Go Back   HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials > ISPConfig 3 > Installation/Configuration

Do you like HowtoForge? Please consider supporting us by becoming a subscriber.
Reply
 
Thread Tools Display Modes
  #1  
Old 12th February 2011, 13:02
Ian Wilson Ian Wilson is offline
Junior Member
 
Join Date: Feb 2011
Posts: 19
Thanks: 0
Thanked 0 Times in 0 Posts
Exclamation Getting Email Working ISPConfig3 Squirrelmail and Courier etc

I have installed ISPConfig following the perfect server set up for Ubuntu 10.04 The Perfect Server – Ubuntu 10.04 [ISPConfig 3]
I have managed to get most things working apart from the email
As far as I can determine I have two separate but possibly interconnected problems.

Problem 1
I cannot login into Squirrelmail with a email address and password of a valid email account.
I get the Unknown user or password incorrect error message

Problem 2
When I try sending an email to a valid email account I get the following bounced email message

Code:
This is the mail system at host wsrv1.smallbizwebhosts.co.uk.

I'm sorry to have to inform you that your message could not
be delivered to one or more recipients. It's attached below.

For further assistance, please send mail to postmaster.

If you do so, please include this problem report. You can
delete your own text from the attached returned message.

                  The mail system

<webmaster@specialist-roofing-contractor.co.uk>: user unknown. Command output:
   ERR: authdaemon: s_connect() failed: Permission denied Invalid user
   specified.

Final-Recipient: rfc822; webmaster@specialist-roofing-contractor.co.uk
Original-Recipient: rfc822;webmaster@specialist-roofing-contractor.co.uk
Action: failed
Status: 5.1.1
Diagnostic-Code: x-unix; ERR: authdaemon: s_connect() failed: Permission denied
   Invalid user specified.
My Email log file shows

