Go Back   HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials > ISPConfig 2 > Installation/Configuration

Do you like HowtoForge? Please consider supporting us by becoming a subscriber.
Reply
 
Thread Tools Display Modes
  #1  
Old 5th October 2008, 23:59
stocker741 stocker741 is offline
Junior Member
 
Join Date: Oct 2008
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Default I Fail at installing ispconfig where did I go wrong?

Alright what did I do wrong?

Code:
stocker@linux-server/installs$:tar -zxvf I*.*
[...Unpacks...]

stocker@linux-server:~/installs$ cd install_ispconfig/
stocker@linux-server:~/installs/install_ispconfig$ sudo ./setup 
[sudo] password for stocker: 
Debian lenny/sid.0
./setup2: line 76: export: `/etc/init.d': not a valid identifier
Neuinstallation eines ISPConfig-Systems. / Installation of a new ISPConfig system. / Installation d'ISPConfig sur un nouveau systme.
Whlen Sie Ihre Sprache (deutsch/englisch/spanisch/franzsisch/italienisch/niederlndisch/polnisch/schwedisch): / Please choose your language (German/English/Spanish/French/Italian/Dutch/Polish/Swedish):  / Merci de choisir votre langue (Allemand/Anglais/Espagnol/Franais/Italien/Nerlandais/Polonais/Sudois):
1) de
2) en
3) es
4) fr
5) it
6) nl
7) pl
8) se
Ihre Wahl: / Your Choice: / Votre Choix:2

With the system installation, some system files are replaced where adjustments were made. This can lead to loss of entries in httpd.conf, named.conf as well as in the Sendmail configuration.

Do you want to continue with the installation? [y/n]y

Please read through the licence carefully:

Copyright (c) 2005, projektfarm GmbH, Till Brehm, Falko Timme
All rights reserved.

Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:

    * Redistributions of source code must retain the above copyright notice,
      this list of conditions and the following disclaimer.
    * Redistributions in binary form must reproduce the above copyright notice,
      this list of conditions and the following disclaimer in the documentation
      and/or other materials provided with the distribution.
    * Neither the name of ISPConfig nor the names of its contributors
      may be used to endorse or promote products derived from this software with
out
      specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIME
D.
IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
[7m--More--[27m
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Do you accept the licence? [y/n]y

Please select the installation mode. In expert mode you have to answer some additional questions. In standard mode standard values are assumed for these questions.
1) standard
2) expert
Your Choice: 1

########## MAIL SERVER ##########

Checking for MTA...
/usr/sbin/postfix
OK

ISPConfig found the following MTA:
postfix
Is this correct? [y/n]y


########## FTP SERVER ##########

Checking if an FTP server is installed...
/usr/sbin/vsftpd
OK

ISPConfig found the following FTP server:
vsftpd
Is this correct? [y/n]y


########## PROCMAIL ##########

Checking for package procmail...
/usr/bin/procmail
OK

########## QUOTA ##########

Checking for package quota...
/usr/bin/quota
OK

########## MYSQL SERVER ##########

Checking for package MySQL...
/usr/bin/mysql
OK

########## OPENSSL ##########

Checking for package openssl...
/usr/bin/openssl
OK

########## DNS SERVER ##########

Checking for package bind...
/usr/sbin/named
OK

########## IPTABLES/IPCHAINS/IPFW ##########

Checking for program iptables/ipchains/ipfw...
/sbin/iptables
OK

########## WEB SERVER ##########

Checking for program httpd...
/usr/bin/httpd
OK
Checking the syntax of the httpd.conf...
httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName
Syntax OK
The syntax is ok!

