Go Back   HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials > Linux Forums > Installation/Configuration

Do you like HowtoForge? Please consider supporting us by becoming a subscriber.
Reply
 
Thread Tools Display Modes
  #1  
Old 11th May 2008, 19:08
miodragz miodragz is offline
Junior Member
 
Join Date: Aug 2007
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
Unhappy Mandriva 2008.1 Spring squealing

When i start browser or other software on Mandriva 2008.1 Spring.I can hear something on the motherboard (Asus P5GPL-X 915) squeal.It is happening only when i m using Mandriva 2008.1 Spring

Last edited by miodragz; 11th May 2008 at 19:19.
Reply With Quote
Sponsored Links
  #2  
Old 12th May 2008, 08:38
miodragz miodragz is offline
Junior Member
 
Join Date: Aug 2007
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Any idea what is it
Reply With Quote
  #3  
Old 12th May 2008, 20:11
falko falko is online now
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 41,711
Thanks: 1,899
Thanked 2,702 Times in 2,545 Posts
Default

Any errors in your logs?
Do you see any errors when you boot the system or in the output of
Code:
dmesg
?
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #4  
Old 14th May 2008, 11:39
miodragz miodragz is offline
Junior Member
 
Join Date: Aug 2007
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Linux version 2.6.24.4-desktop-1mnb (lcapitulino@n5.mandriva.com) (gcc version 4
.2.3 (4.2.3-6mnb1)) #1 SMP Thu Mar 27 14:34:39 CET 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ffb0000 (usable)
BIOS-e820: 000000001ffb0000 - 000000001ffbe000 (ACPI data)
BIOS-e820: 000000001ffbe000 - 000000001fff0000 (ACPI NVS)
BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
found SMP MP-table at 000ff780
Entering add_active_range(0, 0, 130992) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 130992
HighMem 130992 -> 130992
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 130992
On node 0 totalpages: 130992
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 991 pages used for memmap
Normal zone: 125905 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000FB120, 0024 (r2 ACPIAM)
ACPI: XSDT 1FFB0100, 0044 (r1 A M I OEMXSDT 7000508 MSFT 97)
ACPI: FACP 1FFB0290, 00F4 (r3 A M I OEMFACP 7000508 MSFT 97)
ACPI: DSDT 1FFB0400, 6864 (r1 A0318 A0318001 1 INTL 2002026)
ACPI: FACS 1FFBE000, 0040
ACPI: APIC 1FFB0390, 0070 (r1 A M I OEMAPIC 7000508 MSFT 97)
ACPI: OEMB 1FFBE040, 0046 (r1 A M I AMI_OEM 7000508 MSFT 97)
ACPI: MCFG 1FFB6C70, 003C (r1 A M I OEMMCFG 7000508 MSFT 97)
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 20
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 20000000:dfb80000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000
swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129969
Kernel command line: BOOT_IMAGE=linux root=UUID=fd4bb919-4142-4953-bd12-b851fd12
2760 resume=/dev/sda7 splash=silent vga=788
bootsplash: silent mode.
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 3010.764 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 511696k/523968k available (2322k kernel code, 11240k reserved, 790k data
, 292k init, 0k highmem, 0k BadRAM)
virtual kernel memory layout:
fixmap : 0xffe14000 - 0xfffff000 (1964 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
lowmem : 0xc0000000 - 0xdffb0000 ( 511 MB)
.init : 0xc0412000 - 0xc045b000 ( 292 kB)
.data : 0xc03448f7 - 0xc040a2a4 ( 790 kB)
.text : 0xc0100000 - 0xc03448f7 (2322 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Calibrating delay using timer specific routine.. 6024.72 BogoMIPS (lpj=3012364)
Security Framework initialized
AppArmor: AppArmor disabled by boottime parameter