Code:
Feb 12 11:10:45 wsrv1 postfix/qmgr[13911]: 048D81D801: from=, size=1475, nrcpt=1 (queue active)
Feb 12 11:10:46 wsrv1 postfix/smtpd[14786]: connect from localhost.localdomain[127.0.0.1]
Feb 12 11:10:46 wsrv1 postfix/smtpd[14786]: 28CE61D808: client=localhost.localdomain[127.0.0.1]
Feb 12 11:10:46 wsrv1 postfix/cleanup[14773]: 28CE61D808: message-id=<213807380575234423.5398158.725@mta900.em.linkedin.com>
Feb 12 11:10:46 wsrv1 postfix/qmgr[13911]: 28CE61D808: from=, size=1965, nrcpt=1 (queue active)
Feb 12 11:10:46 wsrv1 postfix/smtpd[14786]: disconnect from localhost.localdomain[127.0.0.1]
Feb 12 11:10:46 wsrv1 amavis[14344]: (14344-02) Passed CLEAN, [117.200.132.47] [63.211.90.176] -> , Message-ID: <213807380575234423.5398158.725@mta900.em.linkedin.com>, mail_id: WhzroLdjMk9g, Hits: 14.19, size: 1473, queued_as: 28CE61D808, 292 ms
Feb 12 11:10:46 wsrv1 postfix/pipe[14780]: 28CE61D808: to=, relay=maildrop, delay=0.02, delays=0.01/0/0/0.01, dsn=5.1.1, status=bounced (user unknown. Command output: ERR: authdaemon: s_connect() failed: Permission denied Invalid user specified. )
Feb 12 11:10:46 wsrv1 postfix/smtp[14774]: 048D81D801: to=, relay=127.0.0.1[127.0.0.1]:10024, delay=1.2, delays=0.87/0/0/0.29, dsn=2.0.0, status=sent (250 2.0.0 Ok, id=14344-02, from MTA([127.0.0.1]:10025): 250 2.0.0 Ok: queued as 28CE61D808)
Feb 12 11:10:46 wsrv1 postfix/qmgr[13911]: 048D81D801: removed
Feb 12 11:10:46 wsrv1 postfix/cleanup[14773]: 2C7791D80D: message-id=<20110212111046.2C7791D80D@wsrv1.smallbizwebhosts.co.uk>
Feb 12 11:10:46 wsrv1 postfix/bounce[14782]: 28CE61D808: sender non-delivery notification: 2C7791D80D
Feb 12 11:10:46 wsrv1 postfix/qmgr[13911]: 2C7791D80D: from=<>, size=4111, nrcpt=1 (queue active)
Feb 12 11:10:46 wsrv1 postfix/qmgr[13911]: 28CE61D808: removed
Feb 12 11:10:46 wsrv1 postfix/smtpd[14758]: disconnect from unknown[117.200.132.47]
Feb 12 11:10:51 wsrv1 postfix/smtp[14783]: 2C7791D80D: to=, relay=mx01.1and1.fr[212.227.15.150]:25, delay=5.2, delays=0/0/0.12/5.1, dsn=5.0.0, status=bounced (host mx01.1and1.fr[212.227.15.150] said: 550 : invalid address (in reply to RCPT TO command))
Feb 12 11:10:51 wsrv1 postfix/qmgr[13911]: 2C7791D80D: removed
Feb 12 11:14:06 wsrv1 postfix/anvil[14772]: statistics: max connection rate 1/60s for (smtp:209.85.210.175) at Feb 12 11:10:09
Feb 12 11:14:06 wsrv1 postfix/anvil[14772]: statistics: max connection count 1 for (smtp:209.85.210.175) at Feb 12 11:10:09
Feb 12 11:14:06 wsrv1 postfix/anvil[14772]: statistics: max cache size 2 at Feb 12 11:10:44
Feb 12 11:15:01 wsrv1 imapd: Connection, ip=[::1]
Feb 12 11:15:01 wsrv1 imapd: Disconnected, ip=[::1], time=0
Feb 12 11:15:01 wsrv1 pop3d: Connection, ip=[::1]
Feb 12 11:15:01 wsrv1 pop3d: Disconnected, ip=[::1]
Feb 12 11:15:01 wsrv1 postfix/smtpd[14833]: connect from localhost.localdomain[127.0.0.1]
Feb 12 11:15:01 wsrv1 postfix/smtpd[14833]: lost connection after CONNECT from localhost.localdomain[127.0.0.1]
Feb 12 11:15:01 wsrv1 postfix/smtpd[14833]: disconnect from localhost.localdomain[127.0.0.1]
Feb 12 11:15:11 wsrv1 postfix/smtpd[14778]: timeout after END-OF-MESSAGE from localhost.localdomain[127.0.0.1]
Feb 12 11:15:11 wsrv1 postfix/smtpd[14778]: disconnect from localhost.localdomain[127.0.0.1]
Feb 12 11:20:01 wsrv1 pop3d: Connection, ip=[::1]
Feb 12 11:20:01 wsrv1 pop3d: Disconnected, ip=[::1]
Feb 12 11:20:01 wsrv1 imapd: Connection, ip=[::1]
Feb 12 11:20:01 wsrv1 imapd: Disconnected, ip=[::1], time=0
Feb 12 11:20:02 wsrv1 postfix/smtpd[14899]: connect from localhost.localdomain[127.0.0.1]
Feb 12 11:20:02 wsrv1 postfix/smtpd[14899]: lost connection after CONNECT from localhost.localdomain[127.0.0.1]
Feb 12 11:20:02 wsrv1 postfix/smtpd[14899]: disconnect from localhost.localdomain[127.0.0.1]
Feb 12 11:22:30 wsrv1 postfix/smtpd[14925]: connect from S010600259c0b6f6e.va.shawcable.net[70.69.247.15]
Feb 12 11:22:30 wsrv1 postfix/smtpd[14925]: NOQUEUE: reject: RCPT from S010600259c0b6f6e.va.shawcable.net[70.69.247.15]: 554 5.7.1 <26803ian@smallbizwebhosts.co.uk>: Relay access denied; from= to=<26803ian@smallbizwebhosts.co.uk> proto=SMTP helo=
Feb 12 11:22:30 wsrv1 postfix/smtpd[14925]: lost connection after RCPT from S010600259c0b6f6e.va.shawcable.net[70.69.247.15]
Feb 12 11:22:30 wsrv1 postfix/smtpd[14925]: disconnect from S010600259c0b6f6e.va.shawcable.net[70.69.247.15]
Feb 12 11:22:47 wsrv1 pop3d: Connection, ip=[::ffff:209.85.210.152]
Feb 12 11:22:48 wsrv1 pop3d: LOGIN FAILED, user=ian@smallbusinesswebservices.co.uk, ip=[::ffff:209.85.210.152]
Feb 12 11:22:53 wsrv1 pop3d: Disconnected, ip=[::ffff:209.85.210.152]
Feb 12 11:25:01 wsrv1 imapd: Connection, ip=[::1]
Feb 12 11:25:01 wsrv1 pop3d: Connection, ip=[::1]
Feb 12 11:25:01 wsrv1 pop3d: Disconnected, ip=[::1]
Feb 12 11:25:01 wsrv1 imapd: Disconnected, ip=[::1], time=0
Feb 12 11:25:01 wsrv1 postfix/smtpd[14964]: connect from localhost.localdomain[127.0.0.1]
Feb 12 11:25:01 wsrv1 postfix/smtpd[14964]: lost connection after CONNECT from localhost.localdomain[127.0.0.1]
Feb 12 11:25:01 wsrv1 postfix/smtpd[14964]: disconnect from localhost.localdomain[127.0.0.1]
Feb 12 11:25:50 wsrv1 postfix/anvil[14927]: statistics: max connection rate 1/60s for (smtp:70.69.247.15) at Feb 12 11:22:30
Feb 12 11:25:50 wsrv1 postfix/anvil[14927]: statistics: max connection count 1 for (smtp:70.69.247.15) at Feb 12 11:22:30
Feb 12 11:25:50 wsrv1 postfix/anvil[14927]: statistics: max cache size 1 at Feb 12 11:22:30
Feb 12 11:29:51 wsrv1 postfix/qmgr[13911]: A44C61D804: from=<>, size=5323, nrcpt=1 (queue active)
Feb 12 11:29:51 wsrv1 postfix/smtp[15003]: connect to promote-bz.net[111.224.250.132]:25: Connection refused
Feb 12 11:29:51 wsrv1 postfix/smtp[15003]: A44C61D804: to=, relay=none, delay=25300, delays=25300/0.03/0.41/0, dsn=4.4.1, status=deferred (connect to promote-bz.net[111.224.250.132]:25: Connection refused)
Feb 12 11:30:01 wsrv1 imapd: Connection, ip=[::1]
Feb 12 11:30:01 wsrv1 pop3d: Connection, ip=[::1]
Feb 12 11:30:01 wsrv1 pop3d: Disconnected, ip=[::1]
Feb 12 11:30:01 wsrv1 imapd: Disconnected, ip=[::1], time=0
Feb 12 11:30:01 wsrv1 postfix/smtpd[15032]: connect from localhost.localdomain[127.0.0.1]
Feb 12 11:30:01 wsrv1 postfix/smtpd[15032]: lost connection after CONNECT from localhost.localdomain[127.0.0.1]
Feb 12 11:30:01 wsrv1 postfix/smtpd[15032]: disconnect from localhost.localdomain[127.0.0.1]
Feb 12 11:31:57 wsrv1 pop3d: Connection, ip=[::ffff:209.85.214.138]
Feb 12 11:31:58 wsrv1 pop3d: LOGIN FAILED, user=info@dreamdiversltd.co.uk, ip=[::ffff:209.85.214.138]
Feb 12 11:32:03 wsrv1 pop3d: Disconnected, ip=[::ffff:209.85.214.138]
Feb 12 11:35:01 wsrv1 pop3d: Connection, ip=[::1]
Feb 12 11:35:01 wsrv1 pop3d: Disconnected, ip=[::1]
Feb 12 11:35:01 wsrv1 imapd: Connection, ip=[::1]
Feb 12 11:35:01 wsrv1 imapd: Disconnected, ip=[::1], time=0
Feb 12 11:35:01 wsrv1 postfix/smtpd[15102]: connect from localhost.localdomain[127.0.0.1]
Feb 12 11:35:01 wsrv1 postfix/smtpd[15102]: lost connection after CONNECT from localhost.localdomain[127.0.0.1]
Feb 12 11:35:01 wsrv1 postfix/smtpd[15102]: disconnect from localhost.localdomain[127.0.0.1]
Feb 12 11:36:56 wsrv1 postfix/smtpd[15122]: connect from mail-iw0-f175.google.com[209.85.214.175]
Feb 12 11:36:57 wsrv1 postfix/smtpd[15122]: D3DE81D801: client=mail-iw0-f175.google.com[209.85.214.175]
Feb 12 11:36:58 wsrv1 postfix/cleanup[15126]: D3DE81D801: message-id=
Feb 12 11:36:58 wsrv1 postfix/qmgr[13911]: D3DE81D801: from=, size=1850, nrcpt=1 (queue active)
Feb 12 11:36:58 wsrv1 postfix/smtpd[15130]: connect from localhost.localdomain[127.0.0.1]
Feb 12 11:36:58 wsrv1 postfix/smtpd[15130]: 5DA9D1D808: client=localhost.localdomain[127.0.0.1]
Feb 12 11:36:58 wsrv1 postfix/cleanup[15126]: 5DA9D1D808: message-id=
Feb 12 11:36:58 wsrv1 postfix/qmgr[13911]: 5DA9D1D808: from=, size=2382, nrcpt=1 (queue active)
Feb 12 11:36:58 wsrv1 postfix/smtpd[15130]: disconnect from localhost.localdomain[127.0.0.1]
Feb 12 11:36:58 wsrv1 amavis[14358]: (14358-02) Passed CLEAN, [209.85.214.175] [209.85.214.175] -> , Message-ID: , mail_id: kiYdGvxHE27I, Hits: -0.699, size: 1850, queued_as: 5DA9D1D808, 286 ms
Feb 12 11:36:58 wsrv1 postfix/smtp[15127]: D3DE81D801: to=, relay=127.0.0.1[127.0.0.1]:10024, delay=0.67, delays=0.37/0.01/0/0.29, dsn=2.0.0, status=sent (250 2.0.0 Ok, id=14358-02, from MTA([127.0.0.1]:10025): 250 2.0.0 Ok: queued as 5DA9D1D808)
Feb 12 11:36:58 wsrv1 postfix/qmgr[13911]: D3DE81D801: removed
Feb 12 11:36:58 wsrv1 postfix/pipe[15132]: 5DA9D1D808: to=, relay=maildrop, delay=0.03, delays=0.01/0.01/0/0.01, dsn=5.1.1, status=bounced (user unknown. Command output: ERR: authdaemon: s_connect() failed: Permission denied Invalid user specified. )
Feb 12 11:36:58 wsrv1 postfix/cleanup[15126]: 63FA41D80C: message-id=<20110212113658.63FA41D80C@wsrv1.smallbizwebhosts.co.uk>
Feb 12 11:36:58 wsrv1 postfix/qmgr[13911]: 63FA41D80C: from=<>, size=4638, nrcpt=1 (queue active)
Feb 12 11:36:58 wsrv1 postfix/bounce[15134]: 5DA9D1D808: sender non-delivery notification: 63FA41D80C
Feb 12 11:36:58 wsrv1 postfix/qmgr[13911]: 5DA9D1D808: removed
Feb 12 11:36:58 wsrv1 imapd: Connection, ip=[::1]
Feb 12 11:36:58 wsrv1 imapd: LOGIN FAILED, user=ian@smallbizwebhosts.co.uk, ip=[::1]
Feb 12 11:37:00 wsrv1 postfix/smtp[15135]: 63FA41D80C: to=, relay=ASPMX2.GOOGLEMAIL.COM[74.125.43.27]:25, delay=2.2, delays=0/0.01/0.17/2, dsn=2.0.0, status=sent (250 2.0.0 OK 1297510620 rc7si968760bkb.94)
Feb 12 11:37:00 wsrv1 postfix/qmgr[13911]: 63FA41D80C: removed
Feb 12 11:37:03 wsrv1 imapd: LOGOUT, ip=[::1], rcvd=64, sent=332
Feb 12 11:37:28 wsrv1 postfix/smtpd[15122]: disconnect from mail-iw0-f175.google.com[209.85.214.175]
Feb 12 11:40:01 wsrv1 pop3d: Connection, ip=[::1]
Feb 12 11:40:01 wsrv1 pop3d: Disconnected, ip=[::1]
Feb 12 11:40:01 wsrv1 imapd: Connection, ip=[::1]
Feb 12 11:40:01 wsrv1 imapd: Disconnected, ip=[::1], ti
with the relevant section being

