Go Back   HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials > ISPConfig 3 > Tips/Tricks/Mods

Do you like HowtoForge? Please consider supporting us by becoming a subscriber.
Reply
 
Thread Tools Display Modes
  #1  
Old 10th July 2010, 06:09
MrCompTech MrCompTech is offline
Member
 
Join Date: Jul 2010
Posts: 92
Thanks: 1
Thanked 20 Times in 9 Posts
 
Default Companion Script #1 for The Perfect Server - Fedora 13 x86_64 [ISPConfig 3]"

Name of Script "PerfectServer.1.sh"

#!/bin/bash

clear
# ================================================== ==================
echo "The Perfect Server - Fedora 13 x86_64 [ISPConfig3]"
echo "Script=PerfectServer.1.sh"
echo "http://www.howtoforge.org/perfect-server-fedora-13-x86_64-ispconfig3"
echo " "
echo "This set of scripts will help you step through the 'How To Forge'"
echo "how-to 'The Perfect Server - Fedora 13 x86_64 [ISPConfig3]'"
echo " "
echo "You can exit the script at many different points but no provision has"
echo "been made to jump back into the script at any particular place and"
echo "doing so may have unexpected results. {Ctrl}{c} will also end the"
echo "script."
echo " "
echo "This script makes the assupmtion that when you are following the"
echo "beginning portion of the how-to on installing software that"
echo "during step 3 on page:"
echo "http://www.howtoforge.com/perfect-server-fedora-13-x86_64-ispconfig-3-p2"
echo "you UN-SELECT the 'DNS Name Server' in the servers section so that"
echo "bind-chroot does NOT get installed. BIND will be installed in step"
echo "17 on page:"
echo "http://www.howtoforge.com/perfect-server-fedora-13-x86_64-ispconfig-3-p5"
echo "of the how-to."
echo " "
read -p "Press any key to continue." answer
# ================================================== ==================
clear
echo "To make editing easier you may want to use multiple terminal sessions."
echo "You can access another terminal session by pressing {Alt}{F2} on your"
echo "keyboard. Then just login as root again."
echo " "
echo "To switch back to this terminal screen press {Alt}{F1}."
echo "Using this technique you can switch back and forth between a screen"
echo "that displays information on the changes that you need to make and"
echo "screen you are using to make the changes."
echo " "
echo "The commands used to make changes will be displayed as part of"
echo "the script operation in case you want to use another terminal"
echo "session to make changes."
echo " "
read -p "Press any key to continue." answer
# ================================================== ==================
clear
echo "Here is a tip if you need to transfer files to your ISPConfig3"
echo "server. The default in stall includes an ftp client for help"
echo "just type 'man ftp' you can also use wget."
echo " "
echo "You can also transfer files using a USB flash drive. After putting"
echo "the flash drive in your server and waiting a couple of seconds enter"
echo "the command 'fdisk -l'. The device to mount will be displayed."
echo " "
echo "Example: /dev/sdb1"
echo " "
echo "To be able to use this drive you need to mount it. Assuming the "
echo "directory /mnt already exists run the command 'mount /dev/sdb1 /mnt"
echo "Then you can cd to /mnt to access the files. Before removing the"
echo "drive you need to unmount it using the command: umount /mnt"
echo " "
echo "If you need to lookup info on the net you can use the text-only web"
echo "browser elinks."
echo " "
read -p "Press any key to continue" answer
# ================================================== ==================
clear
echo "This script starts in the how-to pg 2 where you are instructed to"
echo "'check if the installer got your IP address right.'"
echo " "
echo "During the runing of the script(s) when asked if you are ready to"
echo "continue or proceed and you answer n/N the script operation will be"
echo "aborted/stopped."
echo " "
echo "Standard disclaimer stuff -"
echo "Use this script(s) at your own risk and by doing so you assume:"
echo "any and all responsibility for any and all consequences."
echo " "
echo "This script is courtesy of mrcomptech at yahoo dot com"
echo " "
read -p "Press any key to continue" answer
# ================================================== ==================

