Using Squirrelmail with ISPConfig 3 and Courier IMAP

[dpicella]

I think I am working out the final kinks in using squirrelmail with a new ISPConfig 3 installation. I followed all the instructions for a Fedora 10 install at:

http://www.howtoforge.com/perfect-se...10-ispconfig-3

At first, I had a problem with courier-imap, but all services are running now and

.../squirrelmail/src/configtest.php

Passes all tests.

For some reason, I can log in to new email accounts and send mail. However, mail messages are not being received.

Not sure where to start troubleshooting. I suppose I can go to the logs in
/var/log such as # cat maillog | grep email@address.com

... Now what? Thanks for any help!!

[till]

Please post an excerpt of your mail log when you send an email to the server.

[dpicella]

Originally Posted by till

Please post an excerpt of your mail log when you send an email to the server.

Here is the ouput after sending inbound from gmail ...

Originally Posted by dpicella

May 6 13:19:09 ss0609 postfix/pipe[5535]: 30E20240034: to=<my@email.com>, relay=maildrop, delay=0.06, delays=0.02/0.02/0/0.02, dsn=5.1.1, status=bounced (user unknown. Command output: Invalid user specified. )
May 6 13:19:09 ss0609 postfix/smtp[5530]: E3BEF240033: to=<my@email.com>, relay=127.0.0.1[127.0.0.1]:10024, delay=5.5, delays=0.57/0.01/0.01/4.9, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as 30E20240034)

[dpicella]

This is the output that was returned to gmail ...

This is the mail system at host localhost.localdomain.

I'm sorry to have to inform you that your message could not
be delivered to one or more recipients. It's attached below.

For further assistance, please send mail to postmaster.

If you do so, please include this problem report. You can
delete your own text from the attached returned message.

The mail system

<my@email.com>: user unknown. Command output: Invalid user specified.

Final-Recipient: rfc822; my@email.com
Original-Recipient: rfc822;my@email.com
Action: failed
Status: 5.1.1
Diagnostic-Code: x-unix; Invalid user specified.

[dpicella]

I am starting to think that the problem is with maildrop. I am not sure how maildrop is configured or if it is set up to use mysql for authentication.

authtest my@email.com produces:

Authentication succeeded.

Authenticated: my@email.com (uid 5000, gid 5000)
Home Directory: /var/vmail
Maildir: /var/vmail/email.com/my
Quota: 104857600
Encrypted Password: [something]
Cleartext Password: (none)
Options: disableimap=0,disablepop3=0

[falko]

What's in /etc/postfix/master.cf?

[dpicella]

Contents of /etc/postfix/master.cf

#
# Postfix master process configuration file. For details on the format
# of the file, see the master(5) manual page (command: "man 5 master").
#
# Do not forget to execute "postfix reload" after editing this file.
#
# ================================================== ========================
# service type private unpriv chroot wakeup maxproc command + args
# (yes) (yes) (yes) (never) (100)
# ================================================== ========================
smtp inet n - n - - smtpd
#submission inet n - n - - smtpd
# -o smtpd_tls_security_level=encrypt
# -o smtpd_sasl_auth_enable=yes
# -o smtpd_client_restrictions=permit_sasl_authenticate d,reject
# -o milter_macro_daemon_name=ORIGINATING
#smtps inet n - n - - smtpd
# -o smtpd_tls_wrappermode=yes
# -o smtpd_sasl_auth_enable=yes
# -o smtpd_client_restrictions=permit_sasl_authenticate d,reject
# -o milter_macro_daemon_name=ORIGINATING
#628 inet n - n - - qmqpd
pickup fifo n - n 60 1 pickup
cleanup unix n - n - 0 cleanup
qmgr fifo n - n 300 1 qmgr
#qmgr fifo n - n 300 1 oqmgr
tlsmgr unix - - n 1000? 1 tlsmgr
rewrite unix - - n - - trivial-rewrite
bounce unix - - n - 0 bounce
defer unix - - n - 0 bounce
trace unix - - n - 0 bounce
verify unix - - n - 1 verify
flush unix n - n 1000? 0 flush
proxymap unix - - n - - proxymap
proxywrite unix - - n - 1 proxymap
smtp unix - - n - - smtp
# When relaying mail as backup MX, disable fallback_relay to avoid MX loops
relay unix - - n - - smtp
-o smtp_fallback_relay=
# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq unix n - n - - showq
error unix - - n - - error
retry unix - - n - - error
discard unix - - n - - discard
local unix - n n - - local
virtual unix - n n - - virtual
lmtp unix - - n - - lmtp
anvil unix - - n - 1 anvil
scache unix - - n - 1 scache
#
# ================================================== ==================
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# Many of the following services use the Postfix pipe(8) delivery
# agent. See the pipe(8) man page for information about ${recipient}
# and other message envelope options.
# ================================================== ==================
#
# maildrop. See the Postfix MAILDROP_README file for details.
# Also specify in main.cf: maildrop_destination_recipient_limit=1
#
maildrop unix - n n - - pipe
flags=R user=vmail argv=/usr/bin/maildrop -d ${recipient} ${extension} ${recipient} ${user} ${nexthop} ${sender}
#
# ================================================== ==================
#
# The Cyrus deliver program has changed incompatibly, multiple times.
#
#old-cyrus unix - n n - - pipe
# flags=R user=cyrus argv=/usr/lib/cyrus-imapd/deliver -e -m ${extension} ${user}
#
# ================================================== ==================
#
# Cyrus 2.1.5 (Amos Gouaux)
# Also specify in main.cf: cyrus_destination_recipient_limit=1
#
#cyrus unix - n n - - pipe
# user=cyrus argv=/usr/lib/cyrus-imapd/deliver -e -r ${sender} -m ${extension} ${user}
#
# ================================================== ==================
#
# See the Postfix UUCP_README file for configuration details.
#
#uucp unix - n n - - pipe
# flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
#
# ================================================== ==================
#
# Other external delivery methods.
#
#ifmail unix - n n - - pipe
# flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
#
#bsmtp unix - n n - - pipe
# flags=Fq. user=bsmtp argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient
#
#scalemail-backend unix - n n - 2 pipe
# flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store
# ${nexthop} ${user} ${extension}
#
#mailman unix - n n - - pipe
# flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
# ${nexthop} ${user}

amavis unix - - - - 2 smtp
-o smtp_data_done_timeout=1200
-o smtp_send_xforward_command=yes

127.0.0.1:10025 inet n - - - - smtpd
-o content_filter=
-o local_recipient_maps=
-o relay_recipient_maps=
-o smtpd_restriction_classes=
-o smtpd_client_restrictions=
-o smtpd_helo_restrictions=
-o smtpd_sender_restrictions=
-o smtpd_recipient_restrictions=permit_mynetworks,rej ect
-o mynetworks=127.0.0.0/8
-o strict_rfc821_envelopes=yes
-o receive_override_options=no_unknown_recipient_chec ks,no_header_body_checks
-o smtpd_bind_address=127.0.0.1

[falko]

Change

maildrop unix - n n - - pipe
  flags=R user=vmail argv=/usr/bin/maildrop -d ${recipient} ${extension} ${recipient} ${user} ${nexthop} ${sender}

to

maildrop unix - n n - - pipe
  flags=R user=vmail argv=/usr/bin/maildrop -d vmail ${extension} ${recipient} ${user} ${nexthop} ${sender}

and restart Postfix.

[dpicella]

It worked! --Thank you!

Cheers!