Navigation

jmarcus · #1 24th September 2009, 19:52

Hi,
I'm setting up a Postfix server to receive a few 100K emails. We are testing the load for bulk registration. I have been hacking around postfix for a few hours now and I really just need to be able to POP off of two accounts. I don't need anything fancy, this server is going to be around for a week.

My Postfix main.cf

Code:

[root@mx3 dovecot]# postconf
2bounce_notice_recipient = postmaster
access_map_reject_code = 554
address_verify_default_transport = $default_transport
address_verify_local_transport = $local_transport
address_verify_map = 
address_verify_negative_cache = yes
address_verify_negative_expire_time = 3d
address_verify_negative_refresh_time = 3h
address_verify_poll_count = 3
address_verify_poll_delay = 3s
address_verify_positive_expire_time = 31d
address_verify_positive_refresh_time = 7d
address_verify_relay_transport = $relay_transport
address_verify_relayhost = $relayhost
address_verify_sender = postmaster
address_verify_sender_dependent_relayhost_maps = $sender_dependent_relayhost_maps
address_verify_service_name = verify
address_verify_transport_maps = $transport_maps
address_verify_virtual_transport = $virtual_transport
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
allow_mail_to_commands = alias, forward
allow_mail_to_files = alias, forward
allow_min_user = no
allow_percent_hack = yes
allow_untrusted_routing = no
alternate_config_directories = 
always_bcc = 
anvil_rate_time_unit = 60s
anvil_status_update_time = 600s
append_at_myorigin = yes
append_dot_mydomain = yes
application_event_drain_time = 100s
authorized_flush_users = static:anyone
authorized_mailq_users = static:anyone
authorized_submit_users = static:anyone
backwards_bounce_logfile_compatibility = yes
berkeley_db_create_buffer_size = 16777216
berkeley_db_read_buffer_size = 131072
best_mx_transport = 
biff = yes
body_checks = 
body_checks_size_limit = 51200
bounce_notice_recipient = postmaster
bounce_queue_lifetime = 5d
bounce_service_name = bounce
bounce_size_limit = 50000
bounce_template_file = 
broken_sasl_auth_clients = no
canonical_classes = envelope_sender, envelope_recipient, header_sender, header_recipient
canonical_maps = 
cleanup_service_name = cleanup
command_directory = /usr/sbin
command_execution_directory = 
command_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
command_time_limit = 1000s
config_directory = /etc/postfix
connection_cache_protocol_timeout = 5s
connection_cache_service_name = scache
connection_cache_status_update_time = 600s
connection_cache_ttl_limit = 2s
content_filter = 
daemon_directory = /usr/libexec/postfix
daemon_timeout = 18000s
debug_peer_level = 2
debug_peer_list = 
default_database_type = hash
default_delivery_slot_cost = 5
default_delivery_slot_discount = 50
default_delivery_slot_loan = 3
default_destination_concurrency_limit = 20
default_destination_recipient_limit = 50
default_extra_recipient_limit = 1000
default_minimum_delivery_slots = 3
default_privs = nobody
default_process_limit = 100
default_rbl_reply = $rbl_code Service unavailable; $rbl_class [$rbl_what] blocked using $rbl_domain${rbl_reason?; $rbl_reason}
default_recipient_limit = 10000
default_transport = smtp
default_verp_delimiters = +=
defer_code = 450
defer_service_name = defer
defer_transports = 
delay_logging_resolution_limit = 2
delay_notice_recipient = postmaster
delay_warning_time = 0h
deliver_lock_attempts = 20
deliver_lock_delay = 1s
disable_dns_lookups = no
disable_mime_input_processing = no
disable_mime_output_conversion = no
disable_verp_bounces = no
disable_vrfy_command = no
dont_remove = 0
double_bounce_sender = double-bounce
duplicate_filter_limit = 1000
empty_address_recipient = MAILER-DAEMON
enable_original_recipient = yes
error_notice_recipient = postmaster
error_service_name = error
execution_directory_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
expand_owner_alias = no
export_environment = TZ MAIL_CONFIG LANG
fallback_transport = 
fallback_transport_maps = 
fast_flush_domains = $relay_domains
fast_flush_purge_time = 7d
fast_flush_refresh_time = 12h
fault_injection_code = 0
flush_service_name = flush
fork_attempts = 5
fork_delay = 1s
forward_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
forward_path = $home/.forward${recipient_delimiter}${extension}, $home/.forward
frozen_delivered_to = yes
hash_queue_depth = 1
hash_queue_names = deferred, defer
header_address_token_limit = 10240
header_checks = 
header_size_limit = 102400
helpful_warnings = yes
home_mailbox = Maildir/
