ispconfig3 on centos 5.4 i386

[emetib]

Great tutorial!

All is working well so far.

So I am now here in the tutorial
http://www.howtoforge.com/perfect-se...ispconfig-3-p6

I am at the point of installing the latest ispconfig3 via ...
wget http://downloads.sourceforge.net/isp...gz?use_mirror=

While reading through the config information I realize I need a few answers to complete this install.

I have never done this before.
I am not clear what I should enter for ...

Full qualified hostname (FQDN) of the server, eg server1.domain.tld [server1.example.com]: <-- ENTER

AND

Organizational Unit Name (eg, section) []: <-- ENTER
Common Name (eg, your name or your server's hostname) []: <-- ENTER
Email Address []: <-- ENTER



My /etc/hosts info is ...

[root@centos1 tmp]# cat /etc/hosts


# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 centos1.shaley.travishaley.com centos1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6


Which allows me to browse using this address
http://10.0.2.121/phpmyadmin/
http://10.0.2.121/webmail/


Thank You in advance.

[till]

You should not enter anything, please press just the enter key on your keyboard.

[emetib]

Thanks Till

That sounds easy enough.

very great


I can now access ISPConfig 3 with
http://10.0.2.121:8080/
I can't access it with
http://centos1.shaley.travishaley.com:8080/

I did change the following to my area on the install
Country Name (2 letter code) [GB]: <-- ENTER
State or Province Name (full name) [Berkshire]: <-- ENTER
Locality Name (eg, city) [Newbury]: <-- ENTER


Also

I am not able to access
http://10.0.2.121/webmail/src/login.php
using
Name: root
Password: <password>

Is there possibly another tutorial(s) available once I complete the ISPconfig 3 instructions?

One that will assist me with accessing Squirrelmail and setting up an ISPconfig 3 control panel?

[falko]

Originally Posted by emetib

I can't access it with
http://centos1.shaley.travishaley.com:8080/

Does centos1.shaley.travishaley.com point to your router'S public IP address? Did you configure your router to forward port 8080 to your ISPConfig server?

Originally Posted by emetib

Also

I am not able to access
http://10.0.2.121/webmail/src/login.php
using
Name: root
Password: <password>

You must log in with an email address (that you set up through ISPConfig) and the appropriate password.

[emetib]

Thanks falko!

Does centos1.shaley.travishaley.com point to your router'S public IP address? Did you configure your router to forward port 8080 to your ISPConfig server?

Nope
having router set up now
THANK YOU!

You must log in with an email address (that you set up through ISPConfig) and the appropriate password.

OK
ISPconfig panel --> email --> Add New Domain --->
server = centos1.shaley.travishaley.com?
AND
domain = any domain on centos1.shaley.travishaley.com that needs email?
eg: domain = nhrabook.com and/or www.nhrabook.com? ( is the www needed??)
eg: domain alias = ads.nhrabook.com

IS there a good tutorial regarding the setup of ISPconfig 3 email
and/or ISPconfig 3 control panel?

[falko]

Originally Posted by emetib

OK
ISPconfig panel --> email --> Add New Domain --->
server = centos1.shaley.travishaley.com?

Yes.

Originally Posted by emetib

AND
domain = any domain on centos1.shaley.travishaley.com that needs email?

Yes.

Originally Posted by emetib

eg: domain = nhrabook.com and/or www.nhrabook.com? ( is the www needed??)

The www is not needed (unless you want to receive emails in the form of user@www.yourdomain.com).

Originally Posted by emetib

IS there a good tutorial regarding the setup of ISPconfig 3 email
and/or ISPconfig 3 control panel?

Yes, there's the ISPConfig 3 Manual: http://www.ispconfig.org/ispconfig-3...nfig-3-manual/

[emetib]

Thanks again falko

I'd love your assistance again regarding pointing my router to Public IP address and forwarding port 8080.

Does centos1.shaley.travishaley.com point to your router'S public IP address? Did you configure your router to forward port 8080 to your ISPConfig server?

I have only one public IP address available to me which my router is currently pointing to.


Currently I am using it to host files on a Win 2008 server Xampp
10.0.2.220

Godaddy hosts account.

I then created Centos5.4 Perfect Server through remote desktop via AnzioWin-10.0.2.121

Now I don't want to take 10.0.2.220 off line since it is hosting web sites.
I believe that will occur IF point 10.0.2.121 - centos1.shaley.travishaley.com to my public IP address.

Can this be resolved by using different ports possibly
port 80 for 10.0.2.220
port 81 for 10.0.2.121

port 8080 for 10.0.2.220
port 8181 for 10.0.2.121

Or something else so I can use both Win 2008 and this new Centos5 server?


[shaley@centos1 ssh]$ netstat -r
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
10.0.2.0 * 255.255.255.0 U 0 0 0 eth0
169.254.0.0 * 255.255.0.0 U 0 0 0 eth0
default 10.0.2.1 0.0.0.0 UG 0 0 0 eth0

[falko]

10.0.2.220 is a private IP address (the router's internal one), not a public one.

Go to your router's status page, and it should show you the public IP.

[emetib]

It is not my router yet thanks for your reply!
I'll pass your message on.

Thanks again for all your assistance