Code:
Feb 12 11:35:01 wsrv1 postfix/smtpd[15102]: connect from localhost.localdomain[127.0.0.1]
Feb 12 11:35:01 wsrv1 postfix/smtpd[15102]: lost connection after CONNECT from localhost.localdomain[127.0.0.1]
Feb 12 11:35:01 wsrv1 postfix/smtpd[15102]: disconnect from localhost.localdomain[127.0.0.1]
Feb 12 11:36:56 wsrv1 postfix/smtpd[15122]: connect from mail-iw0-f175.google.com[209.85.214.175]
Feb 12 11:36:57 wsrv1 postfix/smtpd[15122]: D3DE81D801: client=mail-iw0-f175.google.com[209.85.214.175]
Feb 12 11:36:58 wsrv1 postfix/cleanup[15126]: D3DE81D801: message-id=
Feb 12 11:36:58 wsrv1 postfix/qmgr[13911]: D3DE81D801: from=, size=1850, nrcpt=1 (queue active)
Feb 12 11:36:58 wsrv1 postfix/smtpd[15130]: connect from localhost.localdomain[127.0.0.1]
Feb 12 11:36:58 wsrv1 postfix/smtpd[15130]: 5DA9D1D808: client=localhost.localdomain[127.0.0.1]
Feb 12 11:36:58 wsrv1 postfix/cleanup[15126]: 5DA9D1D808: message-id=
Feb 12 11:36:58 wsrv1 postfix/qmgr[13911]: 5DA9D1D808: from=, size=2382, nrcpt=1 (queue active)
Feb 12 11:36:58 wsrv1 postfix/smtpd[15130]: disconnect from localhost.localdomain[127.0.0.1]
Feb 12 11:36:58 wsrv1 amavis[14358]: (14358-02) Passed CLEAN, [209.85.214.175] [209.85.214.175] -> , Message-ID: , mail_id: kiYdGvxHE27I, Hits: -0.699, size: 1850, queued_as: 5DA9D1D808, 286 ms
Feb 12 11:36:58 wsrv1 postfix/smtp[15127]: D3DE81D801: to=, relay=127.0.0.1[127.0.0.1]:10024, delay=0.67, delays=0.37/0.01/0/0.29, dsn=2.0.0, status=sent (250 2.0.0 Ok, id=14358-02, from MTA([127.0.0.1]:10025): 250 2.0.0 Ok: queued as 5DA9D1D808)
Feb 12 11:36:58 wsrv1 postfix/qmgr[13911]: D3DE81D801: removed
Feb 12 11:36:58 wsrv1 postfix/pipe[15132]: 5DA9D1D808: to=, relay=maildrop, delay=0.03, delays=0.01/0.01/0/0.01, dsn=5.1.1, status=bounced (user unknown. Command output: ERR: authdaemon: s_connect() failed: Permission denied Invalid user specified. )
Feb 12 11:36:58 wsrv1 postfix/cleanup[15126]: 63FA41D80C: message-id=<20110212113658.63FA41D80C@wsrv1.smallbizwebhosts.co.uk>
Feb 12 11:36:58 wsrv1 postfix/qmgr[13911]: 63FA41D80C: from=<>, size=4638, nrcpt=1 (queue active)
Feb 12 11:36:58 wsrv1 postfix/bounce[15134]: 5DA9D1D808: sender non-delivery notification: 63FA41D80C
Feb 12 11:36:58 wsrv1 postfix/qmgr[13911]: 5DA9D1D808: removed
Feb 12 11:36:58 wsrv1 imapd: Connection, ip=[::1]
Feb 12 11:36:58 wsrv1 imapd: LOGIN FAILED, user=ian@smallbizwebhosts.co.uk, ip=[::1]
Feb 12 11:37:00 wsrv1 postfix/smtp[15135]: 63FA41D80C: to=, relay=ASPMX2.GOOGLEMAIL.COM[74.125.43.27]:25, delay=2.2, delays=0/0.01/0.17/2, dsn=2.0.0, status=sent (250 2.0.0 OK 1297510620 rc7si968760bkb.94)
Feb 12 11:37:00 wsrv1 postfix/qmgr[13911]: 63FA41D80C: removed
Feb 12 11:37:03 wsrv1 imapd: LOGOUT, ip=[::1], rcvd=64, sent=332
Feb 12 11:37:28 wsrv1 postfix/smtpd[15122]: disconnect from mail-iw0-f175.google.com[209.85.214.175]
Feb 12 11:40:01 wsrv1 pop3d: Connection, ip=[::1]
Feb 12 11:40:01 wsrv1 pop3d: Disconnected, ip=[::1]
Feb 12 11:40:01 wsrv1 imapd: Connection, ip=[::1]
Feb 12 11:40:01 wsrv1 imapd: Disconnected, ip=[::1]
I have checked the mysql database and the user accounts are listed in the user_email table
the password field looks like the passwords are hashed

but when looking at the /etc/postfix/sasl/smtpd.conf file it is showing
Code:
pwcheck_method: saslauthd
mech_list : plain login
allow_plaintext: true
authprop_plugin:mysql
sql_hostnames: 127.0.0.1
sql_user: ispconfig
sqpasswd:*****************
sql_database:dbispconfig
sql_select: select password from mail_user where email = '%u'
where ******************** is the password

so is authorization failing because the authorization test is trying to compare a plain text password with the hashed password stored in the database?

or do I have other problems?