hopcount_limit = 50
html_directory = no
ignore_mx_lookup_error = no
import_environment = MAIL_CONFIG MAIL_DEBUG MAIL_LOGTAG TZ XAUTHORITY DISPLAY LANG=C
in_flow_delay = 1s
inet_interfaces = all
inet_protocols = ipv4
initial_destination_concurrency = 5
internal_mail_filter_classes = 
invalid_hostname_reject_code = 501
ipc_idle = 100s
ipc_timeout = 3600s
ipc_ttl = 1000s
line_length_limit = 2048
lmtp_bind_address = 
lmtp_bind_address6 = 
lmtp_cname_overrides_servername = no
lmtp_connect_timeout = 0s
lmtp_connection_cache_destinations = 
lmtp_connection_cache_on_demand = yes
lmtp_connection_cache_time_limit = 2s
lmtp_connection_reuse_time_limit = 300s
lmtp_data_done_timeout = 600s
lmtp_data_init_timeout = 120s
lmtp_data_xfer_timeout = 180s
lmtp_defer_if_no_mx_address_found = no
lmtp_destination_concurrency_limit = $default_destination_concurrency_limit
lmtp_destination_recipient_limit = $default_destination_recipient_limit
lmtp_discard_lhlo_keyword_address_maps = 
lmtp_discard_lhlo_keywords = 
lmtp_enforce_tls = no
lmtp_generic_maps = 
lmtp_host_lookup = dns
lmtp_lhlo_name = $myhostname
lmtp_lhlo_timeout = 300s
lmtp_line_length_limit = 990
lmtp_mail_timeout = 300s
lmtp_mx_address_limit = 5
lmtp_mx_session_limit = 2
lmtp_pix_workaround_delay_time = 10s
lmtp_pix_workaround_threshold_time = 500s
lmtp_quit_timeout = 300s
lmtp_quote_rfc821_envelope = yes
lmtp_randomize_addresses = yes
lmtp_rcpt_timeout = 300s
lmtp_rset_timeout = 20s
lmtp_sasl_auth_enable = no
lmtp_sasl_mechanism_filter = 
lmtp_sasl_password_maps = 
lmtp_sasl_path = 
lmtp_sasl_security_options = noplaintext, noanonymous
lmtp_sasl_tls_security_options = $lmtp_sasl_security_options
lmtp_sasl_tls_verified_security_options = $lmtp_sasl_tls_security_options
lmtp_sasl_type = cyrus
lmtp_send_xforward_command = no
lmtp_sender_dependent_authentication = no
lmtp_skip_5xx_greeting = yes
lmtp_starttls_timeout = 300s
lmtp_tcp_port = 24
lmtp_tls_CAfile = 
lmtp_tls_CApath = 
lmtp_tls_cert_file = 
lmtp_tls_dcert_file = 
lmtp_tls_dkey_file = $lmtp_tls_dcert_file
lmtp_tls_enforce_peername = yes
lmtp_tls_exclude_ciphers = 
lmtp_tls_key_file = $lmtp_tls_cert_file
lmtp_tls_loglevel = 0
lmtp_tls_mandatory_ciphers = medium
lmtp_tls_mandatory_exclude_ciphers = 
lmtp_tls_mandatory_protocols = SSLv3, TLSv1
lmtp_tls_note_starttls_offer = no
lmtp_tls_per_site = 
lmtp_tls_policy_maps = 
lmtp_tls_scert_verifydepth = 5
lmtp_tls_secure_cert_match = nexthop
lmtp_tls_security_level = 
lmtp_tls_session_cache_database = 
lmtp_tls_session_cache_timeout = 3600s
lmtp_tls_verify_cert_match = hostname
lmtp_use_tls = no
lmtp_xforward_timeout = 300s
local_command_shell = 
local_destination_concurrency_limit = 2
local_destination_recipient_limit = 1
local_header_rewrite_clients = permit_inet_interfaces
local_recipient_maps = proxy:unix:passwd.byname $alias_maps
local_transport = local:$myhostname
luser_relay = 
mail_name = Postfix
mail_owner = postfix
mail_release_date = 200600825
mail_spool_directory = /var/mail
mail_version = 2.3.3
mailbox_command = 
mailbox_command_maps = 
mailbox_delivery_lock = fcntl, dotlock
mailbox_size_limit = 51200000
mailbox_transport = 
mailbox_transport_maps = 
mailq_path = /usr/bin/mailq.postfix
manpage_directory = /usr/share/man
maps_rbl_domains = 
maps_rbl_reject_code = 554
masquerade_classes = envelope_sender, header_sender, header_recipient
masquerade_domains = 
masquerade_exceptions = 
max_idle = 100s
max_use = 100
maximal_backoff_time = 4000s
maximal_queue_lifetime = 5d
message_reject_characters = 
message_size_limit = 10240000
message_strip_characters = 
milter_command_timeout = 30s
milter_connect_macros = j {daemon_name} v
milter_connect_timeout = 30s
milter_content_timeout = 300s
milter_data_macros = i
milter_default_action = tempfail
milter_end_of_data_macros = i
milter_helo_macros = {tls_version} {cipher} {cipher_bits} {cert_subject} {cert_issuer}
milter_macro_daemon_name = $myhostname
milter_macro_v = $mail_name $mail_version
milter_mail_macros = i {auth_type} {auth_authen} {auth_author} {mail_addr}
milter_protocol = 2
milter_rcpt_macros = i {rcpt_addr}
milter_unknown_command_macros = 
mime_boundary_length_limit = 2048
mime_header_checks = $header_checks
mime_nesting_limit = 100
minimal_backoff_time = 1000s
multi_recipient_bounce_reject_code = 550
mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain, studentkort.se
mydomain = studentkort.se
myhostname = mx3.studentkort.se
mynetworks = 127.0.0.1/32 10.10.200.100/32 
mynetworks_style = host
myorigin = $mydomain
nested_header_checks = $header_checks
