Go Back   HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials > Linux Forums > HOWTO-Related Questions

Do you like HowtoForge? Please consider supporting us by becoming a subscriber.
Reply
 
Thread Tools Display Modes
  #1  
Old 30th December 2009, 22:14
husskii husskii is offline
Member
 
Join Date: Oct 2009
Posts: 63
Thanks: 11
Thanked 1 Time in 1 Post
Default The Perfect Server - Debian Lenny (Debian 5.0) [ISPConfig 3]

HI I just completed the tutorial of the The Perfect Server - Debian Lenny (Debian 5.0) [ISPConfig 3]

and as I always use the howtoforge tutorial with great success this time Im afraid something went wrong somewhere.

I have a 3 problems which I encountered and dnt know how to reslove. Im hoping someone could please assist me with these issues.

my first problem is that with squirrelmail when I try to login it will not except my user or pass as one of them is wrong. Im hoping its just me being a noob and that there is a defualt user/pass which i dnt know. at the moment I have tried my servers root user and pass, also tried my sql user and pass and my normal user and pass, and all three were unsuccessful, am I just totally way off if so, what should I be using for my first login?

I alos encountered a problem whilst trying to openbsb-inetd, I ran the command
Code:
/etc/init.d/openbsd-inetd restart
I recieved the following error,
Code:
restarting internet superserver: inetdNot starting internet supervisor: no serice enable


and I also had a problem running
Code:
quotacheck -avugm
where I recieved an error of
Code:
quotacheck: you kernel probably supports journaled quota but you are not using it, consider switching to journaled quota to avoid running quotacheck after an unclean shutdown.
quotacheck: warning - quotafile //quota.user was probably truncated, cannot save quota settings....
quotacheck: warning - quotafile //quota.group was probably truncated, cannot save quota settings....
quotacheck scanning: /dev/hdb1 [/] done
quoatcheck checked 3679 directories and 35420 files
then the command [ode]quotaon -avug
/dev/hdb1 [/]: group quotas turned on
/dev/hdb1 [/]: user quotas turned on$[/code]

so Im not sure if its all ok or If I still need to do anything to fix
Code:
quotacheck -avugm


Also following the tutorial word for word I installed pureftpd but when trying to connect with filezilla to my actuall server
the login root is accepted but my pass again is wrong and fails to authenticate. isnt it like proftpd where I use the same credentials
that I use on the server?


Help would be greatly appreciated as Im new to linux and am trying to get my server setup so I may get my website started.
Thank you in advance

Last edited by husskii; 30th December 2009 at 22:25.
Reply With Quote
Sponsored Links
  #2  
Old 31st December 2009, 03:09
husskii husskii is offline
Member
 
Join Date: Oct 2009
Posts: 63
Thanks: 11
Thanked 1 Time in 1 Post
Default

Hi Im also having trouble logging into squirrelmail, the error I get is
ERROR: Connection dropped by IMAP server.

I found another post in another forum saying to run this command as there is no automatic creation of your maildir UNTIL you send the new account an email. the Once you send the email, everything should work just fine.

so I tried running the command
Code:
mutt -f imap://localhost/
and it took me to a login screen which I then tried to login as root as it wouldnt except the other user account since it hasnt been created with squirrelmail.
anyways long story short again it will not even recognise my passwd in putty after running that command, so I have no clue on how to login so I can continue to setup..

pls help would be greatly appreciated...
Reply With Quote
  #3  
Old 31st December 2009, 14:27
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,748 Times in 2,579 Posts
Default

Quote:
Originally Posted by husskii View Post
my first problem is that with squirrelmail when I try to login it will not except my user or pass as one of them is wrong. Im hoping its just me being a noob and that there is a defualt user/pass which i dnt know. at the moment I have tried my servers root user and pass, also tried my sql user and pass and my normal user and pass, and all three were unsuccessful, am I just totally way off if so, what should I be using for my first login?
The username is the email address in this case as ISPConfig 3 configures virtual email users.

Quote:
Originally Posted by husskii View Post
I alos encountered a problem whilst trying to openbsb-inetd, I ran the command
Code:
/etc/init.d/openbsd-inetd restart
I recieved the following error,
Code:
restarting internet superserver: inetdNot starting internet supervisor: no serice enable
That's normal - it just means that there's no service left that should be controlled by inetd.

Quote:
Originally Posted by husskii View Post
and I also had a problem running
Code:
quotacheck -avugm
where I recieved an error of
Code:
quotacheck: you kernel probably supports journaled quota but you are not using it, consider switching to journaled quota to avoid running quotacheck after an unclean shutdown.
quotacheck: warning - quotafile //quota.user was probably truncated, cannot save quota settings....
quotacheck: warning - quotafile //quota.group was probably truncated, cannot save quota settings....
quotacheck scanning: /dev/hdb1 [/] done
quoatcheck checked 3679 directories and 35420 files
then the command [ode]quotaon -avug
/dev/hdb1 [/]: group quotas turned on
/dev/hdb1 [/]: user quotas turned on$[/code]

so Im not sure if its all ok or If I still need to do anything to fix
Code:
quotacheck -avugm
That's also normal when you configure quota for the first time.

