I'm slogging through the tutorial - http://www.howtoforge.com/perfect-se...ot-ispconfig-3
on a the most current ubuntu 12.04 LTS (PV). I have worked through most of the gotchas and thought I would document some of them -
In the aws console you need to open the following ports.
Custom TCP Rule TCP 21 0.0.0.0/0
SMTP TCP 25 0.0.0.0/0
HTTP TCP 80 0.0.0.0/0
POP3 TCP 110 0.0.0.0/0
IMAP TCP 143 0.0.0.0/0
HTTPS TCP 443 0.0.0.0/0
SMTPS TCP 465 0.0.0.0/0
Custom TCP Rule TCP 587 0.0.0.0/0
MYSQL TCP 3306 0.0.0.0/0
Custom TCP Rule TCP 50000 - 50400 0.0.0.0/0 <- this was to get FTPES to work
SSH TCP 22 xx.xx.xx.xx/32 <- use my ip
Custom TCP Rule TCP 8080 xx.xx.xx.xx/32 <- use my ip
Step 7 - On editing /etc/hosts. Make sure you have an elastic ip address and that address is resolving correctly.
Step 16 - On enabling quota (http://www.howtoforge.com/perfect-se...#comment-33275
sudo apt-get install linux-image-extra-virtual
sudo modprobe quota_v1
sudo modprobe quota_v2
After ispconfig3 is install -
sudo vi /etc/pure-ftpd/conf/PassivePortRange
Still trying to get smtp to work with a login from my apple mail client and will post when successful.
Update - OK the mail client works fine. I did not use my complete username - email@example.com