newaliases_path = /usr/bin/newaliases.postfix
non_fqdn_reject_code = 504
non_smtpd_milters = 
notify_classes = resource, software
owner_request_special = yes
parent_domain_matches_subdomains = debug_peer_list,fast_flush_domains,mynetworks,permit_mx_backup_networks,qmqpd_authorized_clients,relay_domains,smtpd_access_maps
permit_mx_backup_networks = 
pickup_service_name = pickup
plaintext_reject_code = 450
prepend_delivered_header = command, file, forward
process_id_directory = pid
propagate_unmatched_extensions = canonical, virtual
proxy_interfaces = 
proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks
qmgr_clog_warn_time = 300s
qmgr_fudge_factor = 100
qmgr_message_active_limit = 20000
qmgr_message_recipient_limit = 20000
qmgr_message_recipient_minimum = 10
qmqpd_authorized_clients = 
qmqpd_error_delay = 1s
qmqpd_timeout = 300s
queue_directory = /var/spool/postfix
queue_file_attribute_count_limit = 100
queue_minfree = 0
queue_run_delay = 1000s
queue_service_name = qmgr
rbl_reply_maps = 
readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES
receive_override_options = 
recipient_bcc_maps = 
recipient_canonical_classes = envelope_recipient, header_recipient
recipient_canonical_maps = 
recipient_delimiter = 
reject_code = 554
relay_clientcerts = 
relay_destination_concurrency_limit = $default_destination_concurrency_limit
relay_destination_recipient_limit = $default_destination_recipient_limit
relay_domains = $mydestination
relay_domains_reject_code = 554
relay_recipient_maps = 
relay_transport = relay
relayhost = 
relocated_maps = 
remote_header_rewrite_domain = 
require_home_directory = no
resolve_dequoted_address = yes
resolve_null_domain = no
resolve_numeric_domain = no
rewrite_service_name = rewrite
sample_directory = /usr/share/doc/postfix-2.3.3/samples
sender_bcc_maps = 
sender_canonical_classes = envelope_sender, header_sender
sender_canonical_maps = 
sender_dependent_relayhost_maps = 
sendmail_path = /usr/sbin/sendmail.postfix
service_throttle_time = 60s
setgid_group = postdrop
show_user_unknown_table_name = yes
showq_service_name = showq
smtp_always_send_ehlo = yes
smtp_bind_address = 
smtp_bind_address6 = 
smtp_cname_overrides_servername = no
smtp_connect_timeout = 30s
smtp_connection_cache_destinations = 
smtp_connection_cache_on_demand = yes
smtp_connection_cache_time_limit = 2s
smtp_connection_reuse_time_limit = 300s
smtp_data_done_timeout = 600s
smtp_data_init_timeout = 120s
smtp_data_xfer_timeout = 180s
smtp_defer_if_no_mx_address_found = no
smtp_destination_concurrency_limit = $default_destination_concurrency_limit
smtp_destination_recipient_limit = $default_destination_recipient_limit
smtp_discard_ehlo_keyword_address_maps = 
smtp_discard_ehlo_keywords = 
smtp_enforce_tls = no
smtp_fallback_relay = $fallback_relay
smtp_generic_maps = 
smtp_helo_name = $myhostname
smtp_helo_timeout = 300s
smtp_host_lookup = dns
smtp_line_length_limit = 990
smtp_mail_timeout = 300s
smtp_mx_address_limit = 5
smtp_mx_session_limit = 2
smtp_never_send_ehlo = no
smtp_pix_workaround_delay_time = 10s
smtp_pix_workaround_threshold_time = 500s
smtp_quit_timeout = 300s
smtp_quote_rfc821_envelope = yes
smtp_randomize_addresses = yes
smtp_rcpt_timeout = 300s
smtp_rset_timeout = 20s
smtp_sasl_auth_enable = yes
smtp_sasl_mechanism_filter = 
smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd
smtp_sasl_path = 
smtp_sasl_security_options = 
smtp_sasl_tls_security_options = $smtp_sasl_security_options
smtp_sasl_tls_verified_security_options = $smtp_sasl_tls_security_options
smtp_sasl_type = cyrus
smtp_send_xforward_command = no
smtp_sender_dependent_authentication = no
smtp_skip_5xx_greeting = yes
smtp_skip_quit_response = yes
smtp_starttls_timeout = 300s
smtp_tls_CAfile = 
smtp_tls_CApath = 
smtp_tls_cert_file = 
smtp_tls_dcert_file = 
smtp_tls_dkey_file = $smtp_tls_dcert_file
smtp_tls_enforce_peername = yes
smtp_tls_exclude_ciphers = 
smtp_tls_key_file = $smtp_tls_cert_file
smtp_tls_loglevel = 0
smtp_tls_mandatory_ciphers = medium
smtp_tls_mandatory_exclude_ciphers = 
smtp_tls_mandatory_protocols = SSLv3, TLSv1
smtp_tls_note_starttls_offer = no
smtp_tls_per_site = 
smtp_tls_policy_maps = 
smtp_tls_scert_verifydepth = 5
smtp_tls_secure_cert_match = nexthop, dot-nexthop
smtp_tls_security_level = 
smtp_tls_session_cache_database = 
smtp_tls_session_cache_timeout = 3600s
smtp_tls_verify_cert_match = hostname
smtp_use_tls = no
smtp_xforward_timeout = 300s
smtpd_authorized_verp_clients = $authorized_verp_clients
smtpd_authorized_xclient_hosts = 
