Navigation

rebel78 · #1 7th July 2009, 18:53

I have a problem with ISPConfig 3.0.1.3 on Debian lenny. I assigned in the panel 4 ips but only first (main) is working fine. Rest 3 ips do not work. I remove domains, assign domains once again and still domains on these 2 ips do not work.

Where should i try to find a problem ? What can i do with it ?

ps. it will be great to have a demo of ispconfig 3

till · #2 8th July 2009, 00:31

You have to configure the IP addresses in your network card too.

rebel78 · #3 8th July 2009, 09:15

My admin said that he configured IP addresses in the network card. Is it something else which we should do ?

Now only domains on first ip are working fine. All the rest do not work but when i use IP in firefox i got "Welcome to your website!". Hmm we do not know what we can do and if it is possible to cancel ispconfig and install other CP

Regards

till · #4 8th July 2009, 09:25

Quote:

Hmm we do not know what we can do and if it is possible to cancel ispconfig and install other CP

Not sure why you want to do this. If ispconfig works fine on thousands of servers it will work on yours too. So you should just check your system why the IP addresses wont work.

1) Check with the command "ifconfig" that your network card has the correct IP's configured.
2) Add the Ip addresses in ISPConfig.
3) Add a website in ISPConfig were you select the IP address.
4) Make sure that the domain of this website really points to the selected IP address with a dns A-Record. Be aware that changes in dns take up to 48 hours and that your site will work only with a correct dns record of course.

rebel78 · #5 8th July 2009, 11:28

i did it once again as You said and nothing changed. Still the first ip is working and rest not.

Maybe the problem is with dns ? Each of the domains have own dns on one ip (so ns1, ns2 = 1ip)

till · #6 8th July 2009, 11:33

Please post the output of the command:

ifconfig

and the name of a domain that is not working.

rebel78 · #7 8th July 2009, 11:49

i sent You PM

Admin said that ip is working fine (ping is ok) but ispconfig do not add vhosts on ips.

till · #8 8th July 2009, 11:54

Quote:

Originally Posted by rebel78

Admin said that ip is working fine (ping is ok) but ispconfig do not add vhosts on ips.

Then your admin is wrong. I just tested the domain you send me and it is not pointing to your server in dns:

Code:

dig ba***********e.com

; <<>> DiG 9.5.1-P1 <<>> ba*********e.com
;; global options:  printcmd
;; connection timed out; no servers could be reached

Most likely you missed to add glue records for the domain. Example: if you have the domain mydomain.tld and want to use dns servers that belong to the same domain like ns1.mydomain.tld and ns2.mydomain.tld you will have to add glue records in the dns server of the registry were you ordered the domain. So this problem is very likely not in your ispconfig installation.