#1  
Old 12th May 2008, 22:41
Exilebear Exilebear is offline
Junior Member
 
Join Date: May 2008
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Default Installation Problems

Dear,

I followed the tutorial 'the perfect server - ubuntu 7.10' and i got stuck on the point of installing ISPconfig.
When I am trying the install ISPconfig it gives me the following error:

Quote:
checking module dependencies and their versions...

************************************************** *************************
ERROR: the required Digest::SHA1 module is not installed. at lib/Mail/SpamAssassin/Util/DependencyInfo.pm line 294, <STDIN> line 1.


The Digest::SHA1 module is used as a cryptographic hash for some
tests and the Bayes subsystem. It is also used by Razor2.


************************************************** *************************
ERROR: the required Net::DNS (version 0.34) module is not installed. at lib/Mail/SpamAssassin/Util/DependencyInfo.pm line 294, <STDIN> line 1.


Used for all DNS-based tests (SBL, XBL, SpamCop, DSBL, etc.),
perform MX checks, and is also used when manually reporting spam to
SpamCop.

You need to make sure the Net::DNS version is sufficiently up-to-date:

- version 0.34 or higher on Unix systems
- version 0.46 or higher on Windows systems


************************************************** *************************
NOTE: the optional Mail::SPF module is not installed.

Used to check DNS Sender Policy Framework (SPF) records to fight email
address forgery and make it easier to identify spams. (This is preferred
over Mail::SPF::Query.)


************************************************** *************************
NOTE: the optional Mail::SPF::Query module is not installed.

Used to check DNS Sender Policy Framework (SPF) records to fight email
address forgery and make it easier to identify spams. (Mail::SPF is
preferred instead of this module.)


************************************************** *************************
NOTE: the optional IP::Country module is not installed.

Used by the RelayCountry plugin (not enabled by default) to determine
the domain country codes of each relay in the path of an email.


************************************************** *************************
NOTE: the optional Razor2 (version 2.61) module is not installed.

Used to check message signatures against Vipul's Razor collaborative
filtering network. Razor has a large number of dependencies on CPAN
modules. Feel free to skip installing it, if this makes you nervous;
SpamAssassin will still work well without it.

More info on installing and using Razor can be found
at http://wiki.apache.org/spamassassin/InstallingRazor .


************************************************** *************************
NOTE: the optional Net::Ident module is not installed.

If you plan to use the --auth-ident option to spamd, you will need
to install this module.


************************************************** *************************
NOTE: the optional IO::Socket::INET6 module is not installed.

This is required if the first nameserver listed in your IP
configuration or /etc/resolv.conf file is available only via
an IPv6 address.


************************************************** *************************
NOTE: the optional IO::Socket::SSL module is not installed.

If you wish to use SSL encryption to communicate between spamc and
spamd (the --ssl option to spamd), you need to install this
module. (You will need the OpenSSL libraries and use the
ENABLE_SSL="yes" argument to Makefile.PL to build and run an SSL
compatibile spamc.)


************************************************** *************************
NOTE: the optional Mail::DomainKeys module is not installed.

If this module is installed, and you enable the DomainKeys plugin,
SpamAssassin will perform Domain Key lookups when Domain Key
information is present in the message headers. (Note that new versions
of Mail::DKIM render this module superfluous.)


************************************************** *************************
NOTE: the optional Mail::DKIM module is not installed.

If this module is installed, and you enable the DKIM plugin,
SpamAssassin will perform DKIM lookups when a DKIM-Signature
header is present in the message headers. (New versions of this module
support both Domain Keys and DKIM, rendering Mail::DomainKeys obsolete.)


************************************************** *************************
NOTE: the optional Archive::Tar (version 1.23) module is not installed.

The "sa-update" script requires this module to access tar update
archive files.


************************************************** *************************
NOTE: the optional IO::Zlib (version 1.04) module is not installed.

The "sa-update" script requires this module to access compressed
update archive files.


************************************************** *************************
NOTE: the optional Encode::Detect module is not installed.

If you plan to use the normalize_charset config setting to detect
charsets and convert them into Unicode, you will need to install
this module.