smtpd_authorized_xforward_hosts = 
smtpd_banner = $myhostname ESMTP $mail_name
smtpd_client_connection_count_limit = 50
smtpd_client_connection_rate_limit = 0
smtpd_client_event_limit_exceptions = ${smtpd_client_connection_limit_exceptions:$mynetworks}
smtpd_client_message_rate_limit = 0
smtpd_client_new_tls_session_rate_limit = 0
smtpd_client_recipient_rate_limit = 0
smtpd_client_restrictions = 
smtpd_data_restrictions = 
smtpd_delay_open_until_valid_rcpt = yes
smtpd_delay_reject = yes
smtpd_discard_ehlo_keyword_address_maps = 
smtpd_discard_ehlo_keywords = 
smtpd_end_of_data_restrictions = 
smtpd_enforce_tls = no
smtpd_error_sleep_time = 1s
smtpd_etrn_restrictions = 
smtpd_expansion_filter = \t\40!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_`abcdefghijklmnopqrstuvwxyz{|}~
smtpd_forbidden_commands = CONNECT GET POST
smtpd_hard_error_limit = 20
smtpd_helo_required = no
smtpd_helo_restrictions = 
smtpd_history_flush_threshold = 100
smtpd_junk_command_limit = 100
smtpd_milters = 
smtpd_noop_commands = 
smtpd_null_access_lookup_key = <>
smtpd_peername_lookup = yes
smtpd_policy_service_max_idle = 300s
smtpd_policy_service_max_ttl = 1000s
smtpd_policy_service_timeout = 100s
smtpd_proxy_ehlo = $myhostname
smtpd_proxy_filter = 
smtpd_proxy_timeout = 100s
smtpd_recipient_limit = 1000
smtpd_recipient_overshoot_limit = 1000
smtpd_recipient_restrictions = permit_mynetworks, reject_unauth_destination
smtpd_reject_unlisted_recipient = yes
smtpd_reject_unlisted_sender = no
smtpd_restriction_classes = 
smtpd_sasl_auth_enable = no
smtpd_sasl_authenticated_header = no
smtpd_sasl_exceptions_networks = 
smtpd_sasl_local_domain = 
smtpd_sasl_path = private/auth
smtpd_sasl_security_options = noanonymous
smtpd_sasl_tls_security_options = $smtpd_sasl_security_options
smtpd_sasl_type = dovecot
smtpd_sender_login_maps = 
smtpd_sender_restrictions = 
smtpd_soft_error_limit = 10
smtpd_starttls_timeout = 300s
smtpd_timeout = 300s
smtpd_tls_CAfile = 
smtpd_tls_CApath = 
smtpd_tls_always_issue_session_ids = yes
smtpd_tls_ask_ccert = no
smtpd_tls_auth_only = no
smtpd_tls_ccert_verifydepth = 5
smtpd_tls_cert_file = 
smtpd_tls_dcert_file = 
smtpd_tls_dh1024_param_file = 
smtpd_tls_dh512_param_file = 
smtpd_tls_dkey_file = $smtpd_tls_dcert_file
smtpd_tls_exclude_ciphers = 
smtpd_tls_key_file = $smtpd_tls_cert_file
smtpd_tls_loglevel = 0
smtpd_tls_mandatory_ciphers = medium
smtpd_tls_mandatory_exclude_ciphers = 
smtpd_tls_mandatory_protocols = SSLv3, TLSv1
smtpd_tls_received_header = no
smtpd_tls_req_ccert = no
smtpd_tls_security_level = 
smtpd_tls_session_cache_database = 
smtpd_tls_session_cache_timeout = 3600s
smtpd_tls_wrappermode = no
smtpd_use_tls = no
soft_bounce = no
stale_lock_time = 500s
strict_7bit_headers = no
strict_8bitmime = no
strict_8bitmime_body = no
strict_mime_encoding_domain = no
strict_rfc821_envelopes = no
sun_mailtool_compatibility = no
swap_bangpath = yes
syslog_facility = mail
syslog_name = postfix
tls_daemon_random_bytes = 32
tls_export_cipherlist = ALL:+RC4:@STRENGTH
tls_high_cipherlist = !EXPORT:!LOW:!MEDIUM:ALL:+RC4:@STRENGTH
tls_low_cipherlist = !EXPORT:ALL:+RC4:@STRENGTH
tls_medium_cipherlist = !EXPORT:!LOW:ALL:+RC4:@STRENGTH
tls_null_cipherlist = !aNULL:eNULL+kRSA
tls_random_bytes = 32
tls_random_exchange_name = ${config_directory}/prng_exch
tls_random_prng_update_period = 3600s
tls_random_reseed_period = 3600s
tls_random_source = dev:/dev/urandom
trace_service_name = trace
transport_maps = 
transport_retry_time = 60s
trigger_timeout = 10s
undisclosed_recipients_header = To: undisclosed-recipients:;
unknown_address_reject_code = 450
unknown_client_reject_code = 450
unknown_hostname_reject_code = 450
unknown_local_recipient_reject_code = 550
unknown_relay_recipient_reject_code = 550
unknown_virtual_alias_reject_code = 550
unknown_virtual_mailbox_reject_code = 550
unverified_recipient_reject_code = 450
unverified_sender_reject_code = 450
verp_delimiter_filter = -=+
virtual_alias_domains = $virtual_alias_maps
virtual_alias_expansion_limit = 1000
virtual_alias_maps = $virtual_maps
virtual_alias_recursion_limit = 1000
virtual_destination_concurrency_limit = $default_destination_concurrency_limit
virtual_destination_recipient_limit = $default_destination_recipient_limit
virtual_gid_maps = 
virtual_mailbox_base = 
virtual_mailbox_domains = $virtual_mailbox_maps
virtual_mailbox_limit = 51200000
virtual_mailbox_lock = fcntl
virtual_mailbox_maps = 
virtual_minimum_uid = 100
virtual_transport = virtual
virtual_uid_maps = 
[root@mx3 dovecot]#

