Go Back   HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials > ISPConfig 3 > Installation/Configuration

Do you like HowtoForge? Please consider supporting us by becoming a subscriber.
Reply
 
Thread Tools Display Modes
  #1  
Old 27th May 2010, 21:10
kadoudal kadoudal is offline
Junior Member
 
Join Date: May 2010
Posts: 2
Thanks: 1
Thanked 0 Times in 0 Posts
Question installation OK.. but no access to the panel

all installation seems to be ok....
......
Starting Courier POP3 server: pop3d.
Stopping Courier POP3-SSL server: pop3d-ssl.
Starting Courier POP3-SSL server: pop3d-ssl.
Restarting web server: apache2 ... waiting .
Restarting ftp server: Running: /usr/sbin/pure-ftpd-mysql-virtualchroot -l mysql:/etc/pure-ftpd/db/mysql.conf -l pam -E -O clf:/var/log/pure-ftpd/transfer.log -u 1000 -b -H -A -B
Installation completed.
sd-11919:/tmp/ispconfig3_install/install#
....

but when trying to access the panel

http://sd-11919.dedibox.fr:8080/
or using the IP

cannot connect to the server

apache server up and running...... mysql running

did I any small in-between line ?

thanks for your suggestions
Reply With Quote
Sponsored Links
  #2  
Old 27th May 2010, 21:51
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 35,977
Thanks: 825
Thanked 5,369 Times in 4,216 Posts
Default

Which tutorial did you use to install the server?
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
  #3  
Old 27th May 2010, 21:54
fbnewtz fbnewtz is offline
Member
 
Join Date: Apr 2006
Location: Houston
Posts: 43
Thanks: 1
Thanked 2 Times in 2 Posts
Default

Quote:
Originally Posted by kadoudal View Post
all installation seems to be ok....

apache server up and running...... mysql running

did I any small in-between line ?

thanks for your suggestions
If you do a netstat -anp | grep 8080 do you get anything?

Did you configure a firewall or was it possibly already configured? What does iptables --list output? Is port 8080 open and available to connect from outside?
__________________
ServerPronto
Reply With Quote
The Following User Says Thank You to fbnewtz For This Useful Post:
kadoudal (27th May 2010)
  #4  
Old 27th May 2010, 22:12
kadoudal kadoudal is offline
Junior Member
 
Join Date: May 2010
Posts: 2
Thanks: 1
Thanked 0 Times in 0 Posts
Default panel displayed after installation ..

I used : The Perfect Server – Debian Lenny (Debian 5.0) [ISPConfig 3]

I followed all instructions.. (I gave up from Plesk.... )
no indication upon special opening of port 8080

netstat -anp | grep 8080
tcp6 0 0 :::8080 :::* LISTEN 24822/apache2


iptables --list
Chain INPUT (policy ACCEPT)
target prot opt source destination
fail2ban-ssh tcp -- anywhere anywhere multiport dports ssh
ACCEPT all -- anywhere anywhere
REJECT all -- anywhere loopback/8 reject-with icmp-port-unreachable
ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED
ACCEPT tcp -- anywhere anywhere tcp dpt:www
ACCEPT tcp -- anywhere anywhere tcp dpt:https
ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:30000
ACCEPT icmp -- anywhere anywhere icmp echo-request
LOG all -- anywhere anywhere limit: avg 5/min burst 5 LOG level debug prefix `iptables denied: '
REJECT all -- anywhere anywhere reject-with icmp-port-unreachable

Chain FORWARD (policy ACCEPT)
target prot opt source destination
REJECT all -- anywhere anywhere reject-with icmp-port-unreachable

Chain OUTPUT (policy ACCEPT)
target prot opt source destination
ACCEPT all -- anywhere anywhere

Chain fail2ban-ssh (1 references)
target prot opt source destination
RETURN all -- anywhere anywhere

I found the issue : did not open 8080 in iptable , I had only 80 / 443)

Last edited by kadoudal; 27th May 2010 at 22:38. Reason: [SOLVED]
Reply With Quote
  #5  
Old 27th May 2010, 22:24
fbnewtz fbnewtz is offline
Member
 
Join Date: Apr 2006
Location: Houston
Posts: 43
Thanks: 1
Thanked 2 Times in 2 Posts
 
Default

Quote:
Originally Posted by kadoudal View Post
iptables --list
Chain INPUT (policy ACCEPT)
target prot opt source destination
fail2ban-ssh tcp -- anywhere anywhere multiport dports ssh
ACCEPT all -- anywhere anywhere
REJECT all -- anywhere loopback/8 reject-with icmp-port-unreachable
ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED
ACCEPT tcp -- anywhere anywhere tcp dpt:www
ACCEPT tcp -- anywhere anywhere tcp dpt:https
ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:30000
ACCEPT icmp -- anywhere anywhere icmp echo-request
LOG all -- anywhere anywhere limit: avg 5/min burst 5 LOG level debug prefix `iptables denied: '
REJECT all -- anywhere anywhere reject-with icmp-port-unreachable
Well apache is listening on 8080 obviously but it doesn't look like 8080 is open on your firewall. Do you have /etc/Bastille/bastille-firewall.cfg? If so the find the line with:
TCP_PUBLIC_SERVICES=

and make sure to add port 81 in there in the space separated list there.

Save the file and execute /etc/init.d/bastille-firewall restart and see what happens.

If you get in then I would recommend that you go into System > Firewall > Add Firewall record and make sure that all the ports you need to have open are listed in there. Including 8080 obviously. I always add in 587 and 465 for the mail clients and the passive port range for FTP. There are how-tos available on the site that explain how to setup those features as well.
__________________
ServerPronto
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Can all the installation and configuration be automated (Kickstart) gabby Installation/Configuration 0 30th January 2010 19:47
Error during installation on Debian 3, AMD64 processor nikola021 Installation/Configuration 1 6th October 2006 09:16
ISPConfig installation stops harzlmann Installation/Configuration 4 10th May 2006 08:19
Break during installation TobiasTM Installation/Configuration 4 13th April 2006 14:56
Questions in regards to ISP-Server Setup - Ubuntu 5.10 "Breezy Badger" rbrantley HOWTO-Related Questions 16 10th April 2006 18:26


All times are GMT +2. The time now is 06:18.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.