#1  
Old 14th November 2009, 21:19
HiJacker HiJacker is offline
Junior Member
 
Join Date: May 2009
Posts: 22
Thanks: 0
Thanked 0 Times in 0 Posts
Default Courier POP3

Hello guys, I installed ISPconfig more times before, but this time, after i was done with it, pop3 (receiving email) wasnt working, i have no clue where should be the problem.

Here is file /etc/courier/pop3d
Code:
##VERSION: $Id: pop3d.dist.in,v 1.16 2005/07/05 12:42:51 mrsam Exp $
#
# pop3d created from pop3d.dist by sysconftool
#
# Do not alter lines that begin with ##, they are used when upgrading
# this configuration.
#
#  Copyright 1998 - 2004 Double Precision, Inc.  See COPYING for
#  distribution information.
#
#  Courier POP3 daemon configuration
#
##NAME: PIDFILE:0
#

PIDFILE=/var/run/courier/pop3d.pid

##NAME: MAXDAEMONS:0
#
#  Maximum number of POP3 servers started
#

MAXDAEMONS=40

##NAME: MAXPERIP:4
#
#  Maximum number of connections to accept from the same IP address

MAXPERIP=4

##NAME: POP3AUTH:1
#
# To advertise the SASL capability, per RFC 2449, uncomment the POP3AUTH
# variable:
#
# POP3AUTH="LOGIN"
#
# If you have configured the CRAM-MD5, CRAM-SHA1 or CRAM-SHA256, set POP3AUTH
# to something like this:
#
# POP3AUTH="LOGIN CRAM-MD5 CRAM-SHA1"

POP3AUTH=""

##NAME: POP3AUTH_ORIG:1
#
# For use by webadmin

POP3AUTH_ORIG="PLAIN LOGIN CRAM-MD5 CRAM-SHA1 CRAM-SHA256"

##NAME: POP3AUTH_TLS:1
#
# To also advertise SASL PLAIN if SSL is enabled, uncomment the
# POP3AUTH_TLS environment variable:
#
# POP3AUTH_TLS="LOGIN PLAIN"

POP3AUTH_TLS=""

##NAME: POP3AUTH_TLS_ORIG:0
#
# For use by webadmin

POP3AUTH_TLS_ORIG="LOGIN PLAIN"

##NAME: POP3_PROXY:0
#
# Enable proxying.  See README.proxy

POP3_PROXY=0

##NAME: PROXY_HOSTNAME:0
#
# Override value from gethostname() when checking if a proxy connection is
# required.

# PROXY_HOSTNAME=

##NAME: PORT:1
#
# Port to listen on for connections.  The default is port 110.
#
#  Multiple port numbers can be separated by commas.  When multiple port
#  numbers are used it is possibly to select a specific IP address for a
#  given port as "ip.port".  For example, "127.0.0.1.900,192.68.0.1.900"
#  accepts connections on port 900 on IP addresses 127.0.0.1 and 192.68.0.1
#  The ADDRESS setting is a default for ports that do not have a specified
#  IP address.

PORT=110

##NAME: ADDRESS:0
#
# IP address to listen on.  0 means all IP addresses.

ADDRESS=0

##NAME: TCPDOPTS:0
#
# Other couriertcpd(1) options.  The following defaults should be fine.
#

TCPDOPTS="-nodnslookup -noidentlookup"

##NAME: LOGGEROPTS:0
#
# courierlogger(1) options.
#

LOGGEROPTS="-name=pop3d"

##NAME: DEFDOMAIN:0
#
# Optional default domain. If the username does not contain the
# first character of DEFDOMAIN, then it is appended to the username.
# If DEFDOMAIN and DOMAINSEP are both set, then DEFDOMAIN is appended
# only if the username does not contain any character from DOMAINSEP.
# You can set different default domains based on the the interface IP
# address using the -access and -accesslocal options of couriertcpd(1).

#DEFDOMAIN="@example.com"

##NAME: POP3DSTART:0
#
# POP3DSTART is not referenced anywhere in the standard Courier programs
# or scripts.  Rather, this is a convenient flag to be read by your system
# startup script in /etc/rc.d, like this:
#
#  . /etc/courier/pop3d
#  case x$POP3DSTART in
#  x[yY]*)
#        /usr/lib/courier/pop3d.rc start
#        ;;
#  esac
#
# The default setting is going to be NO, until Courier is shipped by default
# with enough platforms so that people get annoyed with having to flip it to
# YES every time.