My dovecot.conf

Code:

## Dovecot configuration file


# Protocols we want to be serving: imap imaps pop3 pop3s
# If you only want to use dovecot-auth, you can set this to "none".
#protocols = imap imaps pop3 pop3s

# IP or host address where to listen in for connections. It's not currently
# possible to specify multiple addresses. "*" listens in all IPv4 interfaces.
# "[::]" listens in all IPv6 interfaces, but may also listen in all IPv4
# interfaces depending on the operating system.
#
# If you want to specify ports for each service, you will need to configure
# these settings inside the protocol imap/pop3 { ... } section, so you can
# specify different ports for IMAP/POP3. For example:
#   protocol imap {
#     listen = *:10143
#     ssl_listen = *:10943
#     ..
#   }
#   protocol pop3 {
#     listen = *:10100
#     ..
#   }
#listen = [::]

log_path = /var/log/dovecot/error.log

# Log file to use for informational and debug messages.
# Default is the same as log_path.
info_log_path = /var/log/dovecot/info.log

# Prefix for each line written to log file. % codes are in strftime(3)
# format.
#log_timestamp = "%b %d %H:%M:%S "

# Disable SSL/TLS support.
#ssl_disable = no
ssl_disable = yes

# Set max. process size in megabytes. If you don't use
# login_process_per_connection you might need to grow this.
login_process_size = 64

# Space-separated list of elements we want to log. The elements which have
# a non-empty variable value are joined together to form a comma-separated
# string.
#login_log_format_elements = user=<%u> method=%m rip=%r lip=%l %c

# Login log format. %$ contains login_log_format_elements string, %s contains
# the data we want to log.
#login_log_format = %$: %s

