VMWare server. No vmnet2 & vmnet3

[Camomille]

Hello,

I have successfully installed VMWare server on Ubuntu 10.04. There are 3 network interfaces on my machine but I can only use one in VMWare. No more vmnet2 or vmnet3 even tough they were correctly configurated during VMW install !

I don't remember how I did it but this machine have been running fine using all 3 networks untill I had to reinstall.

I'm trying to solve this for 3 days now.I've been installing and reinstalling VMW lots of times following different tutos and even went back to Ubuntu 9.04 without success tonight !! I'll really appreciate your help
Great thanks in advance

Greetings to all.

Camomiile

eth0      Link encap:Ethernet  HWaddr 00:18:f3:43:9b:87
          inet addr:192.168.1.61  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::218:f3ff:fe43:9b87/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:43 errors:0 dropped:0 overruns:0 frame:0
          TX packets:57 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:5703 (5.7 KB)  TX bytes:8961 (8.9 KB)
          Interrupt:249 Base address:0xe000

eth1      Link encap:Ethernet  HWaddr 00:17:9a:c1:a5:d5
          inet addr:192.168.34.101  Bcast:192.168.34.255  Mask:255.255.255.0
          inet6 addr: fe80::217:9aff:fec1:a5d5/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2 errors:0 dropped:0 overruns:0 frame:0
          TX packets:22 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:1188 (1.1 KB)  TX bytes:4353 (4.3 KB)
          Interrupt:22

eth2      Link encap:Ethernet  HWaddr 00:21:91:90:b3:1d
          inet addr:192.168.33.11  Bcast:192.168.33.255  Mask:255.255.255.0
          inet6 addr: fe80::221:91ff:fe90:b31d/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:35 errors:0 dropped:0 overruns:0 frame:0
          TX packets:73 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:5008 (5.0 KB)  TX bytes:8527 (8.5 KB)
          Interrupt:23

eth3      Link encap:Ethernet  HWaddr 00:23:7d:fd:26:ba
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Memory:fe9e0000-fea00000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:26 errors:0 dropped:0 overruns:0 frame:0
          TX packets:26 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:3054 (3.0 KB)  TX bytes:3054 (3.0 KB)

vmnet1    Link encap:Ethernet  HWaddr 00:50:56:c0:00:01
          inet addr:192.168.88.1  Bcast:192.168.88.255  Mask:255.255.255.0
          inet6 addr: fe80::250:56ff:fec0:1/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:27 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

vmnet8    Link encap:Ethernet  HWaddr 00:50:56:c0:00:08
          inet addr:192.168.23.1  Bcast:192.168.23.255  Mask:255.255.255.0
          inet6 addr: fe80::250:56ff:fec0:8/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

[falko]

If I remember correctly, I've never had vmnet2 and vmnet3 interfaces in any VMware Server installation - only vmnet1 and vmnet8, so I don't think there's anything wrong with your installation.