Boot on suse 11.1 Raid1

[roli]

Hello,

On server with SCSI two disk I have problems with boot server on fresh installation suse 11.1.

When put new installation

I create on sda1 /boot (ext3),
sda2 /swap and
sda3 /RAID (option no formatting),

on sdb1 RAID (option no formatting)and the same location as sda3.

Then create array raid1 on dev/md0 and put sda3 and sdb1 on ext3 /.

Installation goes without errors but at first restart server on booting hung up.
I think there is a problem with Grub bootloader but I don'n know where to start problem.

For interesting works suse 10.3 at this server fine with same configuration as I create on suse 11.1.

Please help me.

Best,
R

[falko]

What's in /boot/grub/men.lst and /etc/fstab?
What's the output of

fdisk -l

?

[roli]

I don't know how to look fdisk-l because it's in the middle of installation when is first boot (when suse install) hung up but I can see this in boot configuration for default grub.

boot/grub/manu.1st

root(hd0,0)
kernel /vmlinuz root=/dev/md0 vga=0x317 resume=dev/sda2 splash=silent showtops
--------------------------------------------------------------------------
/etc/grub.conf

setup -stage2 = /boot/grub/stage2 (hd0,0) (hd0,0)
quit

-----------------------------------------------------------------
filename /grub/device.map

(fd0) /dev/fd0
(hd0) /dev/sda
(hd1) /dev/sdb

Best,
R