##
## Mailbox locations and namespaces
##

# Location for users' mailboxes. This is the same as the old default_mail_env
# setting. The default is empty, which means that Dovecot tries to find the
# mailboxes automatically. This won't work if the user doesn't have any mail
# yet, so you should explicitly tell Dovecot the full location.
#
# If you're using mbox, giving a path to the INBOX file (eg. /var/mail/%u)
# isn't enough. You'll also need to tell Dovecot where the other mailboxes are
# kept. This is called the "root mail directory", and it must be the first
# path given in the mail_location setting.
#
# There are a few special variables you can use, eg.:
#
#   %u - username
#   %n - user part in user@domain, same as %u if there's no domain
#   %d - domain part in user@domain, empty if there's no domain
#   %h - home directory
#
# See doc/wiki/Variables.txt for full list. Some examples:
#
#   mail_location = maildir:~/Maildir
#   mail_location = mbox:~/mail:INBOX=/var/mail/%u
#   mail_location = mbox:/var/mail/%d/%1n/%n:INDEX=/var/indexes/%d/%1n/%n
#
# <doc/wiki/MailLocation.txt>
#
#mail_location = 


# Save mails with CR+LF instead of plain LF. This makes sending those mails
# take less CPU, especially with sendfile() syscall with Linux and FreeBSD.
# But it also creates a bit more disk I/O which may just make it slower.
# Also note that if other software reads the mboxes/maildirs, they may handle
# the extra CRs wrong and cause problems.
#mail_save_crlf = no

##
## Maildir-specific settings
##

##
## mbox-specific settings
##

# Which locking methods to use for locking mbox. There are four available:
#  dotlock: Create <mailbox>.lock file. This is the oldest and most NFS-safe
#           solution. If you want to use /var/mail/ like directory, the users
#           will need write access to that directory.
#  fcntl  : Use this if possible. Works with NFS too if lockd is used.
#  flock  : May not exist in all systems. Doesn't work with NFS.
#  lockf  : May not exist in all systems. Doesn't work with NFS.
#
# You can use multiple locking methods; if you do the order they're declared
# in is important to avoid deadlocks if other MTAs/MUAs are using multiple
# locking methods as well. Some operating systems don't allow using some of
# them simultaneously.
#mbox_read_locks = fcntl
#mbox_write_locks = fcntl

# Maximum time in seconds to wait for lock (all of them) before aborting.
#mbox_lock_timeout = 300

# If dotlock exists but the mailbox isn't modified in any way, override the
# lock file after this many seconds.
#mbox_dotlock_change_timeout = 120


# Like mbox_dirty_syncs, but don't do full syncs even with SELECT, EXAMINE,
# EXPUNGE or CHECK commands. If this is set, mbox_dirty_syncs is ignored.
#mbox_very_dirty_syncs = no

# Delay writing mbox headers until doing a full write sync (EXPUNGE and CHECK
# commands and when closing the mailbox). This is especially useful for POP3
# where clients often delete all mails. The downside is that our changes
# aren't immediately visible to other MUAs.
#mbox_lazy_writes = yes

# If mbox size is smaller than this (in kilobytes), don't write index files.
# If an index file already exists it's still read, just not updated.
#mbox_min_index_size = 0

##
## dbox-specific settings
##

# Maximum dbox file size in kilobytes until it's rotated.
#dbox_rotate_size = 2048

# Minimum dbox file size in kilobytes before it's rotated
# (overrides dbox_rotate_days)
#dbox_rotate_min_size = 16

# Maximum dbox file age in days until it's rotated. Day always begins from
# midnight, so 1 = today, 2 = yesterday, etc. 0 = check disabled.
#dbox_rotate_days = 0

##
## IMAP specific settings
##

protocol imap {
  # Login executable location.
  #login_executable = /usr/libexec/dovecot/imap-login

  # IMAP executable location. Changing this allows you to execute other
  # binaries before the imap process is executed.
  #
  # This would write rawlogs into ~/dovecot.rawlog/ directory:
  #   mail_executable = /usr/libexec/dovecot/rawlog /usr/libexec/dovecot/imap
  #
  # This would attach gdb into the imap process and write backtraces into
  # /tmp/gdbhelper.* files:
  #   mail_executable = /usr/libexec/dovecot/gdbhelper /usr/libexec/dovecot/imap
  #
  #mail_executable = /usr/libexec/dovecot/imap

  # Maximum IMAP command line length in bytes. Some clients generate very long
  # command lines with huge mailboxes, so you may need to raise this if you get
  # "Too long argument" or "IMAP command line too large" errors often.
  #imap_max_line_length = 65536

  # Support for dynamically loadable plugins. mail_plugins is a space separated
  # list of plugins to load.
  #mail_plugins = 
  #mail_plugin_dir = /usr/lib/dovecot/imap

  # Send IMAP capabilities in greeting message. This makes it unnecessary for
  # clients to request it with CAPABILITY command, so it saves one round-trip.
  # Many clients however don't understand it and ask the CAPABILITY anyway.
  #login_greeting_capability = no

  # Override the IMAP CAPABILITY response.
  #imap_capability = 

}
  
##
## POP3 specific settings
##

protocol pop3 {
  # Login executable location.
  #login_executable = /usr/libexec/dovecot/pop3-login

  # POP3 executable location. See IMAP's mail_executable above for examples
  # how this could be changed.
  #mail_executable = /usr/libexec/dovecot/pop3

