Go Back   HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials > ISPConfig 2 > Installation/Configuration

Do you like HowtoForge? Please consider supporting us by becoming a subscriber.
Reply
 
Thread Tools Display Modes
  #1  
Old 11th October 2010, 19:23
Check Check is offline
Member
 
Join Date: Feb 2007
Posts: 76
Thanks: 4
Thanked 1 Time in 1 Post
Default Upgrade errors from 2.2.35 to 2.2.37

I know 37 requires more packages then 35 did, I did perform the recommended commands to install the 2 required packages, though im not great with ubuntu so maybe it didnt work. Can anyone help with the log below? Basically the install failed after it couldnt install SpamAssassin:

Code:
make[2]: Leaving directory `/home/thorst/install_ispconfig/compile_aps/clamav-0.96.1/clamav-milter'
make[1]: Leaving directory `/home/thorst/install_ispconfig/compile_aps/clamav-0.96.1/clamav-milter'
Making install in test
make[1]: Entering directory `/home/thorst/install_ispconfig/compile_aps/clamav-0.96.1/test'
make[2]: Entering directory `/home/thorst/install_ispconfig/compile_aps/clamav-0.96.1/test'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/thorst/install_ispconfig/compile_aps/clamav-0.96.1/test'
make[1]: Leaving directory `/home/thorst/install_ispconfig/compile_aps/clamav-0.96.1/test'
Making install in unit_tests
make[1]: Entering directory `/home/thorst/install_ispconfig/compile_aps/clamav-0.96.1/unit_tests'
make[2]: Entering directory `/home/thorst/install_ispconfig/compile_aps/clamav-0.96.1/unit_tests'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/thorst/install_ispconfig/compile_aps/clamav-0.96.1/unit_tests'
make[1]: Leaving directory `/home/thorst/install_ispconfig/compile_aps/clamav-0.96.1/unit_tests'
Making install in clamdtop
make[1]: Entering directory `/home/thorst/install_ispconfig/compile_aps/clamav-0.96.1/clamdtop'
make[2]: Entering directory `/home/thorst/install_ispconfig/compile_aps/clamav-0.96.1/clamdtop'
test -z "/home/admispconfig/ispconfig/tools/clamav/bin" || /bin/mkdir -p "/home/admispconfig/ispconfig/tools/clamav/bin"
test -z "/home/admispconfig/ispconfig/tools/clamav/share/man/man1" || /bin/mkdir -p "/home/admispconfig/ispconfig/tools/clamav/share/man/man1"
make[2]: Leaving directory `/home/thorst/install_ispconfig/compile_aps/clamav-0.96.1/clamdtop'
make[1]: Leaving directory `/home/thorst/install_ispconfig/compile_aps/clamav-0.96.1/clamdtop'
Making install in clambc
make[1]: Entering directory `/home/thorst/install_ispconfig/compile_aps/clamav-0.96.1/clambc'
make[2]: Entering directory `/home/thorst/install_ispconfig/compile_aps/clamav-0.96.1/clambc'
test -z "/home/admispconfig/ispconfig/tools/clamav/bin" || /bin/mkdir -p "/home/admispconfig/ispconfig/tools/clamav/bin"
  /bin/sh ../libtool   --mode=install /usr/bin/install -c clambc '/home/admispconfig/ispconfig/tools/clamav/bin'
libtool: install: /usr/bin/install -c .libs/clambc /home/admispconfig/ispconfig/tools/clamav/bin/clambc
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/thorst/install_ispconfig/compile_aps/clamav-0.96.1/clambc'
make[1]: Leaving directory `/home/thorst/install_ispconfig/compile_aps/clamav-0.96.1/clambc'
make[1]: Entering directory `/home/thorst/install_ispconfig/compile_aps/clamav-0.96.1'
make[2]: Entering directory `/home/thorst/install_ispconfig/compile_aps/clamav-0.96.1'
test -z "/home/admispconfig/ispconfig/tools/clamav/bin" || /bin/mkdir -p "/home/admispconfig/ispconfig/tools/clamav/bin"
 /usr/bin/install -c clamav-config '/home/admispconfig/ispconfig/tools/clamav/bin'
test -z "/home/admispconfig/ispconfig/tools/clamav/lib/pkgconfig" || /bin/mkdir -p "/home/admispconfig/ispconfig/tools/clamav/lib/pkgconfig"
 /usr/bin/install -c -m 644 libclamav.pc '/home/admispconfig/ispconfig/tools/clamav/lib/pkgconfig'
make[2]: Leaving directory `/home/thorst/install_ispconfig/compile_aps/clamav-0.96.1'
make[1]: Leaving directory `/home/thorst/install_ispconfig/compile_aps/clamav-0.96.1'
checking for rm... /bin/rm
checking for cat... /bin/cat
checking for sed... /bin/sed
checking for echo... /bin/echo
checking for formail... /usr/bin/formail
checking for mktemp... /bin/mktemp
checking for sigtool... /home/admispconfig/ispconfig/tools/clamav/bin/sigtool
checking for clamscan... /home/admispconfig/ispconfig/tools/clamav/bin/clamscan
checking for clamdscan... /home/admispconfig/ispconfig/tools/clamav/bin/clamdscan
checking for /tmp/clamd... no
configure: ClamAV version 0.96.1-broken-compiler detected.
configure: Using scanner /home/admispconfig/ispconfig/tools/clamav/bin/clamscan
configure: Using scanner options --no-summary --stdout
configure: Using virus signature file dir /home/admispconfig/ispconfig/tools/clamav/share/clamav
configure: Signature version reporting is off.
configure: Scanner name adding is on.
configure: Using temporary directory /tmp
configure: Subject header rewriting is off.
configure: creating ./config.status
config.status: creating clamassassin
config.status: creating Makefile
cp -f clamassassin /home/admispconfig/ispconfig/tools/clamav/bin
chmod 555 /home/admispconfig/ispconfig/tools/clamav/bin/clamassassin
What email address or URL should be used in the suspected-spam report
text for users who want more information on your filter installation?
(In particular, ISPs should change this to a local Postmaster contact)
default text: [the administrator of that system]
NOTE: settings for "make test" are now controlled using "t/config.dist".
See that file if you wish to customise what tests are run, and how.

checking module dependencies and their versions...