Last edited by Ian Wilson; 12th February 2011 at 13:09.
Reply With Quote
Sponsored Links
  #2  
Old 13th February 2011, 19:43
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,727 Times in 2,565 Posts
Default

Can you post your /etc/postfix/main.cf and /etc/postfix/master.cf?
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #3  
Old 14th February 2011, 07:52
Ian Wilson Ian Wilson is offline
Junior Member
 
Join Date: Feb 2011
Posts: 19
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Hi falko,
Thanks for your response
Here are the file contents as requested !

main.cf
Code:
# Global Postfix configuration file. This file lists only a subset
# of all 300+ parameters. See the sample-xxx.cf files for a full list.
# 
# The general format is lines with parameter = value pairs. Lines
# that begin with whitespace continue the previous line. A value can
# contain references to other $names or ${name}s.
#
# NOTE - CHANGE NO MORE THAN 2-3 PARAMETERS AT A TIME, AND TEST IF
# POSTFIX STILL WORKS AFTER EVERY CHANGE.

# SOFT BOUNCE
#
# The soft_bounce parameter provides a limited safety net for
# testing.  When soft_bounce is enabled, mail will remain queued that
# would otherwise bounce. This parameter disables locally-generated
# bounces, and prevents the SMTP server from rejecting mail permanently
# (by changing 5xx replies into 4xx replies). However, soft_bounce
# is no cure for address rewriting mistakes or mail routing mistakes.
#
#soft_bounce = no

# LOCAL PATHNAME INFORMATION
#
# The queue_directory specifies the location of the Postfix queue.
# This is also the root directory of Postfix daemons that run chrooted.
# See the files in examples/chroot-setup for setting up Postfix chroot
# environments on different UNIX systems.
#
queue_directory = /var/spool/postfix

# The command_directory parameter specifies the location of all
# postXXX commands.
#
command_directory = /usr/sbin

# The daemon_directory parameter specifies the location of all Postfix
# daemon programs (i.e. programs listed in the master.cf file). This
# directory must be owned by root.
#
daemon_directory = /usr/lib/postfix

# QUEUE AND PROCESS OWNERSHIP
#
# The mail_owner parameter specifies the owner of the Postfix queue
# and of most Postfix daemon processes.  Specify the name of a user
# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM.  In
# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
# USER.
#
mail_owner = postfix

# The default_privs parameter specifies the default rights used by
# the local delivery agent for delivery to external file or command.
# These rights are used in the absence of a recipient user context.
# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
#
#default_privs = nobody

# INTERNET HOST AND DOMAIN NAMES
# 
# The myhostname parameter specifies the internet hostname of this
# mail system. The default is to use the fully-qualified domain name
# from gethostname(). $myhostname is used as a default value for many
# other configuration parameters.
#
#myhostname = host.domain.tld
#myhostname = virtual.domain.tld

# The mydomain parameter specifies the local internet domain name.
# The default is to use $myhostname minus the first component.
# $mydomain is used as a default value for many other configuration
# parameters.
#
#mydomain = domain.tld

# SENDING MAIL
# 
# The myorigin parameter specifies the domain that locally-posted
# mail appears to come from. The default is to append $myhostname,
# which is fine for small sites.  If you run a domain with multiple
# machines, you should (1) change this to $mydomain and (2) set up
# a domain-wide alias database that aliases each user to
# user@that.users.mailhost.
#
# For the sake of consistency between sender and recipient addresses,
# myorigin also specifies the default domain name that is appended
# to recipient addresses that have no @domain part.
#
#myorigin = $myhostname
#myorigin = $mydomain

# RECEIVING MAIL

# The inet_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on.  By default,
# the software claims all active interfaces on the machine. The
# parameter also controls delivery of mail to user@[ip.address].
#
# See also the proxy_interfaces parameter, for network addresses that
# are forwarded to us via a proxy or network address translator.
#
# Note: you need to stop/start Postfix when this parameter changes.
#
#inet_interfaces = all
#inet_interfaces = $myhostname
#inet_interfaces = $myhostname, localhost
#inet_interfaces = all

# The proxy_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on by way of a
# proxy or network address translation unit. This setting extends
# the address list specified with the inet_interfaces parameter.
#
# You must specify your proxy/NAT addresses when your system is a
# backup MX host for other domains, otherwise mail delivery loops
# will happen when the primary MX host is down.
#
#proxy_interfaces =
#proxy_interfaces = 1.2.3.4

# The mydestination parameter specifies the list of domains that this
# machine considers itself the final destination for.
#
# These domains are routed to the delivery agent specified with the
# local_transport parameter setting. By default, that is the UNIX
# compatible delivery agent that lookups all recipients in /etc/passwd
# and /etc/aliases or their equivalent.
#
# The default is $myhostname + localhost.$mydomain.  On a mail domain
# gateway, you should also include $mydomain.
#
# Do not specify the names of virtual domains - those domains are
# specified elsewhere (see sample-virtual.cf).
#
# Do not specify the names of domains that this machine is backup MX
# host for. Specify those names via the relay_domains settings for
# the SMTP server, or use permit_mx_backup if you are lazy (see
# sample-smtpd.cf).
#
# The local machine is always the final destination for mail addressed
# to user@[the.net.work.address] of an interface that the mail system
# receives mail on (see the inet_interfaces parameter).
#
# Specify a list of host or domain names, /file/name or type:table
# patterns, separated by commas and/or whitespace. A /file/name
# pattern is replaced by its contents; a type:table is matched when
# a name matches a lookup key (the right-hand side is ignored).
# Continue long lines by starting the next line with whitespace.
#
# DO NOT LIST RELAY DESTINATIONS IN MYDESTINATION.
# SPECIFY RELAY DESTINATIONS IN RELAY_DOMAINS.
#
# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
#
mydestination = wsrv1.smallbizwebhosts.co.uk, localhost, localhost.localdomain
#mydestination = $myhostname, localhost.$mydomain $mydomain
#mydestination = $myhostname, localhost.$mydomain, $mydomain,
#	mail.$mydomain, www.$mydomain, ftp.$mydomain

# REJECTING MAIL FOR UNKNOWN LOCAL USERS
#
# The local_recipient_maps parameter specifies optional lookup tables
# with all names or addresses of users that are local with respect
# to $mydestination and $inet_interfaces.
#
# If this parameter is defined, then the SMTP server will reject
# mail for unknown local users. This parameter is defined by default.
#
# To turn off local recipient checking in the SMTP server, specify
# local_recipient_maps = (i.e. empty).
#
# The default setting assumes that you use the default Postfix local
# delivery agent for local delivery. You need to update the
# local_recipient_maps setting if:
#
# - You define $mydestination domain recipients in files other than
#   /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
#   For example, you define $mydestination domain recipients in    
#   the $virtual_mailbox_maps files.
#
# - You redefine the local delivery agent in master.cf.
#
# - You redefine the "local_transport" setting in main.cf.
#
# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
#   feature of the Postfix local delivery agent (see sample-local.cf).
#
# Details are described in the LOCAL_RECIPIENT_README file.
#
# Beware: if the Postfix SMTP server runs chrooted, you probably have
# to access the passwd file via the proxymap service, in order to
# overcome chroot restrictions. The alternative, having a copy of
# the system passwd file in the chroot jail is just not practical.
#
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify a bare username, an @domain.tld
# wild-card, or specify a user@domain.tld address.
# 
#local_recipient_maps = unix:passwd.byname $alias_maps
#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
#local_recipient_maps =

