Go Back   HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials > ISPConfig 3 > General

Do you like HowtoForge? Please consider supporting us by becoming a subscriber.
Reply
 
Thread Tools Display Modes
  #1  
Old 17th January 2012, 19:49
jairzhino jairzhino is offline
Junior Member
 
Join Date: Jul 2006
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
Exclamation ISPConfig 3 installed now what?

I successfully complete the tutorial: The Perfect Server - Debian Squeeze (Debian 6.0) With BIND & Dovecot [ISPConfig 3]

I can log in to the system and upgraded yesterday to the version ISPConfig 3.0.4.2 and all is good.

I am very new to this product and I would like to understand a few things:

1. email postfix, dovecot SMTP, IMAP, POP3 is already setup by default? How do I test the functionality? Webmail is installed squirrel mail, how can I test it?

2. DNS was installed do I provide resolution to the clients e.g. www.ikick.com will be automatically created with @ikick.com email and dns resolution virtual host? do I need to create an MX record and Zone?

3. Is there a IRC channel for ISPConfig 3 that covers this common questions?

4. If I provide a tutorial and get published in howtoforge.com can I get a free copy if the ISPConfig 3 manual?

Thank you!
Reply With Quote
Sponsored Links
  #2  
Old 17th January 2012, 20:31
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 35,504
Thanks: 813
Thanked 5,265 Times in 4,129 Posts
Default

1) Create a email domain, then create a mailbox and then login to webmail with the created email address and password and send a email to the same address. It should arrive within a minute in the same webmail account if the mailsystem is working correctly.

2) You can use the dns wizard to create complete sets of dns records. They dont get created when you add a email domain or website.

3) No.

4) Yes.
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
  #3  
Old 18th January 2012, 01:26
jairzhino jairzhino is offline
Junior Member
 
Join Date: Jul 2006
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
Default First test success

Till,

I did this ---> 1) Create a email domain, then create a mailbox and then login to webmail with the created email address and password and send a email to the same address. It should arrive within a minute in the same webmail account if the mailsystem is working correctly.

And it works just as you described, I added an screenshot (screenshot1) as well.

Now here I am a little confuse---> 2) You can use the dns wizard to create complete sets of dns records. They dont get created when you add a email domain or website.

Do I need to have an static IP per domain or client I will be hosting on the ISPConfig 3 server?

I used the dns wizard and configured the following (screenshot2).

I test sending an email to a gmail account and I got it, but replying from the gmail account to the client email = jsolis@lospctecs.com I get Delivery Status Notification (Failure) --> (screenshot3)

I am sure that there is something I am missing on the configuration of th dns, ns records, mx server and what static IP should I use if I only have one external static IP the one used by the ISPConfig 3 host server.

Thank you in advance for your help,
Attached Images
   
Reply With Quote
  #4  
Old 18th January 2012, 04:06
rafael-ec rafael-ec is offline
Member
 
Join Date: Jul 2007
Posts: 57
Thanks: 15
Thanked 6 Times in 4 Posts
Default

Quote:
Now here I am a little confuse---> 2) You can use the dns wizard to create complete sets of dns records. They dont get created when you add a email domain or website.
You don't necessary manage the DNS on the same server. However it could be a good idea to create the domain zone.

Quote:
Do I need to have an static IP per domain or client I will be hosting on the ISPConfig 3 server?
No, most of the cases with 1 static public ip you would be fine.

Quote:
I used the dns wizard and configured the following (screenshot2).

I test sending an email to a gmail account and I got it, but replying from the gmail account to the client email = jsolis@lospctecs.com I get Delivery Status Notification (Failure) --> (screenshot3)
Where did you buy the domain? Did you configure the DNS in your domain registrant so that they point to your DNS server?

Regards,

Rafael
Reply With Quote
  #5  
Old 18th January 2012, 04:28
jairzhino jairzhino is offline
Junior Member
 
Join Date: Jul 2006
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
Exclamation

Hello there Rafael,

I got the domain name from godady

I am pretty sure is something I need to do with the name servers there and the external IP of the ISPConfig3 server e.g. 173.15.38.123 which is also pointing to the domain name "plumswap.com"

So everytime I add a new client, domain, site, example.com I need to make the ISP e.g. godaddy to point the name servers to the same 173.15.38.123 external ip and the ISPConfig3 server will do the virtual hosting to the address example.com, lospctecs.com, plumswap.com etc...