########## gcc ##########

/usr/bin/gcc
OK

########## make ##########

/usr/bin/make
OK

########## lex ##########

/usr/bin/lex
OK

########## g++ ##########

/usr/bin/g++
OK

########## INSTALLATION ##########

[...Bunch of stuff...]
Operating system: x86_64-whatever-linux2
Configuring for linux-x86_64
Configuring for linux-x86_64
IsWindows=0
CC            =gcc
CFLAG         =-DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -DOPENSSL_NO_KRB5 -m64 -DL_ENDIAN -DTERMIO -O3 -Wall -DMD32_REG_T=int
EX_LIBS       =-ldl
BN_ASM        =asm/x86_64-gcc.o
DES_ENC       =des_enc.o fcrypt_b.o
BF_ENC        =bf_enc.o
CAST_ENC      =c_enc.o
RC4_ENC       =asm/rc4-x86_64.o
RC5_ENC       =rc5_enc.o
MD5_OBJ_ASM   =
SHA1_OBJ_ASM  =
RMD160_OBJ_ASM=
PROCESSOR     =
RANLIB        =/usr/bin/ranlib
ARFLAGS       =
PERL          =/usr/bin/perl
SIXTY_FOUR_BIT_LONG mode
DES_UNROLL used
DES_INT used
RC4 uses uchar
RC4_CHUNK is unsigned long
BF_PTR2 used
e_os2.h => include/openssl/e_os2.h
[...Makes a bunch of stuff...]
[...Does more Stuff...}
installing libcrypto.a
installing libssl.a
cp openssl.pc /root/ispconfig/openssl/lib/pkgconfig
chmod 644 /root/ispconfig/openssl/lib/pkgconfig/openssl.pc
 + Warning: Your 'echo' command is slightly broken.
 + It interprets escape sequences per default. We already
 + tried 'echo -E' but had no real success. If errors occur
 + please set the SEO variable in 'configure' manually to
 + the required 'echo' options, i.e. those which force your
 + 'echo' to not interpret escape sequences per default.
Configuring [1mmod_ssl/2.8.31[m for [1mApache/1.3.41[m
 + Apache location: ../apache_1.3.41 (Version 1.3.41)
 + OpenSSL location: /root/ispconfig/openssl

