The Perfect Server - CentOS 6.0

[2dp]

Hi falko!

I was following instructions in your guide "The Perfect Server - CentOS 6.0 x86_64 [ISPConfig 3]" (excellent guide, by the way) but on 32 bit system.
On the step 7, with line "rpm --import https://fedoraproject.org/static/0608B895.txt", i got this message:
"curl: (60) Peer certificate cannot be authenticeted with known CA certificates ...... error: https://fedoraproject.org/static/0608B895.txt: import read failed(2)"
I'm new in linux world, so any help would be very appreciated.

Thank you!

[falko]

Does

wget https://fedoraproject.org/static/0608B895.txt
rpm --import 0608B895.txt

work?

If not, what other repositories did you enable before?

[2dp]

While i was waiting for your answer, i tried also your guide "The Perfect Server - Debian Squeeze (Debian 6.0) With BIND & Dovecot [ISPConfig 3] ". Again a lot of problems. Then i found the cause - bad HDD. Changed it - Debian installed with no problem .
Have another question dough:
i'm trying to set up slave DNS. I'm using "How To Run Your Own DNS Servers (Primary And Secondary) With ISPConfig 3 (Debian Squeeze)".
Should i follow instructions in the first guide also for slave up until ISPConfig3 installation and continue from second guide from "3 Setting Up server2.example.com (Secondary DNS)"?
What about forwarding?
Both, master and slave, would be on the same subnet. For master, i forwarded port 53 on my router to the master. Should i do the same for slave?
Last question: at the end there will be master dns with mail, mysql, ftp,... and slave that is a mirror of a master (but just DNS). What about mirroring other services (web pages, mail...)?

Thanks again!

[falko]

Originally Posted by 2dp

Should i follow instructions in the first guide also for slave up until ISPConfig3 installation and continue from second guide from "3 Setting Up server2.example.com (Secondary DNS)"?

If you just want to use this as a DNS slave, then yll you need is described in chapter 3 on http://www.howtoforge.com/how-to-run...ian-squeeze-p2 . If you want to run other services on that host as well, then follow the Perfect Server.

Originally Posted by 2dp

Both, master and slave, would be on the same subnet. For master, i forwarded port 53 on my router to the master. Should i do the same for slave?

You can forward one port only to one backend server, so it's not possible to forward port 53 to your slave if it is already forwarded to the master.

Originally Posted by 2dp

What about mirroring other services (web pages, mail...)?

Thanks again!

That's no problem - take a look at http://www.howtoforge.com/installing...th-ispconfig-3 .