Thank you so much!
Reply With Quote
  #6  
Old 18th January 2012, 04:43
rafael-ec rafael-ec is offline
Member
 
Join Date: Jul 2007
Posts: 57
Thanks: 15
Thanked 6 Times in 4 Posts
Default

Yes or to another provider. In the past I used everydns.net, they where free at the time. Today I use the DNS of my hosting provider (www.linode.com) because they have 4 servers that manage the domain names and is less work for me.

So you could manage the DNS in your own server or in other place. You could not even own the domain, but a client of your that could manage the domain himself and you should ask him to configure the dns to point your server.

You should read a bit more about how DNS work. Not in the English Wikipedia tomarrow as it would be down thanks to #sopa

Regards,

Rafael
Reply With Quote
  #7  
Old 18th January 2012, 23:53
jairzhino jairzhino is offline
Junior Member
 
Join Date: Jul 2006
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
Exclamation

Till and Rafael,

Here are some updates:

The server ISPConfig3 is up and running, I have one customer set up with website and also email. When I go to the domain name of the client "www.lospctecs.com" I get the default index page from ISPConfig3 successfully.

Question1: If I have a site do I upload the site manually using rsync or ftp CLI? or there is a GUI tool on ISPConfig3 for administrators to do it?

Question2: I can send emails but still can't receive them at this point I don't get any more messages about "Delivery Status Notification (Failure)" I just don't get any messages back but I don't receive the messages in the "user@lospctecs.com" account on the web mail squirrel main => www.lospctecs.com/webmail

Question3: If I am using the domain provider godaddy, is this correct in the configuration of the DNS, MX and other CNAMEs?
(screenshot1)

Question4: If I use dig lospctecs.com
Is this what I suppose to received back? I believe something is missing or misconfiguration... please help
(screenshot2)

Here I am showing the name servers of the godaddy account for lospctecs.com domain.
(screenshot3)

Question5: Can I use the IP static of the ISPConfig3 server as the IP to the MAIL server (postfix), FTP, DNS --> NS1 server or do I need to use the NS65.domaincontrol.com and NS66.domaincontrol.com as the godaddy is the domain name provider?
(screenshot4)

I am sure I am very close to understand what the issue is! I am really trying to read how DNS and MX records works and how they need to be configure when working with ISP providers and clients! Thank you!!!
Attached Images
    
Reply With Quote
  #8  
Old 19th January 2012, 02:34
rafael-ec rafael-ec is offline
Member
 
Join Date: Jul 2007
Posts: 57
Thanks: 15
Thanked 6 Times in 4 Posts
 
Default

1) You can use rsync, ssh, ftp cli or ftp with GUI like filezilla. As far as I know there is now way to upload the files from the web interface. I think it was possible with ISPconfig 2.
2) Not sure
3) Just what you have on that screenshot. Now I am sure you run that command in your ISPconfig server and I think it uses itself to resolve. So that is why you have the correct answer. This is what I get from one of my Linux boxes:
Code:
nslookup mx lospctecs.com
Server:		lospctecs.com
Address:	173.15.38.123#53

** server can't find mx: REFUSED
Goddady should be pointint to your server. If it point to Goddady dns servers you should configure them there. I think there is where you are wrong.

6) Yes you can use the same IP for several domains. Each IP can use TCP or UDP protocol. Each of those protocols have several thousands of ports and each port can be use for a service. Ports under 1024 are the known ports and where the main protocls of the Internet are used.

Hope I help you a bit more. If you think my answers are helpful, don't forget to click on thanks

Regards,

rafael
Reply With Quote
Reply

Bookmarks

Tags
debian 6, dns ns one ispconfig3, ispconfig 3, ispconfig 3 how-to

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Squirrelmail login failure Cracklefish Installation/Configuration 9 30th June 2010 20:38
downgrade to php 5.2.11 from 5.3 on fedora 12 GioMBG Installation/Configuration 1 13th December 2009 06:58
ISPConfig installation into multiple OpenVZ containers letezo Installation/Configuration 11 3rd March 2009 22:47
ISPConfig 2.3.2-dev released till General 9 4th June 2007 10:46
SP-Server Setup - Ubuntu 5.10 "Breezy Badger" - Page 6 (changes) LuisC-SM HOWTO-Related Questions 0 21st April 2006 15:16


All times are GMT +2. The time now is 06:25.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.