 + Auxiliary patch tool: ./etc/patch/patch (local)...|
 + Auxiliary patch tool: ./etc/patch/patch (local).../
 + Auxiliary patch tool: ./etc/patch/patch (local)...-
 + Auxiliary patch tool: ./etc/patch/patch (local)...\
 + Auxiliary patch tool: ./etc/patch/patch (local)...|
 + Auxiliary patch tool: ./etc/patch/patch (local).../
 + Auxiliary patch tool: ./etc/patch/patch (local)...-
 + Auxiliary patch tool: ./etc/patch/patch (local)...\
 + Auxiliary patch tool: ./etc/patch/patch (local)...|
 + Auxiliary patch tool: ./etc/patch/patch (local).../
 + Auxiliary patch tool: ./etc/patch/patch (local)...-
 + Auxiliary patch tool: ./etc/patch/patch (local)...\
 + Auxiliary patch tool: ./etc/patch/patch (local)...|
 + Auxiliary patch tool: ./etc/patch/patch (local).../
 + Auxiliary patch tool: ./etc/patch/patch (local)...-
 + Auxiliary patch tool: ./etc/patch/patch (local)...\
 + Auxiliary patch tool: ./etc/patch/patch (local)...|
 + Auxiliary patch tool: ./etc/patch/patch (local).../
 + Auxiliary patch tool: ./etc/patch/patch (local)...-
 + Auxiliary patch tool: ./etc/patch/patch (local)...\
 + Auxiliary patch tool: ./etc/patch/patch (local)...|
 + Auxiliary patch tool: ./etc/patch/patch (local).../
 + Auxiliary patch tool: ./etc/patch/patch (local)...-
 + Auxiliary patch tool: ./etc/patch/patch (local)...\
 + Auxiliary patch tool: ./etc/patch/patch (local)...|
 + Auxiliary patch tool: ./etc/patch/patch (local).../
 + Auxiliary patch tool: ./etc/patch/patch (local)...-
 + Auxiliary patch tool: ./etc/patch/patch (local)...\
 + Auxiliary patch tool: ./etc/patch/patch (local)...|
 + Auxiliary patch tool: ./etc/patch/patch (local).../
 + Auxiliary patch tool: ./etc/patch/patch (local)...-
 + Auxiliary patch tool: ./etc/patch/patch (local)...\
 + Auxiliary patch tool: ./etc/patch/patch (local)...|
 + Auxiliary patch tool: ./etc/patch/patch (local).../
 + Auxiliary patch tool: ./etc/patch/patch (local)...-
 + Auxiliary patch tool: ./etc/patch/patch (local)...\
 + Auxiliary patch tool: ./etc/patch/patch (local)...|
 + Auxiliary patch tool: ./etc/patch/patch (local).../
 + Auxiliary patch tool: ./etc/patch/patch (local)...-
 + Auxiliary patch tool: ./etc/patch/patch (local)...\
 + Auxiliary patch tool: ./etc/patch/patch (local)...|
 + Auxiliary patch tool: ./etc/patch/patch (local).../
 + Auxiliary patch tool: ./etc/patch/patch (local)...-
 + Auxiliary patch tool: ./etc/patch/patch (local)...\
 + Auxiliary patch tool: ./etc/patch/patch (local)...|
 + Auxiliary patch tool: ./etc/patch/patch (local).../
 + Auxiliary patch tool: ./etc/patch/patch (local)...-
 + Auxiliary patch tool: ./etc/patch/patch (local)...\
 + Auxiliary patch tool: ./etc/patch/patch (local)...|
 + Auxiliary patch tool: ./etc/patch/patch (local).../
 + Auxiliary patch tool: ./etc/patch/patch (local)...-
 + Auxiliary patch tool: ./etc/patch/patch (local)...\
 + Auxiliary patch tool: ./etc/patch/patch (local)...|
 + Auxiliary patch tool: ./etc/patch/patch (local).../
 + Auxiliary patch tool: ./etc/patch/patch (local)...-
 + Auxiliary patch tool: ./etc/patch/patch (local)...\
 + Auxiliary patch tool: ./etc/patch/patch (local)...|
 + Auxiliary patch tool: ./etc/patch/patch (local).../
 + Auxiliary patch tool: ./etc/patch/patch (local)...-
 + Auxiliary patch tool: ./etc/patch/patch (local)...\
 + Auxiliary patch tool: ./etc/patch/patch (local)...|
 + Auxiliary patch tool: ./etc/patch/patch (local)    
 + Applying packages to Apache source tree:
   o Extended API (EAPI)
   o Distribution Documents
   o SSL Module Source
   o SSL Support
   o SSL Configuration Additions
   o SSL Module Documentation
   o Addons
Done: source extension and patches successfully applied.

Configuring for Apache, Version 1.3.41
 + Warning: Your 'echo' command is slightly broken.
 + It interprets escape sequences per default. We already
 + tried 'echo -E' but had no real success. If errors occur
 + please set the SEO variable in 'configure' manually to
 + the required 'echo' options, i.e. those which force your
 + 'echo' to not interpret escape sequences per default.
 + using installation path layout: Apache (config.layout)
Creating Makefile
Creating Configuration.apaci in src
Syntax error --- The configuration file is used only to
define the list of included modules or to set Makefile in src
options or Configure rules, and I don't see that at all:
/root/ispconfig/openssl
yes
default
no
no
no
 `$(SRCDIR)/apaci`
no
default
default
no
no
no
yes
no
default
no
default
default
[................................................He re is weird stuff happens........................................... .]
Code:
./configure:[1mError[m: APACI failed
ERROR: Could not configure Apache
cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/aps.tar.gz': No such file or directory
mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
mv: cannot stat `binaries/cronolog': No such file or directory
mv: cannot stat `binaries/cronosplit': No such file or directory
mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
mv: cannot stat `binaries/zip': No such file or directory
mv: cannot stat `binaries/unzip': No such file or directory
tar: spamassassin.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `spamassassin': No such file or directory
tar: uudeview.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `uudeview': No such file or directory
tar: clamav.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `clamav': No such file or directory
tar: aps.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `ispconfig_tmp': No such file or directory
cp: cannot stat `dist.info': No such file or directory
All prerequisites are fulfilled.
Here we go...
chmod: cannot access `./install.php': No such file or directory
Please enter your MySQL server:localhost
OK
Please enter your MySQL user:root
Please enter your MySQL password:
OK
Please enter a name for the ISPConfig database (e.g. db_ispconfig):db_ispconfig
Please enter the IP address of the ISPConfig web (e.g. 192.168.0.1):192.168.1.5
OK
Please enter the host name (e.g. www):www(edited)
Please enter the domain (e.g. xyz.de):xyz.de(edited)
The URL is not reachable!
Please enter the host name (e.g. www):www(edited but same)
Please enter the domain (e.g. xyz.de):xyz.de(edited but same)
OK
Please select the protocol (http or https (SSL encryption)) to use to access the ISPConfig system:
1) HTTPS
2) HTTP
Your Choice: 2