clear
echo "************************************************* *********************"
echo "*** STEP 3A - Check if the installer got your IP address right"
echo "************************************************* *********************"
echo " "
echo "After pressing {enter} the command 'ifconfig | more' will be run to"
echo "display your IP address(es). If you need to change your IP address"
echo "Respond with n/N to run 'system-config-network' to make changes."
echo " "
read -p "Press any key to view ifconfig output" answer
ifconfig | more
answer=""
while [ -z $answer ]
do
read -p "Is your IP address correct? (yY/nN)" answer
case $answer in
y|Y) echo "IP address is correct, so going to continue on ...";;
n|N) system-config-network;;
*) answer="";;
esac
done

clear
echo "************************************************* *********************"
echo "*** STEP 3B - Disable Fedora's Network Manager."
echo "************************************************* *********************"
echo " "
echo "After pressing {enter} the command 'chkconfig NetworkManager off' will be"
echo "run to disable Fedora's Network Manager."
echo " "
read -p "Press any key to disable NetworkManager." answer
chkconfig NetworkManager off
answer=""
while [ -z $answer ]
do
read -p "The Network Manger has been disabled, ready to proceed? (yY/nN)" answer
case $answer in
y|Y) echo "Network Manger has been disabled, continue on ...";;
n|N) exit;;
*) answer="";;
esac
done

clear
echo "************************************************* *********************"
echo "*** STEP 3C - Enable 'normal' networking"
echo "************************************************* *********************"
echo " "
echo "After pressing {enter} the command 'chkconfig --levels 35 network on' will be"
echo "run to enable 'normal' networking."
echo " "
read -p "Press any key to enable normal networking." answer
chkconfig --levels 35 network on
answer=""
while [ -z $answer ]
do
read -p "Normal networking has been enabled, ready to proceed? (yY/nN)" answer
case $answer in
y|Y) echo "Network Manger has been disabled, continue on ...";;
n|N) exit;;
*) answer="";;
esac
done

clear
echo "************************************************* *********************"
echo "*** STEP 3D - Restart networking"
echo "************************************************* *********************"
echo " "
echo "After pressing {enter} the command '/etc/init.d/network restart' will be"
echo "run to restart networking."
echo " "
read -p "Press any key to restart networking." answer
/etc/init.d/network restart
answer=""
while [ -z $answer ]
do
read -p "Networking has been restarted, ready to proceed? (yY/nN)" answer
case $answer in
y|Y) echo "Network Manger has been disabled, continue on ...";;
n|N) exit;;
*) answer="";;
esac
done

clear
echo "************************************************* *********************"
echo "*** STEP 3E - Check if your name servers are correct"
echo "************************************************* *********************"
echo " "
echo "After pressing {enter} the command 'cat /etc/resolv.conf | more' will be"
echo "run to display your name servers. If you need to change your name"
echo "servers respond with n/N to run 'system-config-network' to make changes."
echo " "
read -p "Press any key to view your name servers." answer
cat /etc/resolv.conf
answer=""
while [ -z $answer ]
do
read -p "Are your name servers correct? (yY/nN)" answer
case $answer in
y|Y) echo "Name servers are correct, continue on ...";;
n|N) system-config-network;;
*) answer="";;
esac
done

clear
echo "************************************************* *********************"
echo "*** STEP 4 - Adjust the /etc/hosts file"
echo "************************************************* *********************"
echo " "
echo "After pressing {enter} the command 'cat /etc/hosts | more' will be"
echo "run to display your /etc/hosts file."
echo " "
echo "You will need to make changes:"
echo "Remove the entry for the server name from the 127.0.0.1 line"
echo "Then add a line for the server"
echo " "
echo "Example:"
echo "127.0.0.1 localhost.localdomain localhost"
echo "192.168.0.100 server1.example.com server1"
echo "::1 localhost localhost.localdomain localhost6 localhost6.localdomain6"
echo " "
read -p "Press any key to view your /etc/hosts file." answer
cat /etc/hosts | more
answer=""
while [ -z $answer ]
do
read -p "Is your /etc/hosts file correct? (yY/nN)" answer
case $answer in
y|Y) echo "/etc/hosts file is correct, continue on ...";;
n|N) vim /etc/hosts;;
*) answer="";;
esac
done

