatile lenny/volatile main contrib non-$

[falko]

Please comment out both
http://volatile.debian.org
lines at the end, run

apt-get update

and try again.

[fxs]

Hello,

Thank you for your answer.
Now it works!


However, I have a second question.
You have done a great tuto
http://www.howtoforge.com/server_monitoring_monit_munin about munin and I have a problem (I’m dealing with debian 6 / ispcponfig 3.042).
I did exactly what you wrote in this tuto. However, when the folder “monitoring” is inside a web site (handled by Ispconfig), munin cannot transfer the various files. When the folder "monitoring” is outside, it’s ok.

[ERROR] Could not copy style.css from /etc/munin/templates to /var/www/exemple.com/web/monitoring/

I did chown rf munin:munin …., chmod 755 monitoring, etc.. but failed to solve this problem
Inside the folder web, ls -l gives

-rw-r--r-- 1 web2  client1 3062 15 déc.  02:01 courrier.htm
drwxr-xr-x 2 web2  client1 4096 15 déc.  02:06 demo_img
drwxr-xr-x 2 web2  client1 4096 14 déc.  15:59 error
-rw-r--r-- 1 web2  client1 1861 22 janv. 13:55 index-bis.html
-rwxr-xr-- 1 web2  client1 7007 15 déc.  02:04 index.html
drwxr-xr-x 2 munin munin   4096 22 janv. 20:18 monitoring
drwxr-xr-x 3 web2  client1 4096 15 déc.  02:05 p7epm
drwxr-xr-x 3 web2  client1 4096 15 déc.  02:05 p7iq
drwxr-xr-x 3 web2  client1 4096 15 déc.  02:01 p7iqm
drwxr-xr-x 2 root  root    4096  2 janv. 00:30 stats

notice: /var/www/exemple.com/web/monitoring
I am unable to find the solution about these permissions. Any input will be appreciated.

On the same subject, I would like the munin's graph not to be public. The solution of the tuto doesn't work for me. I copy the .htaccess from the folder stats (webalizer) to the folder monitoring. He works only one time and after that when we come back it is forbidden. I tried also the folder protection from ispconfig
What is the best solution to reach the goal?

thanks
best regards

[falko]

Use the default output directory /var/cache/munin/www and then create an alias in your Apache configuration.

http://httpd.apache.org/docs/2.0/mod...ias.html#alias

[fxs]

Hello

thanks for the prompt answer and your great help.

I give a feedback.

I follow your method and links. Then it gives me various error messages. One of these give me a clue: "Alias munin already created". So that I search..
In the folder munin, there ise a file apache.conf with the code

Alias /munin /var/cache/munin/www
<Directory /var/cache/munin/www>
        Order allow,deny
        Allow from localhost 127.0.0.0/8 ::1
        Options None

        # This file can be used as a .htaccess file, or a part of your apache
        # config file.
        #
        # For the .htaccess file option to work the munin www directory
        # (/var/cache/munin/www) must have "AllowOverride all" or something
        # close to that set.
        #

        # AuthUserFile /etc/munin/munin-htpasswd
        # AuthName "Munin"
        # AuthType Basic
        # require valid-user
        # This next part requires mod_expires to be enabled.
        #

        # Set the default expiration time for files to 5 minutes 10 seconds from
        # their creation (modification) time.  There are probably new files by
        # that time.
        #

    <IfModule mod_expires.c>
        ExpiresActive On
        ExpiresDefault M310
    </IfModule>

</Directory>

hope that helps other people

best regards