./setup2: line 1090: mysql_config: No such file or directory
./setup2: line 1091: httpd: No such file or directory
./setup2: line 1092: httpd2: No such file or directory
./setup2: line 1093: httpd2: No such file or directory
./setup2: line 1103: ip_addresses: No such file or directory
./setup2: line 1105: /root/ispconfig/php/php: No such file or directory
./setup2: line 1106: /root/ispconfig/dist.info: No such file or directory
chmod: cannot access `/home/admispconfig/ispconfig/tools/suphp/usr/bin/php-wrapper': No such file or directory
./setup2: line 1119: /home/admispconfig/ispconfig/sysconf.txt: No such file or directory
./setup2: line 1120: /home/admispconfig/ispconfig/sysconf.txt: No such file or directory
Restarting some services...
apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName
 * Stopping Postfix Mail Transport Agent postfix       [80G 
[74G[ OK ]
 * Starting Postfix Mail Transport Agent postfix       [80G 
[74G[ OK ]
./setup2: line 1163: /etc/init.d/ispconfig_server: No such file or directory
Congratulations! Your ISPConfig system is now installed. If you had to install quota, please take the steps described in the installation manual. Otherwise your system is now available without reboot.
Please direct your browser to

http://www.xyz.de:81 (edited)

and log in:
Username: admin
Password: admin

./setup2: line 1189: cd: /home/stocker/installs/install_ispconfig/compile_aps/../..: No such file or directory




Here is my netstat -tap

Code:
stocker@linux-server:~/installs$ netstat -tap
(Not all processes could be identified, non-owned process info
 will not be shown, you would have to be root to see it all.)
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name
tcp        0      0 *:imaps                 *:*                     LISTEN      -
tcp        0      0 *:pop3s                 *:*                     LISTEN      -
tcp        0      0 *:swat                  *:*                     LISTEN      -
tcp        0      0 localhost:mysql         *:*                     LISTEN      -
tcp        0      0 *:netbios-ssn           *:*                     LISTEN      -
tcp        0      0 *:pop3                  *:*                     LISTEN      -
tcp        0      0 *:imap2                 *:*                     LISTEN      -
tcp        0      0 *:www                   *:*                     LISTEN      -
tcp        0      0 *:ftp                   *:*                     LISTEN      -
tcp        0      0 localhost:ipp           *:*                     LISTEN      -
tcp        0      0 *:smtp                  *:*                     LISTEN      -
tcp        0      0 *:microsoft-ds          *:*                     LISTEN      -
tcp        0      0 192.168.1.:microsoft-ds 192.168.1.105:64257     ESTABLISHED -
tcp        0      0 192.168.1.5:netbios-ssn 192.168.1.101:1469      TIME_WAIT   -
tcp6       0      0 [::]:ssh                [::]:*                  LISTEN      -
tcp6       0      0 192.168.1.5%2055076:ssh 192.168.1.105%205:64278 ESTABLISHED -

Im out of ideas... please assist!