# The unknown_local_recipient_reject_code specifies the SMTP server
# response code when a recipient domain matches $mydestination or
# $inet_interfaces, while $local_recipient_maps is non-empty and the
# recipient address or address local-part is not found.
#
# The default setting is 550 (reject mail) but it is safer to start
# with 450 (try again later) until you are certain that your
# local_recipient_maps settings are OK.
#
#unknown_local_recipient_reject_code = 550
unknown_local_recipient_reject_code = 450

# TRUST AND RELAY CONTROL

# The mynetworks parameter specifies the list of "trusted" SMTP
# clients that have more privileges than "strangers".
#
# In particular, "trusted" SMTP clients are allowed to relay mail
# through Postfix.  See the smtpd_recipient_restrictions parameter
# in file sample-smtpd.cf.
#
# You can specify the list of "trusted" network addresses by hand
# or you can let Postfix do it for you (which is the default).
#
# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
# clients in the same IP subnetworks as the local machine.
# On Linux, this does works correctly only with interfaces specified
# with the "ifconfig" command.
# 
# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
# clients in the same IP class A/B/C networks as the local machine.
# Don't do this with a dialup site - it would cause Postfix to "trust"
# your entire provider's network.  Instead, specify an explicit
# mynetworks list by hand, as described below.
#  
# Specify "mynetworks_style = host" when Postfix should "trust"
# only the local machine.
# 
#mynetworks_style = class
#mynetworks_style = subnet
mynetworks_style = host

# Alternatively, you can specify the mynetworks list by hand, in
# which case Postfix ignores the mynetworks_style setting.
#
# Specify an explicit list of network/netmask patterns, where the
# mask specifies the number of bits in the network part of a host
# address.
#
# You can also specify the absolute pathname of a pattern file instead
# of listing the patterns here. Specify type:table for table-based lookups
# (the value on the table right-hand side is not used).
#
#mynetworks = 168.100.189.0/28, 127.0.0.0/8
#mynetworks = $config_directory/mynetworks
#mynetworks = hash:/etc/postfix/network_table

# The relay_domains parameter restricts what destinations this system will
# relay mail to.  See the smtpd_recipient_restrictions restriction in the
# file sample-smtpd.cf for detailed information.
#
# By default, Postfix relays mail
# - from "trusted" clients (IP address matches $mynetworks) to any destination,
# - from "untrusted" clients to destinations that match $relay_domains or
#   subdomains thereof, except addresses with sender-specified routing.
# The default relay_domains value is $mydestination.
# 
# In addition to the above, the Postfix SMTP server by default accepts mail
# that Postfix is final destination for:
# - destinations that match $inet_interfaces,
# - destinations that match $mydestination
# - destinations that match $virtual_alias_domains,
# - destinations that match $virtual_mailbox_domains.
# These destinations do not need to be listed in $relay_domains.
# 
# Specify a list of hosts or domains, /file/name patterns or type:name
# lookup tables, separated by commas and/or whitespace.  Continue
# long lines by starting the next line with whitespace. A file name
# is replaced by its contents; a type:name table is matched when a
# (parent) domain appears as lookup key.
#
# NOTE: Postfix will not automatically forward mail for domains that
# list this system as their primary or backup MX host. See the
# permit_mx_backup restriction in the file sample-smtpd.cf.
#
#relay_domaixxxns = $mydestination

# INTERNET OR INTRANET

# The relayhost parameter specifies the default host to send mail to
# when no entry is matched in the optional transport(5) table. When
# no relayhost is given, mail is routed directly to the destination.
#
# On an intranet, specify the organizational domain name. If your
# internal DNS uses no MX records, specify the name of the intranet
# gateway host instead.
#
# In the case of SMTP, specify a domain, host, host:port, [host]:port,
# [address] or [address]:port; the form [host] turns off MX lookups.
#
# If you're connected via UUCP, see also the default_transport parameter.
#
#relayhost = $mydomain
#relayhost = gateway.my.domain
#relayhost = uucphost
#relayhost = [an.ip.add.ress]

# REJECTING UNKNOWN RELAY USERS
#
# The relay_recipient_maps parameter specifies optional lookup tables
# with all addresses in the domains that match $relay_domains.
#
# If this parameter is defined, then the SMTP server will reject
# mail for unknown relay users. This feature is off by default.
#
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify an @domain.tld wild-card, or specify
# a user@domain.tld address.
# 
#relay_recipient_maps = hash:/etc/postfix/relay_recipients

# INPUT RATE CONTROL
#
# The in_flow_delay configuration parameter implements mail input
# flow control. This feature is turned on by default, although it
# still needs further development (it's disabled on SCO UNIX due
# to an SCO bug).
# 
# A Postfix process will pause for $in_flow_delay seconds before
# accepting a new message, when the message arrival rate exceeds the
# message delivery rate. With the default 100 SMTP server process
# limit, this limits the mail inflow to 100 messages a second more
# than the number of messages delivered per second.
# 
# Specify 0 to disable the feature. Valid delays are 0..10.
# 
#in_flow_delay = 1s

# ADDRESS REWRITING
#
# Insert text from sample-rewrite.cf if you need to do address
# masquerading.
#
# Insert text from sample-canonical.cf if you need to do address
# rewriting, or if you need username->Firstname.Lastname mapping.

# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
#
# Insert text from sample-virtual.cf if you need virtual domain support.

# "USER HAS MOVED" BOUNCE MESSAGES
#
# Insert text from sample-relocated.cf if you need "user has moved"
# style bounce messages. Alternatively, you can bounce recipients
# with an SMTP server access table. See sample-smtpd.cf.

# TRANSPORT MAP
#
# Insert text from sample-transport.cf if you need explicit routing.

# ALIAS DATABASE
#
# The alias_maps parameter specifies the list of alias databases used
# by the local delivery agent. The default list is system dependent.
#
# On systems with NIS, the default is to search the local alias
# database, then the NIS alias database. See aliases(5) for syntax
# details.
# 
# If you change the alias database, run "postalias /etc/aliases" (or
# wherever your system stores the mail alias file), or simply run
# "newaliases" to build the necessary DBM or DB file.
#
# It will take a minute or so before changes become visible.  Use
# "postfix reload" to eliminate the delay.
#
#alias_maps = dbm:/etc/aliases
alias_maps = hash:/etc/aliases
#alias_maps = hash:/etc/aliases, nis:mail.aliases
#alias_maps = netinfo:/aliases

# The alias_database parameter specifies the alias database(s) that
# are built with "newaliases" or "sendmail -bi".  This is a separate
# configuration parameter, because alias_maps (see above) may specify
# tables that are not necessarily all under control by Postfix.
#
#alias_database = dbm:/etc/aliases
#alias_database = dbm:/etc/mail/aliases
#alias_database = hash:/etc/aliases
#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases

# ADDRESS EXTENSIONS (e.g., user+foo)
#
# The recipient_delimiter parameter specifies the separator between
# user names and address extensions (user+foo). See canonical(5),
# local(8), relocated(5) and virtual(5) for the effects this has on
# aliases, canonical, virtual, relocated and .forward file lookups.
# Basically, the software tries user+foo and .forward+foo before
# trying user and .forward.
#
#recipient_delimiter = +