POP3DSTART=YES

##NAME: MAILDIRPATH:0
#
# MAILDIRPATH - directory name of the maildir directory.
#
MAILDIRPATH=Maildir
/var/log/mail.log
Code:
Nov 14 21:11:26 primary imapd: Connection, ip=[::ffff:91.148.26.137]
Nov 14 21:11:26 primary imapd: LOGIN, user=adam@crew.sk, ip=[::ffff:91.148.26.137], port=[3909], protocol=IMAP
Nov 14 21:11:26 primary imapd: DISCONNECTED, user=adam@crew.sk, ip=[::ffff:91.148.26.137], headers=0, body=0, rcvd=77, sent=409, time=0
Nov 14 21:11:27 primary imapd: Connection, ip=[::ffff:91.148.26.137]
Nov 14 21:11:27 primary imapd: LOGIN, user=adam@crew.sk, ip=[::ffff:91.148.26.137], port=[3911], protocol=IMAP
Nov 14 21:11:27 primary imapd: DISCONNECTED, user=adam@crew.sk, ip=[::ffff:91.148.26.137], headers=0, body=0, rcvd=77, sent=409, time=0
Nov 14 21:12:59 primary postfix/qmgr[1853]: D9B30183E4: from=<tw@ffs.sk>, size=2094, nrcpt=1 (queue active)
Nov 14 21:12:59 primary postfix/qmgr[1853]: 7FC70183E6: from=<adamlucansky@azet.sk>, size=1942, nrcpt=1 (queue active)
Nov 14 21:12:59 primary postfix/qmgr[1853]: 8731A183E5: from=<adam@crew.sk>, size=1804, nrcpt=1 (queue active)
Nov 14 21:12:59 primary maildrop[12031]: Unable to open mailbox.
Nov 14 21:12:59 primary maildrop[12036]: Unable to open mailbox.
Nov 14 21:12:59 primary postfix/pipe[12030]: D9B30183E4: to=<wagner@crew.sk>, relay=maildrop, delay=923, delays=922/0.01/0/0.17, dsn=4.3.0, status=deferred (temporary failure. Command output: /usr/bin/maildrop: Unable to open mailbox. )
Nov 14 21:12:59 primary postfix/pipe[12033]: 7FC70183E6: to=<adam@crew.sk>, relay=maildrop, delay=541, delays=541/0.04/0/0.2, dsn=4.3.0, status=deferred (temporary failure. Command output: /usr/bin/maildrop: Unable to open mailbox. )
Nov 14 21:12:59 primary maildrop[12048]: Unable to open mailbox.
Nov 14 21:12:59 primary postfix/pipe[12030]: 8731A183E5: to=<adam@crew.sk>, relay=maildrop, delay=580, delays=580/0.23/0/0.05, dsn=4.3.0, status=deferred (temporary failure. Command output: /usr/bin/maildrop: Unable to open mailbox. )
Nov 14 21:13:43 primary imapd: Connection, ip=[::ffff:91.148.26.137]
Nov 14 21:13:43 primary imapd: LOGIN, user=adam@crew.sk, ip=[::ffff:91.148.26.137], port=[3920], protocol=IMAP
Nov 14 21:13:43 primary imapd: DISCONNECTED, user=adam@crew.sk, ip=[::ffff:91.148.26.137], headers=0, body=0, rcvd=77, sent=409, time=0
Nov 14 21:13:44 primary imapd: Connection, ip=[::ffff:91.148.26.137]
Nov 14 21:13:44 primary imapd: LOGIN, user=adam@crew.sk, ip=[::ffff:91.148.26.137], port=[3921], protocol=IMAP
Nov 14 21:13:45 primary imapd: LOGOUT, user=adam@crew.sk, ip=[::ffff:91.148.26.137], headers=0, body=0, rcvd=96, sent=500, time=1
Nov 14 21:13:47 primary imapd: Connection, ip=[::ffff:91.148.26.137]
Nov 14 21:13:47 primary imapd: LOGIN, user=adam@crew.sk, ip=[::ffff:91.148.26.137], port=[3922], protocol=IMAP
Nov 14 21:13:47 primary imapd: DISCONNECTED, user=adam@crew.sk, ip=[::ffff:91.148.26.137], headers=0, body=0, rcvd=77, sent=409, time=0
Nov 14 21:13:48 primary imapd: Connection, ip=[::ffff:91.148.26.137]
