Go Back   HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials > ISPConfig 2 > Installation/Configuration

Do you like HowtoForge? Please consider supporting us by becoming a subscriber.
Reply
 
Thread Tools Display Modes
  #1  
Old 13th February 2008, 08:42
mng mng is offline
Junior Member
 
Join Date: Feb 2008
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default WARNING: could not unpack ISPConfig system

Hi guys, having some problems with installation. I get pass CA section, then the following comes up:

Wed Feb 13 16:13:24 EST 2008 - [ISPConfig] - dist_ftp=proftpd ##
Wed Feb 13 16:13:25 EST 2008 - [ISPConfig] - dist_ftp_conf=/etc/proftpd.conf ##
Wed Feb 13 16:13:25 EST 2008 - [ISPConfig] - dist_ftp_version=standalone ##
Wed Feb 13 16:13:26 EST 2008 - [ISPConfig] - dist_ftp_log=/var/log/xferlog ##
Wed Feb 13 16:13:26 EST 2008 - [ISPConfig] - procmail found: /usr/bin/procmail
Wed Feb 13 16:13:26 EST 2008 - [ISPConfig] - quota found: /usr/bin/quota
Wed Feb 13 16:13:26 EST 2008 - [ISPConfig] - mysql found: /usr/bin/mysql
Wed Feb 13 16:13:26 EST 2008 - [ISPConfig] - openssl found: /usr/bin/openssl
Wed Feb 13 16:13:26 EST 2008 - [ISPConfig] - named found: /usr/sbin/named
Wed Feb 13 16:13:26 EST 2008 - [ISPConfig] - iptables found: /sbin/iptables
Wed Feb 13 16:13:26 EST 2008 - [ISPConfig] - httpd found: /usr/bin/httpd
Wed Feb 13 16:13:26 EST 2008 - [ISPConfig] - httpd syntax ok!
Wed Feb 13 16:13:27 EST 2008 - [ISPConfig] - dist_path_httpd_root=/var/www ##
Wed Feb 13 16:13:27 EST 2008 - [ISPConfig] - gcc found: /usr/bin/gcc
Wed Feb 13 16:13:27 EST 2008 - [ISPConfig] - make found: /usr/bin/make
Wed Feb 13 16:13:27 EST 2008 - [ISPConfig] - flex found: /usr/bin/lex
Wed Feb 13 16:13:27 EST 2008 - [ISPConfig] - g++ found: /usr/bin/g++
Wed Feb 13 16:13:33 EST 2008 - [ISPConfig] - Directory /var/www/sharedip created.
Wed Feb 13 16:13:33 EST 2008 - [ISPConfig] - Use sharedip_index.html_en as SharedIP default page.
Wed Feb 13 16:23:30 EST 2008 - [ISPConfig] - WARNING: could not unpack ISPConfig system
Wed Feb 13 16:23:30 EST 2008 - [ISPConfig] - ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!
Wed Feb 13 17:05:14 EST 2008 - [ISPConfig] - installation directory: /root/install_ispconfig
Wed Feb 13 17:05:14 EST 2008 - [ISPConfig] - operating system: Debian testing/unstable.0
Wed Feb 13 17:05:17 EST 2008 - [ISPConfig] - Neuinstallation eines ISPConfig-Systems. / Installation of a new ISPConfig system. / Installation d'ISPConfig sur un nouveau système.
Wed Feb 13 17:05:19 EST 2008 - [ISPConfig] - selected language: en
Wed Feb 13 17:05:20 EST 2008 - [ISPConfig] - installation note accepted
Wed Feb 13 17:05:21 EST 2008 - [ISPConfig] - licence accepted
Wed Feb 13 17:05:22 EST 2008 - [ISPConfig] - installation mode: expert
Wed Feb 13 17:05:23 EST 2008 - [ISPConfig] - mail: postfix
Wed Feb 13 17:05:23 EST 2008 - [ISPConfig] - dist_mail=postfix ##
Wed Feb 13 17:05:24 EST 2008 - [ISPConfig] - dist_mail_log=/var/log/mail.log ##
Wed Feb 13 17:05:27 EST 2008 - [ISPConfig] - dist_mail_virtusertable=/etc/postfix/virtusertable ##
Wed Feb 13 17:05:32 EST 2008 - [ISPConfig] - dist_mail_local_host_names=/etc/postfix/local-host-names ##
Wed Feb 13 17:05:33 EST 2008 - [ISPConfig] - ftp: proftpd
Wed Feb 13 17:05:33 EST 2008 - [ISPConfig] - dist_ftp=proftpd ##
Wed Feb 13 17:05:33 EST 2008 - [ISPConfig] - dist_ftp_conf=/etc/proftpd.conf ##
Wed Feb 13 17:05:34 EST 2008 - [ISPConfig] - dist_ftp_version=standalone ##
Wed Feb 13 17:05:35 EST 2008 - [ISPConfig] - dist_ftp_log=/var/log/xferlog ##
Wed Feb 13 17:05:35 EST 2008 - [ISPConfig] - procmail found: /usr/bin/procmail
Wed Feb 13 17:05:35 EST 2008 - [ISPConfig] - quota found: /usr/bin/quota
Wed Feb 13 17:05:35 EST 2008 - [ISPConfig] - mysql found: /usr/bin/mysql
Wed Feb 13 17:05:35 EST 2008 - [ISPConfig] - openssl found: /usr/bin/openssl
Wed Feb 13 17:05:35 EST 2008 - [ISPConfig] - named found: /usr/sbin/named
Wed Feb 13 17:05:35 EST 2008 - [ISPConfig] - iptables found: /sbin/iptables
Wed Feb 13 17:05:35 EST 2008 - [ISPConfig] - httpd found: /usr/bin/httpd
Wed Feb 13 17:05:35 EST 2008 - [ISPConfig] - httpd syntax ok!
Wed Feb 13 17:05:37 EST 2008 - [ISPConfig] - dist_path_httpd_root=/var/www ##
Wed Feb 13 17:05:37 EST 2008 - [ISPConfig] - gcc found: /usr/bin/gcc
Wed Feb 13 17:05:37 EST 2008 - [ISPConfig] - make found: /usr/bin/make
Wed Feb 13 17:05:37 EST 2008 - [ISPConfig] - flex found: /usr/bin/lex
Wed Feb 13 17:05:37 EST 2008 - [ISPConfig] - g++ found: /usr/bin/g++
Wed Feb 13 17:05:40 EST 2008 - [ISPConfig] - Directory /var/www/sharedip created.
Wed Feb 13 17:05:40 EST 2008 - [ISPConfig] - Use sharedip_index.html_en as SharedIP default page.
Wed Feb 13 17:11:11 EST 2008 - [ISPConfig] - WARNING: could not unpack ISPConfig system
Wed Feb 13 17:11:11 EST 2008 - [ISPConfig] - ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!
~