# DELIVERY TO MAILBOX
#
# The home_mailbox parameter specifies the optional pathname of a
# mailbox file relative to a user's home directory. The default
# mailbox file is /var/spool/mail/user or /var/mail/user.  Specify
# "Maildir/" for qmail-style delivery (the / is required).
#
#home_mailbox = Mailbox
#home_mailbox = Maildir/
 
# The mail_spool_directory parameter specifies the directory where
# UNIX-style mailboxes are kept. The default setting depends on the
# system type.
#
#mail_spool_directory = /var/mail
#mail_spool_directory = /var/spool/mail

# The mailbox_command parameter specifies the optional external
# command to use instead of mailbox delivery. The command is run as
# the recipient with proper HOME, SHELL and LOGNAME environment settings.
# Exception:  delivery for root is done as $default_user.
#
# Other environment variables of interest: USER (recipient username),
# EXTENSION (address extension), DOMAIN (domain part of address),
# and LOCAL (the address localpart).
#
# Unlike other Postfix configuration parameters, the mailbox_command
# parameter is not subjected to $parameter substitutions. This is to
# make it easier to specify shell syntax (see example below).
#
# Avoid shell meta characters because they will force Postfix to run
# an expensive shell process. Procmail alone is expensive enough.
#
# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
#
#mailbox_command = /some/where/procmail
#mailbox_command = /some/where/procmail -a "$EXTENSION"

# The mailbox_transport specifies the optional transport in master.cf
# to use after processing aliases and .forward files. This parameter
# has precedence over the mailbox_command, fallback_transport and
# luser_relay parameters.
#
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf.  The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for    
# non-UNIX accounts with "User unknown in local recipient table".
#
#mailbox_transport = lmtp:unix:/file/name
#mailbox_transport = cyrus

# The fallback_transport specifies the optional transport in master.cf
# to use for recipients that are not found in the UNIX passwd database.
# This parameter has precedence over the luser_relay parameter.
#
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf.  The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for    
# non-UNIX accounts with "User unknown in local recipient table".
#
#fallback_transport = lmtp:unix:/file/name
#fallback_transport = cyrus
#fallback_transport =

# The luser_relay parameter specifies an optional destination address
# for unknown recipients.  By default, mail for unknown@$mydestination
# and unknown@[$inet_interfaces] is returned as undeliverable.
#
# The following expansions are done on luser_relay: $user (recipient
# username), $shell (recipient shell), $home (recipient home directory),
# $recipient (full recipient address), $extension (recipient address
# extension), $domain (recipient domain), $local (entire recipient
# localpart), $recipient_delimiter. Specify ${name?value} or
# ${name:value} to expand value only when $name does (does not) exist.
#
# luser_relay works only for the default Postfix local delivery agent.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must specify "local_recipient_maps =" (i.e. empty) in
# the main.cf file, otherwise the SMTP server will reject mail for    
# non-UNIX accounts with "User unknown in local recipient table".
#
#luser_relay = $user@other.host
#luser_relay = $local@other.host
#luser_relay = admin+$local
  
# JUNK MAIL CONTROLS
# 
# The controls listed here are only a very small subset. See the file
# sample-smtpd.cf for an elaborate list of anti-UCE controls.

# The header_checks parameter specifies an optional table with patterns
# that each logical message header is matched against, including
# headers that span multiple physical lines.
#
# By default, these patterns also apply to MIME headers and to the
# headers of attached messages. With older Postfix versions, MIME and
# attached message headers were treated as body text.
#
# For details, see the sample-filter.cf file.
#
#header_checks = regexp:/etc/postfix/header_checks

# FAST ETRN SERVICE
#
# Postfix maintains per-destination logfiles with information about
# deferred mail, so that mail can be flushed quickly with the SMTP
# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
# 
# By default, Postfix maintains deferred mail logfile information
# only for destinations that Postfix is willing to relay to (as
# specified in the relay_domains parameter). For other destinations,
# Postfix attempts to deliver ALL queued mail after receiving the
# SMTP "ETRN domain.tld" command, or after execution of "sendmail
# -qRdomain.tld". This can be slow when a lot of mail is queued.
# 
# The fast_flush_domains parameter controls what destinations are
# eligible for this "fast ETRN/sendmail -qR" service.
# 
#fast_flush_domains = $relay_domains
#fast_flush_domains =

# SHOW SOFTWARE VERSION OR NOT
#
# The smtpd_banner parameter specifies the text that follows the 220
# code in the SMTP server's greeting banner. Some people like to see
# the mail version advertised. By default, Postfix shows no version.
#
# You MUST specify $myhostname at the start of the text. That is an
# RFC requirement. Postfix itself does not care.
#
#smtpd_banner = $myhostname ESMTP $mail_name
#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)

# PARALLEL DELIVERY TO THE SAME DESTINATION
#
# How many parallel deliveries to the same user or domain? With local
# delivery, it does not make sense to do massively parallel delivery
# to the same user, because mailbox updates must happen sequentially,
# and expensive pipelines in .forward files can cause disasters when
# too many are run at the same time. With SMTP deliveries, 10
# simultaneous connections to the same domain could be sufficient to
# raise eyebrows.
# 
# Each message delivery transport has its XXX_destination_concurrency_limit
# parameter.  The default is $default_destination_concurrency_limit for
# most delivery transports. For the local delivery agent the default is 2.

#local_destination_concurrency_limit = 2
#default_destination_concurrency_limit = 20

# DEBUGGING CONTROL
#
# The debug_peer_level parameter specifies the increment in verbose
# logging level when an SMTP client or server host name or address
# matches a pattern in the debug_peer_list parameter.
#
debug_peer_level = 2

# The debug_peer_list parameter specifies an optional list of domain
# or network patterns, /file/name patterns or type:name tables. When
# an SMTP client or server host name or address matches a pattern,
# increase the verbose logging level by the amount specified in the
# debug_peer_level parameter.
#
#debug_peer_list = 127.0.0.1
#debug_peer_list = some.domain

# The debugger_command specifies the external command that is executed
# when a Postfix daemon program is run with the -D option.
#
# Use "command .. & sleep 5" so that the debugger can attach before
# the process marches on. If you use an X-based debugger, be sure to
# set up your XAUTHORITY environment variable before starting Postfix.
#
debugger_command =
	 PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
	 ddd $daemon_directory/$process_name $process_id & sleep 5

# If you don't have X installed on the Postfix machine, try:
# debugger_command =
#	PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
#	echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
#	>$config_directory/$process_name.$process_id.log & sleep 5

# INSTALL-TIME CONFIGURATION INFORMATION
#
# The following parameters are used when installing a new Postfix version.
# 
# sendmail_path: The full pathname of the Postfix sendmail command.
# This is the Sendmail-compatible mail posting interface.
# 
sendmail_path = /usr/sbin/sendmail.postfix

# newaliases_path: The full pathname of the Postfix newaliases command.
# This is the Sendmail-compatible command to build alias databases.
#
newaliases_path = /usr/bin/newaliases.postfix

# mailq_path: The full pathname of the Postfix mailq command.  This
# is the Sendmail-compatible mail queue listing command.
# 
mailq_path = /usr/bin/mailq.postfix

# setgid_group: The group for mail submission and queue management
# commands.  This must be a group name with a numerical group ID that
# is not shared with other accounts, not even with the Postfix account.
#
setgid_group = postdrop

# manpage_directory: The location of the Postfix on-line manual pages.
#
manpage_directory = /usr/share/man

# sample_directory: The location of the Postfix sample configuration files.
#
sample_directory = /usr/share/doc/postfix-2.0.18/samples