Capability LSM initialized
Mount-cache hash table entries: 512
Hook version: 2.6.24 2008/01/25
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000649d
00000000 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 20000000 00000000 0000b180 0000649d 0000000
0 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU0: Thermal monitoring enabled
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Early unpacking initramfs... done
Freeing initrd memory: 2756k freed
ACPI: Core revision 20070126
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 6020.48 BogoMIPS (lpj=3010243)
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000649d
00000000 00000000 00000000
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 20000000 00000000 0000b180 0000649d 0000000
0 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
Total of 2 processors activated (12045.21 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
net_namespace: 64 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 11, should be
0C [20070126]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 17 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
ACPI: RTC can wake from S4
Time: tsc clocksource has been installed.
system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
system 00:07: ioport range 0x290-0x297 has been reserved
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
system 00:08: ioport range 0x800-0x87f has been reserved
system 00:08: ioport range 0x400-0x41f has been reserved
system 00:08: ioport range 0x480-0x4bf has been reserved
system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
system 00:08: iomem range 0xfff80000-0xffffffff could not be reserved
system 00:0a: iomem range 0xffc00000-0xfff7ffff could not be reserved
system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0f: iomem range 0xe0000000-0xefffffff has been reserved
system 00:10: iomem range 0x0-0x9ffff could not be reserved
system 00:10: iomem range 0x0-0x0 could not be reserved
system 00:10: iomem range 0xe0000-0xfffff could not be reserved
system 00:10: iomem range 0x100000-0x1fffffff could not be reserved
system 00:10: iomem range 0x0-0x0 could not be reserved
PCI: Bridge: 0000:00:01.0
IO window: e000-efff
MEM window: cdf00000-cfffffff
PREFETCH window: d0000000-dfffffff
PCI: Bridge: 0000:00:1c.0
IO window: d000-dfff
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: c000-cfff
MEM window: cde00000-cdefffff
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
audit(1210764945.349:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:03:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0cie00]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0cie00]
Allocate Port Service[0000:00:1c.0cie02]
vesafb: framebuffer at 0xd0000000, mapped to 0xe0880000, using 3750k, total 1310
72k
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: protected mode interface info at c000:d390
vesafb: pmi: set display start = c00cd3c6, set palette = c00cd430
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0
3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 216280 by
tes,<6>...found (800x600, 216184 bytes, v3).
Console: switching to colour frame buffer device 91x30
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot wi
th i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 1
Using IPI No-Shortcut mode
registered taskstats version 1
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
Freeing unused kernel memory: 292k freed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 17, io mem 0xcddffc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 17, io base 0x00009000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 18, io base 0x00009400
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 19, io base 0x00009800
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 2-2: new low speed USB device using uhci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000a000
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
usb 2-2: configuration #1 chosen from 1 choice
hub 5-0:1.0: 2 ports detected
SCSI subsystem initialized
Driver 'sd' needs updating - please use bus_type methods
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.12
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata1.00: ATAPI: HL-DT-STDVD-ROM GDR8164B, 0L06, max UDMA/33
ata1.01: ATAPI: MAD DOG MD-16X3DVD9-8X, 1.F3, max UDMA/33
ata1.00: configured for UDMA/33
ata1.01: configured for UDMA/33
scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8164B 0L06 PQ: 0 ANSI: 5
scsi 0:0:1:0: CD-ROM MAD DOG MD-16X3DVD9-8X 1.F3 PQ: 0 ANSI: 5
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xb800 ctl 0xb400 bmdma 0xa400 irq 18
ata4: SATA max UDMA/133 cmd 0xb000 ctl 0xa800 bmdma 0xa408 irq 18
ata3.00: ATA-7: Maxtor 6L120M0, BACE1G10, max UDMA/133
ata3.00: 240121728 sectors, multi 16: LBA NCQ (depth 0/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA Maxtor 6L120M0 BACE PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 240121728 512-byte hardware sectors (122942 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sd 2:0:0:0: [sda] 240121728 512-byte hardware sectors (122942 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
sd 2:0:0:0: [sda] Attached SCSI disk
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
bootsplash: status on console 0 changed to on
swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Not activating Mandatory Access Control now since /sbin/ccs-init doesn't exist.
scsi 0:0:0:0: Attached scsi generic sg0 type 5
scsi 0:0:1:0: Attached scsi generic sg1 type 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
Linux agpgart interface v0.102
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
ACPI: SSDT 1FFB6CB0, 02FC (r1 AMI CPU1PM 1 INTL 2002026)
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI Warning (tbutils-0217): Incorrect checksum in table [SSDT] - ED, should be
F7 [20070126]
ACPI: SSDT 1FFB6FB0, 02FC (r1 AMI CPU2PM 1 INTL 2002026)
input: Power Button (FF) as /class/input/input1
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input2
ACPI: Power Button (CM) [PWRB]
usbcore: registered new interface driver hiddev
input: HID 04d9:1133 as /class/input/input3
input,hidraw0: USB HID v1.10 Mouse [HID 04d9:1133] on usb-0000:00:1d.0-2
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
usbcore: registered new interface driver usbmouse
drivers/hid/usbhid/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 19 (level, low) -> IRQ 18
Driver 'sr' needs updating - please use bus_type methods
e1000: 0000:01:03.0: e1000_probe: (PCI:33MHz:32-bit) 00:13:d4:a5:2e:a3
sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
sr 0:0:1:0: Attached scsi CD-ROM sr1
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:01:09.0[A] -> GSI 17 (level, low) -> IRQ 20
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month
input: PC Speaker as /class/input/input4
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP
,DMA]
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
floppy0: no floppy controllers found
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
EXT3 FS on sda6, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
loop: module loaded
Adding 1630556k swap on /dev/sda7. Priority:-1 extents:1 across:1630556k
nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
NET: Registered protocol family 17
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control:
RX/TX
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
fuse init (API version 7.9)
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:03:00.0 to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 200 8
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 b ytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 b ytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 b ytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 b ytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 b ytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 b ytes, v3).
bootsplash: status on console 5 changed to on
eth0: no IPv6 routers present
st: Version 20070203, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
Reply With Quote
  #5  
Old 15th May 2008, 18:58
falko falko is online now
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 41,711
Thanks: 1,899
Thanked 2,702 Times in 2,545 Posts
Default