Last edited by stocker741; 6th October 2008 at 00:01.
Reply With Quote
Sponsored Links
  #2  
Old 6th October 2008, 07:22
stocker741 stocker741 is offline
Junior Member
 
Join Date: Oct 2008
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Default

So, I went and did the perfect Install to the T on my ubuntu system and same story.... Though I no longer have those weird errors..... but still the unable to connect on port 81.

Here is my new netstat -t
Code:
stocker@server:~$ netstat -tap
(No info could be read for "-p": geteuid()=1000 but you should be root.)
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name
tcp        0      0 *:swat                  *:*                     LISTEN      -
tcp        0      0 localhost:mysql         *:*                     LISTEN      -
tcp        0      0 *:netbios-ssn           *:*                     LISTEN      -
tcp        0      0 *:www                   *:*                     LISTEN      -
tcp        0      0 localhost:domain        *:*                     LISTEN      -
tcp        0      0 localhost:ipp           *:*                     LISTEN      -
tcp        0      0 *:smtp                  *:*                     LISTEN      -
tcp        0      0 localhost:953           *:*                     LISTEN      -
tcp        0      0 *:https                 *:*                     LISTEN      -
tcp        0      0 *:microsoft-ds          *:*                     LISTEN      -
tcp        0      0 server.digi:netbios-ssn 192.168.1.118:1038      ESTABLISHED -
tcp        0      0 server.dig:microsoft-ds 192.168.1.119:2677      ESTABLISHED -
tcp6       0      0 [::]:imaps              [::]:*                  LISTEN      -
tcp6       0      0 [::]:pop3s              [::]:*                  LISTEN      -
tcp6       0      0 [::]:pop3               [::]:*                  LISTEN      -
tcp6       0      0 [::]:imap2              [::]:*                  LISTEN      -
tcp6       0      0 [::]:ftp                [::]:*                  LISTEN      -
tcp6       0      0 [::]:domain             [::]:*                  LISTEN      -
tcp6       0      0 [::]:ssh                [::]:*                  LISTEN      -
tcp6       0      0 [::]:smtp               [::]:*                  LISTEN      -
tcp6       0      0 ip6-localhost:953       [::]:*                  LISTEN      -
Reply With Quote
  #3  
Old 6th October 2008, 09:56
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lneburg, Germany
Posts: 34,586
Thanks: 792
Thanked 4,983 Times in 3,903 Posts
Default

Please run:

/etc/init.d/ispconfig_server start

The errors in your first install most likely occured because you executed the script with sudo instead of being root.
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
  #4  
Old 6th October 2008, 23:07
stocker741 stocker741 is offline
Junior Member
 
Join Date: Oct 2008
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Default

I went and redid the setup and everything went perfectly... but I cant start it....

Code:
root@server:/home/stocker# /etc/init.d/ispconfig_server start
bash: /etc/init.d/ispconfig_server: No such file or directory
root@server:/home/stocker#

Last edited by stocker741; 6th October 2008 at 23:37.
Reply With Quote
  #5  
Old 7th October 2008, 17:15
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lneburg, Germany
Posts: 41,711
Thanks: 1,899
Thanked 2,702 Times in 2,545 Posts
Default

What's the output of
Code:
df -h
?
Are there any errors or warnings in the ISPConfig installation log in /var/log?
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #6  
Old 7th October 2008, 18:00
stocker741 stocker741 is offline
Junior Member
 
Join Date: Oct 2008
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Alright! I been doing research and I figured it out from one of your old post.

I went and downloaded version 2.2.18

then I did
Code:
apt-get install mysql-server mysql-client libmysqlclient15-dev
then and #bind-address
Code:
vi /etc/mysql/my.cnf
then re ran the setup.
Once it finished i was able to access it! but admin, admin didn't work.

I re-enabled my php and installed phpMyAdmin.