# readme_directory: The location of the Postfix README files.
#
readme_directory = /usr/share/doc/postfix
alias_database = hash:/etc/aliases

# Following entries REQUIRED by Matrix control panel
virtual_maps = hash:/etc/postfix/virtual
transport_maps = proxy:mysql:/etc/postfix/mysql-virtual_transports.cf
virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf
local_destination_concurrency_limit=1
maildrop_destination_concurrency_limit = 1
maildrop_destination_recipient_limit = 1
relay_domains = mysql:/etc/postfix/mysql-virtual_relaydomains.cf
html_directory = /usr/share/doc/postfix/html
myhostname = wsrv1.smallbizwebhosts.co.uk
mynetworks = 127.0.0.0/8 [::1]/128
virtual_alias_domains = 
virtual_alias_maps = proxy:mysql:/etc/postfix/mysql-virtual_forwardings.cf, mysql:/etc/postfix/mysql-virtual_email2email.cf
virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf
virtual_mailbox_base = /var/vmail
virtual_uid_maps = static:5000
virtual_gid_maps = static:5000
smtpd_sasl_auth_enable = yes
broken_sasl_auth_clients = yes
smtpd_sasl_authenticated_header = yes
smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, check_recipient_access mysql:/etc/postfix/mysql-virtual_recipient.cf, reject_unauth_destination
smtpd_use_tls = yes
smtpd_tls_security_level = may
smtpd_tls_cert_file = /etc/postfix/smtpd.cert
smtpd_tls_key_file = /etc/postfix/smtpd.key
relay_recipient_maps = mysql:/etc/postfix/mysql-virtual_relayrecipientmaps.cf
virtual_create_maildirsize = yes
virtual_maildir_extended = yes
virtual_mailbox_limit_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailbox_limit_maps.cf
virtual_mailbox_limit_override = yes
virtual_maildir_limit_message = "The user you are trying to reach is over quota."
virtual_overquota_bounce = yes
proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $virtual_mailbox_limit_maps
smtpd_sender_restrictions = check_sender_access mysql:/etc/postfix/mysql-virtual_sender.cf
smtpd_client_restrictions = check_client_access mysql:/etc/postfix/mysql-virtual_client.cf
virtual_transport = maildrop
header_checks = regexp:/etc/postfix/header_checks
mime_header_checks = regexp:/etc/postfix/mime_header_checks
nested_header_checks = regexp:/etc/postfix/nested_header_checks
body_checks = regexp:/etc/postfix/body_checks
content_filter = amavis:[127.0.0.1]:10024
receive_override_options = no_address_mappings
relayhost = 
mailbox_size_limit = 0
message_size_limit = 0
master.cf
Code:
#
# Postfix master process configuration file.  Each logical line 
# describes how a Postfix daemon program should be run. 
#
# A logical line starts with non-whitespace, non-comment text.
# Empty lines and whitespace-only lines are ignored, as are comment 
# lines whose first non-whitespace character is a `#'.  
# A line that starts with whitespace continues a logical line.
#
# The fields that make up each line are described below. A "-" field
# value requests that a default value be used for that field.
#
# Service: any name that is valid for the specified transport type
# (the next field).  With INET transports, a service is specified as
# host:port.  The host part (and colon) may be omitted. Either host
# or port may be given in symbolic form or in numeric form. Examples
# for the SMTP server:  localhost:smtp receives mail via the loopback
# interface only; 10025 receives mail on port 10025.
#
# Transport type: "inet" for Internet sockets, "unix" for UNIX-domain
# sockets, "fifo" for named pipes.
#
# Private: whether or not access is restricted to the mail system.
# Default is private service.  Internet (inet) sockets can't be private.
#
# Unprivileged: whether the service runs with root privileges or as
# the owner of the Postfix system (the owner name is controlled by the
# mail_owner configuration variable in the main.cf file). Only the
# pipe, virtual and local delivery daemons require privileges.
#
# Chroot: whether or not the service runs chrooted to the mail queue
# directory (pathname is controlled by the queue_directory configuration
# variable in the main.cf file). Presently, all Postfix daemons can run
# chrooted, except for the pipe, virtual and local delivery daemons.
# The proxymap server can run chrooted, but doing so defeats most of
# the purpose of having that service in the first place.
# The files in the examples/chroot-setup subdirectory describe how
# to set up a Postfix chroot environment for your type of machine.
#
# Wakeup time: automatically wake up the named service after the
# specified number of seconds. A ? at the end of the wakeup time
# field requests that wake up events be sent only to services that
# are actually being used.  Specify 0 for no wakeup. Presently, only
# the pickup, queue manager and flush daemons need a wakeup timer.
#
# Max procs: the maximum number of processes that may execute this
# service simultaneously. Default is to use a globally configurable
# limit (the default_process_limit configuration parameter in main.cf).
# Specify 0 for no process count limit.
#
# Command + args: the command to be executed. The command name is
# relative to the Postfix program directory (pathname is controlled by
# the daemon_directory configuration variable). Adding one or more
# -v options turns on verbose logging for that service; adding a -D
# option enables symbolic debugging (see the debugger_command variable
# in the main.cf configuration file). See individual command man pages
# for specific command-line options, if any.
#
# General main.cf options can be overridden for specific services.
# To override one or more main.cf options, specify them as arguments
# below, preceding each option by "-o".  There must be no whitespace
# in the option itself (separate multiple values for an option by
# commas).
#
# In order to use the "uucp" message tranport below, set up entries
# in the transport table.
#
# In order to use the "cyrus" message transport below, configure it
# in main.cf as the mailbox_transport.
#
# SPECIFY ONLY PROGRAMS THAT ARE WRITTEN TO RUN AS POSTFIX DAEMONS.
# ALL DAEMONS SPECIFIED HERE MUST SPEAK A POSTFIX-INTERNAL PROTOCOL.
#
# DO NOT SHARE THE POSTFIX QUEUE BETWEEN MULTIPLE POSTFIX INSTANCES.
#
# ==========================================================================
# service type  private unpriv  chroot  wakeup  maxproc command + args
#               (yes)   (yes)   (yes)   (never) (100)
# ==========================================================================
smtp      inet  n       -       n       -       -       smtpd
#628      inet  n       -       n       -       -       qmqpd
pickup    fifo  n       -       n       60      1       pickup
cleanup   unix  n       -       n       -       0       cleanup
qmgr      fifo  n       -       n       300     1       qmgr
#qmgr     fifo  n       -       n       300     1       oqmgr
rewrite   unix  -       -       n       -       -       trivial-rewrite
bounce    unix  -       -       n       -       0       bounce
defer     unix  -       -       n       -       0       bounce
trace     unix  -       -       n       -       0       bounce
verify    unix  -       -       n       -       1       verify
flush     unix  n       -       n       1000?   0       flush
proxymap  unix  -       -       n       -       -       proxymap
smtp      unix  -       -       n       -       -       smtp
relay     unix  -       -       n       -       -       smtp
#       -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq     unix  n       -       n       -       -       showq
error     unix  -       -       n       -       -       error
local     unix  -       n       n       -       -       local
virtual   unix  -       n       n       -       -       virtual
lmtp      unix  -       -       n       -       -       lmtp
anvil     unix  -       -       n       -       1       anvil
#
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# maildrop. See the Postfix MAILDROP_README file for details.
#
maildrop  unix  -       n       n       -       -       pipe
  flags=DRhu user=daemon:mail argv=/usr/bin/maildrop -d ${recipient}
#
# The Cyrus deliver program has changed incompatibly, multiple times.
#
old-cyrus unix  -       n       n       -       -       pipe
  flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user}
# Cyrus 2.1.5 (Amos Gouaux)
# Also specify in main.cf: cyrus_destination_recipient_limit=1
cyrus     unix  -       n       n       -       -       pipe
  user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
uucp      unix  -       n       n       -       -       pipe
  flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail.postfix ($recipient)
ifmail    unix  -       n       n       -       -       pipe
  flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp     unix  -       n       n       -       -       pipe
  flags=Fq. user=foo argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient
tlsmgr    unix  -       -       -       1000?   1       tlsmgr
scache    unix  -       -       -       -       1       scache
discard   unix  -       -       -       -       -       discard
retry     unix  -       -       -       -       -       error

amavis unix - - - - 2 smtp
        -o smtp_data_done_timeout=1200
        -o smtp_send_xforward_command=yes