Nov 14 21:13:48 primary imapd: LOGIN, user=adam@crew.sk, ip=[::ffff:91.148.26.137], port=[3923], protocol=IMAP
Nov 14 21:13:48 primary imapd: DISCONNECTED, user=adam@crew.sk, ip=[::ffff:91.148.26.137], headers=0, body=0, rcvd=77, sent=409, time=0
Nov 14 21:14:33 primary postfix/anvil[11937]: statistics: max connection rate 1/60s for (smtp:213.215.107.141) at Nov 14 21:11:00
Nov 14 21:14:33 primary postfix/anvil[11937]: statistics: max connection count 1 for (smtp:213.215.107.141) at Nov 14 21:11:00
Nov 14 21:14:33 primary postfix/anvil[11937]: statistics: max cache size 2 at Nov 14 21:11:13
Nov 14 21:15:01 primary pop3d: Connection, ip=[::ffff:127.0.0.1]
Nov 14 21:15:01 primary pop3d: Disconnected, ip=[::ffff:127.0.0.1]
Nov 14 21:15:01 primary imapd: Connection, ip=[::ffff:127.0.0.1]
Nov 14 21:15:01 primary imapd: Disconnected, ip=[::ffff:127.0.0.1], time=0
Nov 14 21:15:01 primary postfix/smtpd[12092]: connect from localhost[127.0.0.1]
Nov 14 21:15:01 primary postfix/smtpd[12092]: lost connection after CONNECT from localhost[127.0.0.1]
Nov 14 21:15:01 primary postfix/smtpd[12092]: disconnect from localhost[127.0.0.1]
Nov 14 21:16:01 primary postfix/smtpd[11950]: timeout after END-OF-MESSAGE from localhost[127.0.0.1]
Nov 14 21:16:01 primary postfix/smtpd[11950]: disconnect from localhost[127.0.0.1]
Nov 14 21:16:14 primary postfix/smtpd[11979]: timeout after END-OF-MESSAGE from localhost[127.0.0.1]
Nov 14 21:16:14 primary postfix/smtpd[11979]: disconnect from localhost[127.0.0.1]
Nov 14 21:17:59 primary postfix/qmgr[1853]: 6D1D1183E7: from=<adamlucansky@azet.sk>, size=1950, nrcpt=1 (queue active)
Nov 14 21:17:59 primary postfix/qmgr[1853]: 270AF183E8: from=<adam@crew.sk>, size=1804, nrcpt=1 (queue active)
Nov 14 21:17:59 primary postfix/qmgr[1853]: 9070A183DE: from=<info@forum-warez.info>, size=2941, nrcpt=1 (queue active)
Nov 14 21:17:59 primary maildrop[12139]: Unable to open mailbox.
Nov 14 21:17:59 primary maildrop[12141]: Unable to open mailbox.
Nov 14 21:17:59 primary postfix/pipe[12138]: 6D1D1183E7: to=<adam@crew.sk>, relay=maildrop, delay=418, delays=418/0.03/0/0.2, dsn=4.3.0, status=deferred (temporary failure. Command output: /usr/bin/maildrop: Unable to open mailbox. )
Nov 14 21:17:59 primary postfix/pipe[12140]: 9070A183DE: to=<exidus@crew.sk>, relay=maildrop, delay=8980, delays=8980/0.02/0/0.2, dsn=4.3.0, status=deferred (temporary failure. Command output: /usr/bin/maildrop: Unable to open mailbox. )
Nov 14 21:17:59 primary maildrop[12154]: Unable to open mailbox.
Nov 14 21:17:59 primary postfix/pipe[12138]: 270AF183E8: to=<adam@crew.sk>, relay=maildrop, delay=406, delays=405/0.21/0/0.06, dsn=4.3.0, status=deferred (temporary failure. Command output: /usr/bin/maildrop: Unable to open mailbox. )
In mail-client, it says like fine, but when i send email from ouside to mailbox, email just disappear. Any ideas please ? Its urgent
Reply With Quote
Sponsored Links
  #2  
Old 14th November 2009, 21:26
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 36,381
Thanks: 833
Thanked 5,484 Times in 4,316 Posts
Default