Quote:
Originally Posted by husskii View Post
Also following the tutorial word for word I installed pureftpd but when trying to connect with filezilla to my actuall server
the login root is accepted but my pass again is wrong and fails to authenticate. isnt it like proftpd where I use the same credentials
that I use on the server?
You must use the username that you configured in ISPConfig 3.
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #4  
Old 1st January 2010, 19:20
husskii husskii is offline
Member
 
Join Date: Oct 2009
Posts: 63
Thanks: 11
Thanked 1 Time in 1 Post
Default

hi falko thanks for getting back to me, I tried setting up an email user in ispconfig but still had problems loging in, other then I managed to get elgg installed but I couldn't get Elgg database setup. I hoping to get Elgg database was installed successfully, but that wouldnt work either. I just received the blue page saying it was unsuccessful or something. I also tried browsing my url remotely from a server not on my network and it would just time out, I thought maybe it was because I used my local ip instead of my router IP, (so stupid I am because Ive already tried this beofre and it stuffed up) but yea I then tried changing
Code:
vi /etc/network/interfaces
and then ran
Code:
/etc/init.d/networking restart
also changed
Code:
vi /etc/hosts
and then ran
Code:
echo server1.example.com > /etc/hostname
/etc/init.d/hostname.sh start
hostname
hostname -f
but now I cant even get to the main page of elgg , ispconfig or squirrel.

I think it has something to do with my apache2 vhost not restarting, Ive tried rebooting the whole server and Ive also tried restarting apache2 and on both occasions I get the following error.
Code:
Restarting web server: apache2apache2: Syntax error on line 281 of /etc/apache2/apache2.conf: Syntax error on line 46 of /etc/apache2/sites-enabled/seedmachines.com.vhost: Expected </VirtualHost> but saw </Directory>
 failed!
mate if u know were Ive stuffed up that would really be great if u could assist me, I have already attempted this setup more then 10x and cant seem to get elgg working properly, I even edited the setting.php files manually but am still messing up, more importantly atm I cant even get ispconfig to lead, which im sure is because of apache2 failing.

btw Im using ispconfig-3.0.1.6 and jailkit-2.10, only because I could get the versions in the tutorial to work, when trying to install them I recieved errors so I had changed to the latest version I could find...

Thanks in advance
Husskii

btw Im not too sure this setup is what I need and am hoping u can advise me what to use. Im trying to build a simple website with a ticket system were my customers can come and view products & make orders from the site. I have a registered domain & now I just need the right setup. the main reason why I chose this setup of ur The Perfect Server - Debian Lenny (Debian 5.0) [ISPConfig 3] setup over ur lamp setup was because I eventually want to start a support forum to go with the site and the fact that I can have web applications to setup the site. ideally what I would like to have is something similar to what hosting sites offer, where u buy a hosting plan and can install apps such as wordpress drupal etc as Ive only been using linux for about 6months now and still have a lot to learn.

I dnt think I need mydns as I have dns setup with the ppls i registered my domain with and apparent I have a customer email with the package too, but I dnt min spirell as i think it gives me more control instead of getting all my mail forwarded from w/e email i have registered with my domain registar

Last edited by husskii; 1st January 2010 at 21:59.
Reply With Quote
  #5  
Old 7th January 2010, 06:59
husskii husskii is offline
Member
 
Join Date: Oct 2009
Posts: 63
Thanks: 11
Thanked 1 Time in 1 Post
Default

Hi guys sorry I know Ive been asking alot of questions over the last few days, but hopefully Im almost done.

Ive decieded to go with ispconfig 2, because of the freedom of the 3party software that can be installed on it.

The only problem with ispconfig 2 is that I can only find the manual on the ispconfig site, which is a little hard to follow, & Im hoping someone might know of a more detailed tutorial for ispconfig 2, something similar to the tutorial in "" The Perfect Server - Debian Lenny (Debian 5.0) [ISPConfig 3]""
or if it was possible to follow the steps for ispconfig in "" The Perfect Server - Debian Lenny (Debian 5.0) [ISPConfig 3]"" just replacing ver 3 for ver 2

thanks again for the help, it more then appreciated....
Reply With Quote
  #6  
Old 8th January 2010, 15:44
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,748 Times in 2,579 Posts
 
Default

http://www.howtoforge.com/perfect-se...nny-ispconfig2
http://www.howtoforge.com/ispconfig-2.x-first-steps
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
ISPConfig3 Mail Warn Errors reason8 General 3 25th November 2009 14:58
The Perfect Server - Debian Lenny ISPConfig 3 - Generell Understanding + Mail Problem medienlounge HOWTO-Related Questions 2 19th June 2009 16:59
The Perfect Server - Debian Lenny (Debian 5.0) [ISPConfig 2] the_idol HOWTO-Related Questions 1 5th April 2009 15:27
Perfect Server: Debian 5.0 ISPConfig2 Quotacheck Error sighkick HOWTO-Related Questions 3 27th February 2009 15:29
The Perfect Setup Suse 9.3 - Postfix problems new_bee05 HOWTO-Related Questions 20 25th November 2005 03:30


All times are GMT +2. The time now is 03:51.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.