127.0.0.1:10025 inet n - - - - smtpd
        -o content_filter=
        -o local_recipient_maps=
        -o relay_recipient_maps=
        -o smtpd_restriction_classes=
        -o smtpd_client_restrictions=
        -o smtpd_helo_restrictions=
        -o smtpd_sender_restrictions=
        -o smtpd_recipient_restrictions=permit_mynetworks,reject
        -o mynetworks=127.0.0.0/8
        -o strict_rfc821_envelopes=yes
        -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks
        -o smtpd_bind_address=127.0.0.1
Reply With Quote
  #4  
Old 15th February 2011, 14:21
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,727 Times in 2,565 Posts
Default

Looks ok. Do the MX records of your domains point to the correct server?
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #5  
Old 15th February 2011, 14:52
Ian Wilson Ian Wilson is offline
Junior Member
 
Join Date: Feb 2011
Posts: 19
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Yes the mx point to the mail.domainname.com and the A record for mail points to one of the four ip address assigned to the server
you can see email being delivered in the mail log for the mailboxes that have been set up but the connection is refused, in a similar way to the log in through Squirrelmail not working.

Code:
Feb 12 11:36:57 wsrv1 postfix/smtpd[15122]: D3DE81D801: client=mail-iw0-f175.google.com[209.85.214.175]
Feb 12 11:36:58 wsrv1 postfix/cleanup[15126]: D3DE81D801: message-id=
Feb 12 11:36:58 wsrv1 postfix/qmgr[13911]: D3DE81D801: from=, size=1850, nrcpt=1 (queue active)
Code:
Feb 12 11:36:58 wsrv1 postfix/smtp[15127]: D3DE81D801: to=, relay=127.0.0.1[127.0.0.1]:10024, delay=0.67, delays=0.37/0.01/0/0.29, dsn=2.0.0, status=sent (250 2.0.0 Ok, id=14358-02, from MTA([127.0.0.1]:10025): 250 2.0.0 Ok: queued as 5DA9D1D808)
Feb 12 11:36:58 wsrv1 postfix/qmgr[13911]: D3DE81D801: removed
Code:
Feb 12 11:37:00 wsrv1 postfix/smtp[15135]: 63FA41D80C: to=, relay=ASPMX2.GOOGLEMAIL.COM[74.125.43.27]:25, delay=2.2, delays=0/0.01/0.17/2, dsn=2.0.0, status=sent (250 2.0.0 OK 1297510620 rc7si968760bkb.94)
Feb 12 11:37:00 wsrv1 postfix/qmgr[13911]: 63FA41D80C: removed
bounced email message
Code:
his is the mail system at host wsrv1.smallbizwebhosts.co.uk.

I'm sorry to have to inform you that your message could not
be delivered to one or more recipients. It's attached below.

For further assistance, please send mail to postmaster.

If you do so, please include this problem report. You can
delete your own text from the attached returned message.

                  The mail system

<webmaster@specialist-roofing-contractor.co.uk>: user unknown. Command output:
   ERR: authdaemon: s_connect() failed: Permission denied Invalid user
   specified.

Final-Recipient: rfc822; webmaster@specialist-roofing-contractor.co.uk
Original-Recipient: rfc822;webmaster@specialist-roofing-contractor.co.uk
Action: failed
Status: 5.1.1
Diagnostic-Code: x-unix; ERR: authdaemon: s_connect() failed: Permission denied
   Invalid user specified.


---------- Forwarded message ----------
From: Ian Wilson <ian.wilson@smallbusinesswebservices.co.uk>
To: webmaster@specialist-roofing-contractor.co.uk
Date: Sat, 12 Feb 2011 11:36:56 +0000
Subject: test 8
this is test 8

--
Any ideas?
Reply With Quote
  #6  
Old 15th February 2011, 15:45
pititis pititis is offline
Senior Member
 
Join Date: Dec 2010
Location: München
Posts: 364
Thanks: 38
Thanked 90 Times in 68 Posts
Default

Did you set reverse DNS?
Reply With Quote
  #7  
Old 15th February 2011, 16:22
Ian Wilson Ian Wilson is offline
Junior Member
 
Join Date: Feb 2011
Posts: 19
Thanks: 0
Thanked 0 Times in 0 Posts
Default

the reverse DNS is set by the hosting company for all of the IP addresses the server
eg.
Code:
88.232.208.88.in-adda.arpa          name= server88-208-232-88.live-servers.net
Reply With Quote
  #8  
Old 15th February 2011, 16:34
pititis pititis is offline
Senior Member
 
Join Date: Dec 2010
Location: München
Posts: 364
Thanks: 38
Thanked 90 Times in 68 Posts
Default

It is wrong. Must point to your domain
Reply With Quote
  #9  
Old 15th February 2011, 16:48
Ian Wilson Ian Wilson is offline
Junior Member
 
Join Date: Feb 2011
Posts: 19
Thanks: 0
Thanked 0 Times in 0 Posts
Default

will try that
Reply With Quote
  #10  
Old 15th February 2011, 17:05
mike_p mike_p is offline
Senior Member
 
Join Date: Mar 2010
Location: Surrey, England
Posts: 140
Thanks: 9
Thanked 28 Times in 17 Posts
 
Default

Quote:
Originally Posted by pititis View Post
It is wrong. Must point to your domain
I hope that's not true or everyone on a shared IP is going to have a lot of problems!

@Ian Wilson: Just on the offchance, I had a similar problem and eventually found that I had both dovecot and courier installed. By uninstalling courier, I got things working again. (The server came with courier pre-installed)
Reply With Quote
Reply

Bookmarks

Tags
authorization, email login, ispconfig 3

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Virtual Users And Domains With Postfix, Courier, MySQL And SquirrelMail (Ubuntu 9.10) keyslapper HOWTO-Related Questions 4 20th April 2010 15:46
How to make squirrelmail to talk to courier on different machine linuxlover HOWTO-Related Questions 19 19th March 2010 20:57
ISPConfig3 Debian5 Postfix Courier mail not working danstinebaugh Server Operation 1 5th May 2009 19:00
Virtual Users And Domains With Postfix, Courier, MySQL And SquirrelMail laserdot HOWTO-Related Questions 3 18th October 2008 05:14
Getting 'UNSOLICITED BULK EMAIL' using Squirrelmail spaceuser HOWTO-Related Questions 4 14th June 2008 21:54


All times are GMT +2. The time now is 13:39.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.