I have tried a few things but im still stoked. Any help is much appreciated ^^;

Cheers.
Reply With Quote
Sponsored Links
  #2  
Old 13th February 2008, 11:35
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lneburg, Germany
Posts: 36,794
Thanks: 840
Thanked 5,612 Times in 4,423 Posts
Default

Please post the error messages that you got on the shell. The log does not contain the errors that caused the setup to stop.
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
  #3  
Old 14th February 2008, 01:46
mng mng is offline
Junior Member
 
Join Date: Feb 2008
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by till
Please post the error messages that you got on the shell. The log does not contain the errors that caused the setup to stop.
Thank you for your reply Till!

Here are the messages:

./setup2: line 873: ispconfig_tmp/php/bin/php: No such file or directory

It logs me out of the system.

Some other random messages:

Tar: Child returned status 2
mv: cannot stat 'spamassasin': No such file or director
tar:Error exit delayed from previous errors
(repeat messages for clamAV)
Thanks again
Reply With Quote
  #4  
Old 14th February 2008, 12:18
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lneburg, Germany
Posts: 36,794
Thanks: 840
Thanked 5,612 Times in 4,423 Posts
Default

Please post the error messages before the line "./setup2: line 873: ispconfig_tmp/php/bin/php: No such file or directory" The relevant error is the first one.

Please make sure that you installed all pacakges as described in the perfect setup guide for your linux distribution.
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
  #5  
Old 13th March 2008, 13:11
hbellmer hbellmer is offline
Junior Member
 
Join Date: Mar 2008
Location: Mainz, Germany
Posts: 14
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via ICQ to hbellmer
Default

Code:
[snip]
ig/compile_aps/php-5.2.5/ext/date/lib -I/tmp/install_ispconfig/compile_aps/php-5.2.5/ext/mbstring/oniguruma -I/tmp/install_ispconfig/compile_aps/php-5.2.5/ext/mbstring/libmbfl -I/tmp/install_ispconfig/compile_aps/php-5.2.5/ext/mbstring/libmbfl/mbfl -I/usr/include/mysql -I/tmp/install_ispconfig/compile_aps/php-5.2.5/TSRM -I/tmp/install_ispconfig/compile_aps/php-5.2.5/Zend    -I/usr/include -g -O2  -prefer-non-pic -c /tmp/install_ispconfig/compile_aps/php-5.2.5/ext/date/lib/parse_date.c -o ext/date/lib/parse_date.lo 