  # Don't try to set mails non-recent or seen with POP3 sessions. This is
  # mostly intended to reduce disk I/O. With maildir it doesn't move files
  # from new/ to cur/, with mbox it doesn't write Status-header.
  #pop3_no_flag_updates = no

  # Support LAST command which exists in old POP3 specs, but has been removed
  # from new ones. Some clients still wish to use this though. Enabling this
  # makes RSET command clear all \Seen flags from messages.
  #pop3_enable_last = no

  # If mail has X-UIDL header, use it as the mail's UIDL.
  #pop3_reuse_xuidl = no

  # Keep the mailbox locked for the entire POP3 session.
  #pop3_lock_session = no

  # POP3 logout format string:
  #  %t - number of TOP commands
  #  %p - number of bytes sent to client as a result of TOP command
  #  %r - number of RETR commands
  #  %b - number of bytes sent to client as a result of RETR command
  #  %d - number of deleted messages
  #  %m - number of messages (before deletion)
  #  %s - mailbox size in bytes (before deletion)
  #pop3_logout_format = top=%t/%p, retr=%r/%b, del=%d/%m, size=%s

  # Support for dynamically loadable plugins. mail_plugins is a space separated
  # list of plugins to load.
  #mail_plugins = 
  #mail_plugin_dir = /usr/lib/dovecot/pop3

  # Workarounds for various client bugs:
  #   outlook-no-nuls:
  #     Outlook and Outlook Express hang if mails contain NUL characters.
  #     This setting replaces them with 0x80 character.
  #   oe-ns-eoh:
  #     Outlook Express and Netscape Mail breaks if end of headers-line is
  #     missing. This option simply sends it if it's missing.
  # The list is space-separated.
  #pop3_client_workarounds = 
}

##
## LDA specific settings
##

protocol lda {
  # Address to use when sending rejection mails.
  postmaster_address = postmaster@example.com

  # Hostname to use in various parts of sent mails, eg. in Message-Id.
  # Default is the system's real hostname.
  #hostname = 

  # Support for dynamically loadable plugins. mail_plugins is a space separated
  # list of plugins to load.
  #mail_plugins = 
  #mail_plugin_dir = /usr/lib/dovecot/lda

  # Binary to use for sending mails.
  #sendmail_path = /usr/lib/sendmail

  # UNIX socket path to master authentication server to find users.
  #auth_socket_path = /var/run/dovecot/auth-master
}

##
## Authentication processes
##

# Executable location
#auth_executable = /usr/libexec/dovecot/dovecot-auth

# Set max. process size in megabytes.
#auth_process_size = 256

auth_username_format="%Ld_%Ln"

# If you want to allow master users to log in by specifying the master
# username within the normal username string (ie. not using SASL mechanism's
# support for it), you can specify the separator character here. The format
# is then <username><separator><master username>. UW-IMAP uses "*" as the
# separator, so that could be a good choice.
#auth_master_user_separator =

# Username to use for users logging in with ANONYMOUS SASL mechanism
#auth_anonymous_username = anonymous

# More verbose logging. Useful for figuring out why authentication isn't
# working.
#auth_verbose = no

# Even more verbose logging for debugging purposes. Shows for example SQL
# queries.
#auth_debug = no

# In case of password mismatches, log the passwords and used scheme so the
# problem can be debugged. Requires auth_debug=yes to be set.
#auth_debug_passwords = no

# Maximum number of dovecot-auth worker processes. They're used to execute
# blocking passdb and userdb queries (eg. MySQL and PAM). They're
# automatically created and destroyed as needed.
#auth_worker_max_count = 30

# Host name to use in GSSAPI principal names. The default is to use the
# name returned by gethostname().
#auth_gssapi_hostname =

# Kerberos keytab to use for the GSSAPI mechanism. Will use the system 
# default (usually /etc/krb5.keytab) if not specified.
#auth_krb5_keytab = 

auth default {
  # Space separated list of wanted authentication mechanisms:
  #   plain login digest-md5 cram-md5 ntlm rpa apop anonymous gssapi
  # NOTE: See also disable_plaintext_auth setting.
  mechanisms = plain

  #
  # Password database is used to verify user's password (and nothing more).
  # You can have multiple passdbs and userdbs. This is useful if you want to
  # allow both system users (/etc/passwd) and virtual users to login without
  # duplicating the system users into virtual database.
  #
  # <doc/wiki/PasswordDatabase.txt>
  #
  # By adding master=yes setting inside a passdb you make the passdb a list
  # of "master users", who can log in as anyone else. Unless you're using PAM,
  # you probably still want the destination user to be looked up from passdb
  # that it really exists. This can be done by adding pass=yes setting to the
  # master passdb. <doc/wiki/Authentication.MasterUsers.txt>