Went to my db_ispconfig and noticed it was blank. I uploaded the SQL file that came with the install and pasted it into phpMyAdmin and hit go. Now everything works perfectly!
Reply With Quote
  #7  
Old 7th October 2008, 18:07
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lneburg, Germany
Posts: 34,586
Thanks: 792
Thanked 4,983 Times in 3,903 Posts
Default

Quote:
I uploaded the SQL file that came with the install and pasted it into phpMyAdmin and hit go. Now everything works perfectly!
I doubt that. The sql file does not contain the nescessary data and can not be installed the way you did. Go to administartion > server > settings in ispconfig, change a setting and click on save. Go back and check if the edited setting has been saved. If yot, you will have to reinstall ISPConfig completely or play back a backup of the original database if available.
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
  #8  
Old 7th October 2008, 18:19
stocker741 stocker741 is offline
Junior Member
 
Join Date: Oct 2008
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Curses...

reinstalling now...
Reply With Quote
  #9  
Old 14th October 2008, 19:43
hahni hahni is offline
Member
 
Join Date: Dec 2007
Posts: 67
Thanks: 1
Thanked 0 Times in 0 Posts
Unhappy

Quote:
Originally Posted by stocker741 View Post
Alright! I been doing research and I figured it out from one of your old post.

I went and downloaded version 2.2.18

then I did
Code:
apt-get install mysql-server mysql-client libmysqlclient15-dev
then and #bind-address
Code:
vi /etc/mysql/my.cnf
then re ran the setup.
Once it finished i was able to access it! but admin, admin didn't work.

I re-enabled my php and installed phpMyAdmin.

Went to my db_ispconfig and noticed it was blank. I uploaded the SQL file that came with the install and pasted it into phpMyAdmin and hit go. Now everything works perfectly!
Your tipp will not work on my machine:

---
./setup
Debian lenny/sid.0
./setup2: line 76: export: `/etc/init.d': not a valid identifier
Upgrade einer existierenden ISPConfig-Installation. / Upgrading an existing ISPConfig installation. / Mise ▒ jour d'une installation d'ISPConfig existante.

Das Upgrade wird von Ihnen ge▒nderte Templates/Dateien von ISPConfig ▒berspielen. Wenn Sie diese Dateien sichern m▒chten, sollten Sie jetzt eine zweite Shell ▒ffnen, um ein Backup der betroffenen Dateien durchzuf▒hren.
The upgrade will overwrite your manual changes to files/templates of ISPConfig. In order to save those files you should open a second shell to make a backup of the affected files.
En uppgradering kommer att skriva ▒ver manuella ▒ndringar gjorda p▒ filer/mallar i ISPConfig.F▒r att spara dessa ▒ndringar b▒r du ▒ppna ett andra skal f▒nster f▒r att g▒ra en backup p▒ ber▒rda filer.
Cette mise ▒ jour va supprimer vos changements dans les fichiers des manuels/modeles d'ISPConfig. Pour sauvegarder ces fichiers vous devez ouvrir une seconde fen▒tre shell et enregistrer les fichiers concern▒s.
Shutting down ISPConfig system...
/root/ispconfig/httpd/bin/apachectl stop: httpd stopped
ISPConfig system stopped!
W▒hlen Sie Ihre Sprache (deutsch/englisch/spanisch/franz▒sisch/italienisch/niederl▒ndisch/polnisch/schwedisch): / Please choose your language (German/English/Spanish/French/Italian/Dutch/Polish/Swedish): / Merci de choisir votre langue (Allemand/Anglais/Espagnol/Fran▒ais/Italien/N▒erlandais/Polonais/Su▒dois):
1) de
2) en
3) es
4) fr
5) it
6) nl
7) pl
8) se
Ihre Wahl: / Your Choice: / Votre Choix:
---
Reply With Quote
  #10  
Old 14th October 2008, 22:47
Shawn Brant Shawn Brant is offline
Junior Member
 
Join Date: Oct 2008
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
 
Default

I am in the same boat. I have Fedora 8 and followed the perfect setup and then installed ispconfig but I can not access it and further more the file does not exist in init.d I also do not see the database I specified. Here is the log file. Any help would be appreciated.