***************************************************************************
ERROR: the required NetAddr::IP module is installed (3.14),
but is below the minimum required version 4.000,
some functionality will not be available.

  Used in determining which DNS tests are to be done for each of
  the header's received fields, and used by AWL plugin for extracting network
  address from an IPv6 addresses (and from IPv4 address on nondefault mask).


***************************************************************************
NOTE: the optional Digest::SHA module is not installed.

  The Digest::SHA module is required by the DKIM plugin.


***************************************************************************
NOTE: the optional Mail::SPF module is not installed.

  Used to check DNS Sender Policy Framework (SPF) records to fight email
  address forgery and make it easier to identify spams.


***************************************************************************
NOTE: the optional IP::Country module is not installed.

  Used by the RelayCountry plugin (not enabled by default) to determine
  the domain country codes of each relay in the path of an email.


***************************************************************************
NOTE: the optional Razor2 module is not installed,
minimum required version is 2.61.

  Used to check message signatures against Vipul's Razor collaborative
  filtering network. Razor has a large number of dependencies on CPAN
  modules. Feel free to skip installing it, if this makes you nervous;
  SpamAssassin will still work well without it.

  More info on installing and using Razor can be found
  at http://wiki.apache.org/spamassassin/InstallingRazor .


***************************************************************************
NOTE: the optional Net::Ident module is not installed.

  If you plan to use the --auth-ident option to spamd, you will need
  to install this module.


***************************************************************************
NOTE: the optional IO::Socket::INET6 module is not installed.

  This is required if the first nameserver listed in your IP
  configuration or /etc/resolv.conf file is available only via an
  IPv6 address. Also used by a DCC plugin to access dccifd over network.


***************************************************************************
NOTE: the optional IO::Socket::SSL module is not installed.

  If you wish to use SSL encryption to communicate between spamc and
  spamd (the --ssl option to spamd), you need to install this
  module. (You will need the OpenSSL libraries and use the
  ENABLE_SSL="yes" argument to Makefile.PL to build and run an SSL
  compatibile spamc.)


***************************************************************************
NOTE: the optional Mail::DKIM module is not installed,
minimum required version is 0.31, recommended version is 0.37 or higher.

  If this module is installed and the DKIM plugin is enabled,
  SpamAssassin will perform DKIM signature verification when DKIM-Signature
  header fields are present in the message headers, and check ADSP rules
  (e.g. anti-phishing) when a mail message does not contain a valid author
  domain signature. Version 0.37 or later is needed to fully support ADSP.


***************************************************************************
NOTE: the optional LWP::UserAgent module is not installed.

  The "sa-update" program requires this module to make HTTP requests.


***************************************************************************
NOTE: the optional HTTP::Date module is not installed.

  The "sa-update" program requires this module to make HTTP
  If-Modified-Since GET requests.


***************************************************************************
NOTE: the optional Encode::Detect module is not installed.

  If you plan to use the normalize_charset config setting to detect
  charsets and convert them into Unicode, you will need to install
  this module.

REQUIRED module out of date: NetAddr::IP
optional module missing: Digest::SHA
optional module missing: Mail::SPF
optional module missing: IP::Country
optional module missing: Razor2
optional module missing: Net::Ident
optional module missing: IO::Socket::INET6
optional module missing: IO::Socket::SSL
optional module missing: Mail::DKIM
optional module missing: LWP::UserAgent
optional module missing: HTTP::Date
optional module missing: Encode::Detect

warning: some functionality may not be available,
please read the above report before continuing!

make: *** No targets specified and no makefile found.  Stop.
ERROR: Could not make SpamAssassin
Thanks,
Reply With Quote
Sponsored Links
  #2  
Old 11th October 2010, 19:46
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 36,413
Thanks: 834
Thanked 5,498 Times in 4,328 Posts
Default

The NetAddr::IP module provided by the ubuntu version that you have installed on your system is too old for the current spamassassin. To fix that, plaese follow the instructions that are described in this post (for debian, which should work for ubuntu too):

http://www.howtoforge.com/forums/sho...25&postcount=4

Before you try to do the update again, please run this command:

mkdir /root/ispconfig

to ensure that the updater recognizes the installed ispconfig and performs a update and not a install.
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
  #3  
Old 11th October 2010, 20:45
Check Check is offline
Member
 
Join Date: Feb 2007
Posts: 76
Thanks: 4
Thanked 1 Time in 1 Post
 
Default

That did the trick, Thanks for your continued support.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Upgrade from 2.2.29/2.2.27 to current 2.2.37 jbravo Installation/Configuration 6 9th February 2011 15:18
upgrade to 2.2.37, but php still 5.1.6 Sam2k Installation/Configuration 3 8th October 2010 12:44
error after upgrade to 2.2.35 bernholdt General 2 25th March 2010 09:32
Fedora 10 - Virtual Users And Domains With Postfix, Courier etc j.smith1981 Server Operation 6 17th February 2010 01:01
Errors with apt-get update apt-get upgrade Hans Installation/Configuration 2 31st March 2006 11:28


All times are GMT +2. The time now is 12:33.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.