Thats not a courier problem. The mailbox does not exist or it has wrong permissions.

Please check if the jobqueue in the ispconfig monitor is empty or if there are any errors in the ispconfig sys log in the monitor.
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
  #3  
Old 14th November 2009, 22:43
HiJacker HiJacker is offline
Junior Member
 
Join Date: May 2009
Posts: 22
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Code:
74012183DA 10161 Fri Nov 13 17:39:20 ndr@xxx.com
(temporary failure. Command output: /usr/bin/maildrop: Unable to open mailbox.)
xxx@xxx.eu
So, how can I fix it ? Im sorry about that i titled this thread wrong, i havent got alot of skills with mailboxes etc.
Reply With Quote
  #4  
Old 15th November 2009, 10:37
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 36,381
Thanks: 833
Thanked 5,484 Times in 4,316 Posts
Default

Please answer my questions if we shall be able to help you.

Quote:
Please check if the jobqueue in the ispconfig monitor is empty or if there are any errors in the ispconfig sys log in the monitor.
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
  #5  
Old 15th November 2009, 18:51
HiJacker HiJacker is offline
Junior Member
 
Join Date: May 2009
Posts: 22
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Syslog is empty

I cant fix it whatever i do, how I can i completly reinstall packages releated to mails ? With apt, but total reinstall, including configs etc., because aptitude reinstall just replace sys files, not configs, I want to make it like first time I was installing ISPconfig. Thanks
Reply With Quote
  #6  
Old 16th November 2009, 09:49
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 36,381
Thanks: 833
Thanked 5,484 Times in 4,316 Posts
Default

1) What exactly did you do before this problem started?
2) Post the output of:
ls -la /var/vmail
3) Have you tried to delete the mailbox and maildomain and then recreate it?
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
  #7  
Old 17th November 2009, 12:58
HiJacker HiJacker is offline
Junior Member
 
Join Date: May 2009
Posts: 22
Thanks: 0
Thanked 0 Times in 0 Posts
Default

So, i reinstalled server, after i installed it from revision 1475 , because that one which is in Howtoforge guide doesnt work for me. Everything was fine during installation.

mailq reply :
Code:
-Queue ID- --Size-- ----Arrival Time---- -Sender/Recipient-------
CB486656402      994 Tue Nov 17 12:47:33  www-data@xxxxx.eu
(temporary failure. Command output: /usr/bin/maildrop: Unable to open mailbox.)
                                         adam@xxx.com

-- 1 Kbytes in 1 Request.
ls -la /var/vmail
Code:
total 32
drwxr-xr-x  4 vmail vmail 4096 Nov 17 12:55 .
drwxr-xr-x 15 root  root  4096 Nov 17 12:44 ..
-rw-r--r--  1 vmail vmail  220 Aug 23 19:18 .bash_logout
-rw-r--r--  1 vmail vmail 3187 Aug 23 19:18 .bashrc
-rw-------  1 vmail vmail 1382 Nov 17 12:45 .mailfilter
-rw-r--r--  1 vmail vmail  675 Aug 23 19:18 .profile
drwx------  3 vmail vmail 4096 Nov 17 12:47 mydomain.com
drwxr-xr-x  2 root  root  4096 Nov 17 12:45 mailfilters
Now i got fresh installed from rev 1475 , and I still cant receive emails, i can only send. This looks like bug, not only my problem.

Linux primary.xxxx.eu 2.6.26-2-xen-amd64 #1 SMP Sun Jun 21 08:09:04 UTC 2009 x86_64 GNU/Linux
Reply With Quote
  #8  
Old 17th November 2009, 13:01
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 36,381
Thanks: 833
Thanked 5,484 Times in 4,316 Posts
Default

You installed from SVN. The SVN versions are untested and not for use on productions sytems. The svn versions are for developers only and may contain bugs or even destroy your serve setup.

Please remove this version completely and install ISPConfig 3.0.1.6 which definately does not contain bugs in the mail recceiving area.
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
  #9  
Old 17th November 2009, 13:07
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 36,381
Thanks: 833
Thanked 5,484 Times in 4,316 Posts
Default

Lets try to find out were your server is confuigured wrong. Which exact perfect setup guide did you use to install sipconfig?
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
  #10  
Old 17th November 2009, 13:09
HiJacker HiJacker is offline
Junior Member
 
Join Date: May 2009
Posts: 22
Thanks: 0
Thanked 0 Times in 0 Posts
 
Default

This one http://www.howtoforge.com/perfect-se...nny-ispconfig3

Then which ISPConfig should I install ?
http://downloads.sourceforge.net/isp...g-3.0.1.tar.gz Doesnt work for me, when i start installation, it say that cant get version of system or something like that.

Is there any kind of downgrade or complete reinstall without needed to reinstall Debian?

//EDIT

tried php uninstall.php , done, now ill try that 3.0.1.6

//EDIT2

doesnt work, im going to reinstall server

//EDIT3

when I installed squirrelmail, it said error 500,

Code:
Chyba serveru!

Nastala vnitřní chyba a server nebyl schopen dokončit Vᚠpožadavek.

Chybová zpráva
Premature end of script headers: index.php

Pokud si myslíte, že toto je chyba serveru, kontaktujte, prosím, webmastera.
Error 500
88.212.11.114
Tue Nov 17 13:21:17 2009
Apache/2.2.14 (Debian)

Last edited by HiJacker; 17th November 2009 at 13:21.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Fetchmail retrieval configuration on the clients side perfectpol7 Server Operation 8 19th May 2009 15:26
Courier IMAP / POP3 error when re-creating ssl certificate Debian2009 Server Operation 4 24th April 2009 02:47
Courier POP3 login refusal bahadirtonguc Server Operation 13 18th April 2008 01:38
Slow POP3 with Dovecot and/or Courier makedo Server Operation 9 12th September 2006 16:13
Pb connecting to POP3 via Outlook (Virtual Users And Domains With Postfix, Courier..) Kommius HOWTO-Related Questions 1 30th July 2006 16:48


All times are GMT +2. The time now is 05:56.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.