Code:
Tue Oct 14 16:38:47 EDT 2008 - [ISPConfig] - installation directory: /usr/local/src/install_ispconfig
Tue Oct 14 16:38:47 EDT 2008 - [ISPConfig] - operating system: Fedora 8.0
Tue Oct 14 16:38:50 EDT 2008 - [ISPConfig] - Neuinstallation eines ISPConfig-Systems. / Installation of a new ISPConfig system. / Installation d'ISPConfig sur un nouveau syst�me.
Tue Oct 14 16:38:54 EDT 2008 - [ISPConfig] - selected language: en
Tue Oct 14 16:38:56 EDT 2008 - [ISPConfig] - installation note accepted
Tue Oct 14 16:38:58 EDT 2008 - [ISPConfig] - licence accepted
Tue Oct 14 16:39:00 EDT 2008 - [ISPConfig] - installation mode: standard
Tue Oct 14 16:39:01 EDT 2008 - [ISPConfig] - mail: postfix
Tue Oct 14 16:39:01 EDT 2008 - [ISPConfig] - dist_mail=postfix ##
Tue Oct 14 16:39:01 EDT 2008 - [ISPConfig] - dist_mail_log=/var/log/maillog ##
Tue Oct 14 16:39:01 EDT 2008 - [ISPConfig] - dist_mail_virtusertable=/etc/postfix/virtusertable ##
Tue Oct 14 16:39:01 EDT 2008 - [ISPConfig] - dist_mail_local_host_names=/etc/postfix/local-host-names ##
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - ftp: proftpd
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - dist_ftp=proftpd ##
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - dist_ftp_conf=/etc/proftpd.conf ##
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - dist_ftp_version=standalone ##
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - dist_ftp_log=/var/log/xferlog ##
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - procmail found: /usr/bin/procmail
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - quota found: /usr/bin/quota
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - mysql found: /usr/bin/mysql
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - openssl found: /usr/bin/openssl
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - named found: /usr/sbin/named
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - iptables found: /sbin/iptables
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - httpd found: /usr/sbin/httpd
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - httpd syntax ok!
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - dist_path_httpd_root=/var/www ##
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - gcc found: /usr/bin/gcc
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - make found: /usr/bin/make
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - flex found: /usr/bin/lex
Tue Oct 14 16:39:02 EDT 2008 - [ISPConfig] - g++ found: /usr/bin/g++
Tue Oct 14 16:45:16 EDT 2008 - [ISPConfig] - WARNING: could not unpack ISPConfig system
Tue Oct 14 16:45:16 EDT 2008 - [ISPConfig] - WARNING: could not move directory ispconfig_tmp to /root/ispconfig
Tue Oct 14 16:46:13 EDT 2008 - [ISPConfig] - httpd restart successful
Tue Oct 14 16:46:13 EDT 2008 - [ISPConfig] - postfix restart successful
Tue Oct 14 16:46:14 EDT 2008 - [ISPConfig] - file /root/ispconfig/dist.info deleted
Tue Oct 14 16:46:14 EDT 2008 - [ISPConfig] - directory install_ispconfig deleted
Tue Oct 14 16:46:14 EDT 2008 - [ISPConfig] - ##############################
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Changing from mbox to maildir after installing ISPConfig Rustin Installation/Configuration 21 12th October 2010 14:57
Questions before installing ISPConfig 2.2.24 chrisbloom7 Installation/Configuration 2 15th September 2008 14:58
Error installing ISPConfig on debian omniware Installation/Configuration 3 10th September 2008 15:36
Systems unable to restart after installing ISPConfig ste Installation/Configuration 22 2nd May 2008 16:11
Can I avoid installing the clamav etc. coming with ISPConfig bolero Installation/Configuration 1 28th April 2008 15:23


All times are GMT +2. The time now is 18:52.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.