cc1: out of memory allocating 6136320 bytes after a total of 26238976 bytes
make: *** [ext/date/lib/parse_date.lo] Error 1
ERROR: Could not make PHP
cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/aps.tar.gz': No such file or directory
mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
mv: cannot stat `binaries/cronolog': No such file or directory
mv: cannot stat `binaries/cronosplit': No such file or directory
mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
mv: cannot stat `binaries/zip': No such file or directory
mv: cannot stat `binaries/unzip': No such file or directory
tar: spamassassin.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `spamassassin': No such file or directory
tar: uudeview.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `uudeview': No such file or directory
tar: clamav.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `clamav': No such file or directory
tar: aps.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
./setup2: line 873: ispconfig_tmp/php/bin/php: No such file or directory
ERROR: Das mitgelieferte PHP-Binary funktioniert auf Ihrem System nicht! Die Installation bricht hier ab!
I got nearly the same error and i dont want to start a new topic. I tried to install from /root/install_ispconfig AND then i tried from /tmp/install_ispconfig.

I think i got an out of memory error, any suggestions to fix this?

Thanks and greetings from Bremen, Germany
HAnnes
Reply With Quote
  #6  
Old 14th March 2008, 14:26
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,747 Times in 2,578 Posts
Default

Can you post the outputs of
Code:
cat /proc/meminfo
and
Code:
df -h
?
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #7  
Old 14th March 2008, 14:43
hbellmer hbellmer is offline
Junior Member
 
Join Date: Mar 2008
Location: Mainz, Germany
Posts: 14
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via ICQ to hbellmer
Default

Code:
root@v1919:~# cat /proc/meminfo 
MemTotal:      8144612 kB
MemFree:        163124 kB
Buffers:        160364 kB
Cached:        2344392 kB
SwapCached:         84 kB
Active:        6139648 kB
Inactive:       529628 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:      8144612 kB
LowFree:        163124 kB
SwapTotal:    10241428 kB
SwapFree:     10226292 kB
Dirty:            3632 kB
Writeback:           0 kB
Mapped:        5027284 kB
Slab:           984012 kB
CommitLimit:  14313732 kB
Committed_AS: 13557560 kB
PageTables:     142592 kB
VmallocTotal: 536870908 kB
VmallocUsed:    333988 kB
VmallocChunk: 536535960 kB
Code:
Filesystem            Size  Used Avail Use% Mounted on
vzfs                   15G  111M   15G   1% /
tmpfs                 3.9G     0  3.9G   0% /lib/init/rw
tmpfs                 3.9G     0  3.9G   0% /dev/shm
I actually reinstalled my vServer. But i think 15 GB should be enough. I think the 160MB (+160Boost) RAM ist not enough.
Reply With Quote
  #8  
Old 15th March 2008, 18:51
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,747 Times in 2,578 Posts
Default

Your system has 8GB of RAM, that's plenty...
Which ISPConfig version are you trying to install? Which distribution are you using?
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #9  
Old 16th March 2008, 16:04
hbellmer hbellmer is offline
Junior Member
 
Join Date: Mar 2008
Location: Mainz, Germany
Posts: 14
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via ICQ to hbellmer
Default

Its a vServer with 160MB RAM for my machine, think 8GB is for the hole machine.

OS is Debian 4.0 ISPConfig is Version 2.2.21
Reply With Quote
  #10  
Old 17th March 2008, 10:16
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lneburg, Germany
Posts: 36,794
Thanks: 840
Thanked 5,612 Times in 4,423 Posts
 
Default

The problem is most likely that you dont have enough ram and that your vserver is not allowed to have additional swap space.

Its worth a try to free some ram before you try to install ISPConfig. Stop the services that are not nescessary during installation:

apache, bind, postfix, courier (all courier daemons: pop3, pop3s, imap, imaps and the auth daemon) or dovecot, proftpd or vsftpd

and then try to install ispconfig again.
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Broken installation Endymion Installation/Configuration 4 12th October 2007 10:42
ERROR: The PHP binary coming with ISPConfig does not work properly on your system! Th Nilton Godoi Bueno Installation/Configuration 1 26th May 2007 16:31
ERROR: The PHP binary coming with ISPConfig does not work properly on your system! qvindesland Installation/Configuration 22 21st May 2007 17:05
postfix error: unsupported dictionary type: localhost.http: mystix Installation/Configuration 3 9th December 2006 15:23
newbie ububtu 6.0.6 error PHP binary line 816 davidsky73 Installation/Configuration 8 17th September 2006 12:51


All times are GMT +2. The time now is 20:39.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.