  # Users can be temporarily disabled by adding a passdb with deny=yes.
  # If the user is found from that database, authentication will fail.
  # The deny passdb should always be specified before others, so it gets
  # checked first. Here's an example:

  #passdb passwd-file {
    # File contains a list of usernames, one per line
    #args = /etc/dovecot.deny
    #deny = yes
  #}

  }

  # System users (NSS, /etc/passwd, or similiar)
  # In many systems nowadays this uses Name Service Switch, which is
  # configured in /etc/nsswitch.conf. <doc/wiki/AuthDatabase.Passwd.txt>
  #passdb passwd {
    # [blocking=yes] - See userdb passwd for explanation
    #args = 
  #}

  # Shadow passwords for system users (NSS, /etc/shadow or similiar).
  # Deprecated by PAM nowadays.
  # <doc/wiki/PasswordDatabase.Shadow.txt>
  #passdb shadow {
    # [blocking=yes] - See userdb passwd for explanation
    #args = 
  #}

  # PAM-like authentication for OpenBSD.
  # <doc/wiki/PasswordDatabase.BSDAuth.txt>
  #passdb bsdauth {
    # [cache_key=<key>] - See cache_key in PAM for explanation.
    #args =
  #}

  # passwd-like file with specified location
  # <doc/wiki/AuthDatabase.PasswdFile.txt>
  #passdb passwd-file {
    # Path for passwd-file
    #args = 
  #}

  # checkpassword executable authentication
  # NOTE: You will probably want to use "userdb prefetch" with this.
  # <doc/wiki/PasswordDatabase.CheckPassword.txt>
  #passdb checkpassword {
    # Path for checkpassword binary
    #args = 
  #}

  # SQL database <doc/wiki/AuthDatabase.SQL.txt>
  #passdb sql {
    # Path for SQL configuration file, see doc/dovecot-sql-example.conf
    #args = 
  #}

  # LDAP database <doc/wiki/AuthDatabase.LDAP.txt>
  #passdb ldap {
    # Path for LDAP configuration file, see doc/dovecot-ldap-example.conf
    #args = 
  #}

  # vpopmail authentication <doc/wiki/AuthDatabase.VPopMail.txt>
  #passdb vpopmail {
    # [cache_key=<key>] - See cache_key in PAM for explanation.
    #args =
  #}

  #
  # User database specifies where mails are located and what user/group IDs
  # own them. For single-UID configuration use "static".
  #
  # <doc/wiki/UserDatabase.txt>
  #

  # System users (NSS, /etc/passwd, or similiar). In many systems nowadays this
  # uses Name Service Switch, which is configured in /etc/nsswitch.conf.
  # <doc/wiki/AuthDatabase.Passwd.txt>
  userdb passwd {
    # [blocking=yes] - By default the lookups are done in the main dovecot-auth
    # process. This setting causes the lookups to be done in auth worker
    # proceses. Useful with remote NSS lookups that may block.
    # NOTE: Be sure to use this setting with nss_ldap or users might get
    # logged in as each others!
    #args = 
  }

  # passwd-like file with specified location
  # <doc/wiki/AuthDatabase.PasswdFile.txt>
  #userdb passwd-file {
    # Path for passwd-file
    #args =
  #}


  # User to use for the process. This user needs access to only user and
  # password databases, nothing else. Only shadow and pam authentication
  # requires roots, so use something else if possible. Note that passwd
  # authentication with BSDs internally accesses shadow files, which also
  # requires roots. Note that this user is NOT used to access mails.
  # That user is specified by userdb above.
  user = root

}

# If you wish to use another authentication server than dovecot-auth, you can
# use connect sockets. They are assumed to be already running, Dovecot's master
# process only tries to connect to them. They don't need any other settings
# than the path for the master socket, as the configuration is done elsewhere.
# Note that the client sockets must exist in the login_dir.
#auth external {
#  socket connect {
#    master {
#      path = /var/run/dovecot/auth-master
#    }
#  }
#}



dict {
  #quota = mysql:/etc/dovecot-dict-quota.conf 
}

##
## Plugin settings
##

plugin {
}

Logs:

Code:

dovecot: Sep 24 13:32:37 Info: Dovecot v1.0.7 starting up
dovecot: Sep 24 13:32:51 Info: pop3-login: Disconnected: rip=10.10.200.60, lip=10.10.200.100
dovecot: Sep 24 13:33:21 Info: pop3-login: Disconnected: user=<_jmarcus>, method=PLAIN, rip=10.10.200.60, lip=10.10.200.100
dovecot: Sep 24 13:33:27 Info: pop3-login: Disconnected: user=<_jmarcus>, method=PLAIN, rip=10.10.200.60, lip=10.10.200.100

I have mail in my home directory, but can't seem to get POP working.

I'm running CentOS 5.3 with SELINUX disabled. Any thoughts?

thanks,
James

Navigation

Facebook

News

Recent comments

Newsletter