Go Back   HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials > Linux Forums > Installation/Configuration

Do you like HowtoForge? Please consider supporting us by becoming a subscriber.
Reply
 
Thread Tools Display Modes
  #1  
Old 5th January 2010, 14:35
bha4vin bha4vin is offline
Junior Member
 
Join Date: Jan 2010
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Angry Installation on Fedora 12 32 Bit Error

i am trying to install ispconfig on Fedora 12 32 bit but it gives following error




================================================== ======
make[2]: Entering directory `/opt/ispconfig/install_ispconfig/compile_aps/apache_1.3.41/src/support'
gcc -c -I../os/unix -I../include -DLINUX=22 -DHAVE_SET_DUMPABLE -DMOD_SSL=208131 -DUSE_HSREGEX -DEAPI `../apaci` htpasswd.c
htpasswd.c:101: error: conflicting types for ‚getline‚
/usr/include/stdio.h:653: note: previous declaration of ‚getline‚ was here
make[2]: *** [htpasswd.o] Error 1
make[2]: Leaving directory `/opt/ispconfig/install_ispconfig/compile_aps/apache_1.3.41/src/support'
make[1]: *** [build-support] Error 1
make[1]: Leaving directory `/opt/ispconfig/install_ispconfig/compile_aps/apache_1.3.41'
make: *** [build] Error 2
ERROR: Could not make Apache
cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/aps.tar.gz': No such file or directory
mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
mv: cannot stat `binaries/cronolog': No such file or directory
mv: cannot stat `binaries/cronosplit': No such file or directory
mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
mv: cannot stat `binaries/zip': No such file or directory
mv: cannot stat `binaries/unzip': No such file or directory
tar: spamassassin.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Exiting with failure status due to previous errors
mv: cannot stat `spamassassin': No such file or directory
tar: uudeview.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Exiting with failure status due to previous errors
mv: cannot stat `uudeview': No such file or directory
tar: clamav.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Exiting with failure status due to previous errors
mv: cannot stat `clamav': No such file or directory
tar: aps.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Exiting with failure status due to previous errors
mv: cannot stat `ispconfig_tmp': No such file or directory
cp: cannot stat `dist.info': No such file or directory
All prerequisites are fulfilled.
Here we go...
chmod: cannot access `./install.php': No such file or directory

./setup2: line 1090: mysql_config: No such file or directory
./setup2: line 1091: httpd: No such file or directory
./setup2: line 1092: httpd2: No such file or directory
./setup2: line 1093: httpd2: No such file or directory
./setup2: line 1103: ip_addresses: No such file or directory
./setup2: line 1105: /root/ispconfig/php/php: No such file or directory
./setup2: line 1106: /root/ispconfig/dist.info: No such file or directory
chmod: cannot access `/home/admispconfig/ispconfig/tools/suphp/usr/bin/php-wrapper': No such file or directory
Restarting some services...
shell-init: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
./setup2: line 1143: [: ==: unary operator expected
./setup2: line 1161: /etc/rc.d/init.d/ispconfig_server: No such file or directory
Congratulations! Your ISPConfig system is now installed. If you had to install quota, please take the steps described in the installation manual. Otherwise your system is now available without reboot.

./setup2: line 1189: cd: /opt/ispconfig/install_ispconfig/compile_aps/../..: No such file or directory


Regards,
bhavin
Reply With Quote
Sponsored Links
  #2  
Old 6th January 2010, 14:24
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: LŁneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,747 Times in 2,578 Posts
Default

Take a look at chapter 16 on http://www.howtoforge.com/perfect-se...ispconfig-2-p5
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #3  
Old 6th January 2010, 14:57
bha4vin bha4vin is offline
Junior Member
 
Join Date: Jan 2010
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Angry

thanks it is working but after some times it gives following error.


===============================

Here we go...


Warning: include(config.inc.php): failed to open stream: No such file or directory in /opt/ispconfig/install_ispconfig/install.php on line 679

Warning: include(): Failed opening 'config.inc.php' for inclusion (include_path='.:') in /opt/ispconfig/install_ispconfig/install.php on line 679

Warning: mysql_connect(): Access denied for user 'root'@'localhost' (using password: NO) in /opt/ispconfig/install_ispconfig/install.php on line 706
Could not connect to db
chmod: cannot access `/home/admispconfig/ispconfig/tools/suphp/usr/bin/php-wrapper': No such file or directory
Restarting some services...
httpd not running, trying to start
./setup2: line 1143: [: ==: unary operator expected
./setup2: line 1161: /etc/rc.d/init.d/ispconfig_server: No such file or directory
Congratulations! Your ISPConfig system is now installed. If you had to install quota, please take the steps described in the installation manual. Otherwise your system is now available without reboot.





Regards,
Bhavin
Reply With Quote
  #4  
Old 7th January 2010, 16:14
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: LŁneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,747 Times in 2,578 Posts
 
Default

What's the output of
Code:
df -h
? Is SELinux disabled?
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
LB1 Not Taking Over Shared IP Using Heartbeat 2.1.3 On FC10 64Bit asyadiqin Installation/Configuration 5 11th February 2009 21:11
Ubuntu 8.04 server edition ISPconfig installation error malinens Installation/Configuration 4 30th July 2008 08:30
installing Perl module GD - ran into problems Ovidiu Installation/Configuration 6 19th September 2006 10:32
Error during installation of certificate NoBullMan Installation/Configuration 4 14th December 2005 16:51
Could not make OpenSSL yontengyatso Installation/Configuration 3 3rd November 2005 11:50


All times are GMT +2. The time now is 02:17.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.