clear
echo "************************************************* *********************"
echo "*** STEP 5 Configure the firewall"
echo "************************************************* *********************"
echo " "
echo "If you have followed the recommended settings in the How-To"
echo "then you have already disabled the firewall."
echo "If you have not disabled the firewall answer n/N to the next question"
echo "and the system-config-firewall utility will start so that you can"
echo "disable the firewall, which is the recommended setting since"
echo "since ISPConfig3 will install it's own firewall."
echo " "
answer=""
while [ -z $answer ]
do
read -p "Have you you disabled the linux firewall? (yY/nN)" answer
case $answer in
y|Y) echo "Firewall is disabled, continue on ...";;
n|N) system-config-firewall;;
*) answer="";;
esac
done

clear
echo "************************************************* *********************"
echo "*** STEP 5 Check to see that the firewall has been disabled"
echo "************************************************* *********************"
echo " "
echo "After pressing {enter} the command 'iptables -l' will be"
echo "run to display the firewall rules."
echo " "
echo "Your iptables should look like this:"
echo "================================================= ==="
echo "Chain INPUT (policy ACCEPT)"
echo "target prot opt source destination"
echo " "
echo "Chain FORWARD (policy ACCEPT)"
echo "target prot opt source destination"
echo " "
echo "Chain OUTPUT (policy ACCEPT)"
echo "target prot opt source destination"
echo "================================================= ==="
echo " "
read -p "Press any key to view your firewall rules." answer
iptables -L
echo " "
answer=""
while [ -z $answer ]
do
read -p "Are you ready to continue? (yY/nN)" answer
case $answer in
y|Y) echo "Ready to continue on ...";;
n|N) exit;;
*) answer="";;
esac
done

clear
echo "************************************************* *********************"
echo "*** 6 Disable SELinux"
echo "************************************************* *********************"
echo " "
echo "After pressing {enter} the command 'cat /etc/selinux/config | more'"
echo "will be run to display the /etc/selinux/config file."
echo " "
echo "Edit /etc/selinux/config and set SELINUX=disabled:"
echo " "
read -p "Press any key to view the /etc/selinux/config file." answer
cat /etc/selinux/config | more
echo " "
answer=""
while [ -z $answer ]
do
read -p "Have you you disabled selinux? (yY/nN)" answer
case $answer in
y|Y) echo "SELinux is disabled, continue on ...";;
n|N) vim /etc/selinux/config;;
*) answer="";;
esac
done

clear
clear
echo "************************************************* *********************"
echo "*** Step 6 SELinux is now disabled a restart is required."
echo "************************************************* *********************"
echo " "
echo "Since SELinux is now disabled a restart is required."
echo " "
answer=""
while [ -z $answer ]
do
read -p "Are you ready to restart your system? (yY/nN)" answer
case $answer in
y|Y) reboot;;
n|N) echo "Exiting script - don't forget to restart your system";;
*) answer="";;
esac
done
Reply With Quote
The Following 2 Users Say Thank You to MrCompTech For This Useful Post:
falko (10th July 2010), till (10th July 2010)
Sponsored Links
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Statistic not working mzo Installation/Configuration 49 20th April 2011 13:19
Debian 5 Ajax error + network interface always shutting down ev0css Installation/Configuration 3 5th June 2010 13:58
Webmail Relay Error palkat General 17 23rd April 2006 19:12
Email - Ueb-Miau mazhar Installation/Configuration 5 21st December 2005 11:01
The Perfect Setup Suse 9.3 - Postfix problems new_bee05 HOWTO-Related Questions 20 25th November 2005 03:30


All times are GMT +2. The time now is 20:07.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.