REQUIRED module missing: Digest::SHA1
REQUIRED module missing: Net::DNS
optional module missing: Mail::SPF
optional module missing: Mail::SPF::Query
optional module missing: IP::Country
optional module missing: Razor2
optional module missing: Net::Ident
optional module missing: IO::Socket::INET6
optional module missing: IO::Socket::SSL
optional module missing: Mail::DomainKeys
optional module missing: Mail::DKIM
optional module missing: Archive::Tar
optional module missing: IO::Zlib
optional module missing: Encode::Detect

warning: some functionality may not be available,
please read the above report before continuing!

ERROR: Could not configure SpamAssassin
cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/aps.tar.gz': No such file or directory
mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
mv: cannot stat `binaries/cronolog': No such file or directory
mv: cannot stat `binaries/cronosplit': No such file or directory
mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
mv: cannot stat `binaries/zip': No such file or directory
mv: cannot stat `binaries/unzip': No such file or directory
tar: spamassassin.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `spamassassin': No such file or directory
tar: uudeview.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `uudeview': No such file or directory
tar: clamav.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `clamav': No such file or directory
tar: aps.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
./setup2: line 888: ispconfig_tmp/php/bin/php: No such file or directory
ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!
I'm sorry for the huge amount of text, but this is the only way i can show all the errors.

Can someone please help me, how I can install ISPconfig on Ubuntu 7.10 according to the manual The Perfect Server?
Reply With Quote
Sponsored Links
  #2  
Old 12th May 2008, 22:46
till till is online now
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 35,460
Thanks: 813
Thanked 5,240 Times in 4,108 Posts
Default

You missed to install the perl modules as described in the perfect setup guide (step 20):

apt-get install libhtml-parser-perl libdb-file-lock-perl libnet-dns-perl
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
  #3  
Old 13th May 2008, 08:34
Exilebear Exilebear is offline
Junior Member
 
Join Date: May 2008
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by till
You missed to install the perl modules as described in the perfect setup guide (step 20):

apt-get install libhtml-parser-perl libdb-file-lock-perl libnet-dns-perl
Thank you very much! I managed to get in installed now, but there is a mysql error this time.

Quote:
Warning: mysql_fetch_array(): supplied argument is not a valid MySQL result resource in /root/ispconfig/scripts/lib/config.inc.php on line 47
No results found!FreshClam is already running!
ISPconfig is running, i said it must me reachable at http://www.xyz.de:81 but it is not, when i connect to that address in firefox the only thing I get is an error which indicates that firefox is not able to load the page.

ISPconfig is reachable at https://localhost:81. But I can't login with admin, admin. I think due the mysql error.

Does anyone know how to fix this error?

Edit:
This is is written in the file on line 47:

if(!$go_info["isp"]["server_conf"] = mysql_fetch_array($server_params)){

Last edited by Exilebear; 13th May 2008 at 08:36.
Reply With Quote
  #4  
Old 13th May 2008, 10:42
till till is online now
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 35,460
Thanks: 813
Thanked 5,240 Times in 4,108 Posts
Default

1) Did you create the mysql database for ISPConfig manually, before you installed ISPConfig?
2) Did you use a mysql user with root priveliges for the ispconfig?
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
  #5  
Old 13th May 2008, 13:05
Exilebear Exilebear is offline
Junior Member
 
Join Date: May 2008
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
 
Default

Quote:
Originally Posted by till
1) Did you create the mysql database for ISPConfig manually, before you installed ISPConfig?
2) Did you use a mysql user with root priveliges for the ispconfig?
I created It with a user which has root priveliges. I uninstalled ISPConfig and added the Perl modules which were needed at Stap 20, and reinstalled ISPConfig and it works fine!

I would like to thank everybody who helped me solve my problem.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Ispconfig Installation Problems 2XTREME4U Installation/Configuration 6 21st June 2007 11:43
Problems with installation Golden Installation/Configuration 2 20th October 2006 14:19
Suse 10.0 Installation Problems protocol Installation/Configuration 16 9th February 2006 05:07
DNS problems at installation sdakota Installation/Configuration 0 29th November 2005 19:57
Problems getting through the installation klausagnoletti Installation/Configuration 4 26th September 2005 12:23


All times are GMT +2. The time now is 12:03.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.