Hm, I don't see any problems, so I'm not sure why this is happening...
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #6  
Old 17th May 2008, 23:28
miodragz miodragz is offline
Junior Member
 
Join Date: Aug 2007
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
Default next logs

some logs falco
/var/log/deamons/warnings.log

May 14 11:36:14 localhost ifplugd(eth0)[3572]: client: Determining IP information for eth0... done.
May 14 11:36:16 localhost avahi-daemon[4113]: System host name is set to 'localhost'. This is not a suitable mDNS host name, looking for alternatives.
May 15 09:13:14 localhost ifplugd(eth0)[3482]: client: Determining IP information for eth0... done.
May 15 09:13:16 localhost avahi-daemon[4050]: System host name is set to 'localhost'. This is not a suitable mDNS host name, looking for alternatives.
May 15 11:13:21 localhost ifplugd(eth0)[3468]: client: Determining IP information for eth0... done.
May 15 11:13:22 localhost avahi-daemon[4054]: System host name is set to 'localhost'. This is not a suitable mDNS host name, looking for alternatives.
May 16 09:43:41 localhost ifplugd(eth0)[3466]: client: Determining IP information for eth0... done.
May 16 09:43:43 localhost avahi-daemon[3946]: System host name is set to 'localhost'. This is not a suitable mDNS host name, looking for alternatives.
May 16 09:49:44 localhost ifplugd(eth0)[3466]: client: Determining IP information for eth0... failed.
May 16 10:46:27 localhost ifplugd(eth0)[13300]: client: Determining IP information for eth0... done.
May 16 11:00:04 localhost ifplugd(eth0)[13300]: client: Determining IP information for eth0... done.
May 16 11:01:49 localhost ifplugd(eth0)[3424]: client: Determining IP information for eth0... done.
May 16 11:01:51 localhost avahi-daemon[3987]: System host name is set to 'localhost'. This is not a suitable mDNS host name, looking for alternatives.
May 16 11:04:12 localhost ifplugd(eth0)[3424]: Killing child.
May 16 11:04:18 localhost ifplugd(eth0)[3424]: client: Determining IP information for eth0...
May 16 11:05:42 localhost ifplugd(eth0)[6689]: client: Determining IP information for eth0... done.
May 16 21:56:36 localhost ifplugd(eth0)[6689]: client: Determining IP information for eth0... done.
May 17 00:50:54 localhost avahi-daemon[4288]: System host name is set to 'localhost'. This is not a suitable mDNS host name, looking for alternatives.
May 17 00:52:02 localhost ifplugd(eth0)[3444]: Killing child.
May 17 00:52:08 localhost ifplugd(eth0)[3444]: client: Determining IP information for eth0...
May 17 00:55:10 localhost ifplugd(eth0)[5419]: Killing child.
May 17 00:55:12 localhost ifplugd(eth0)[5419]: client: Determining IP information for eth0...
May 17 00:55:32 localhost ifplugd(eth0)[6094]: Killing child.
May 17 00:55:38 localhost ifplugd(eth0)[6094]: client: Determining IP information for eth0...
May 17 00:59:56 localhost ifplugd(eth0)[6973]: client: Determining IP information for eth0... done.

/var/log/kernel errors.log


May 14 11:36:08 localhost kernel: PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
May 14 11:36:08 localhost kernel: PCI: Not using MMCONFIG.
May 15 09:13:08 localhost kernel: PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
May 15 09:13:08 localhost kernel: PCI: Not using MMCONFIG.
May 15 09:16:39 localhost kernel: sd 4:0:0:0: [sdb] Assuming drive cache: write through
May 15 09:16:39 localhost kernel: sd 4:0:0:0: [sdb] Assuming drive cache: write through
May 15 11:13:12 localhost kernel: PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
May 15 11:13:13 localhost kernel: PCI: Not using MMCONFIG.
May 15 11:13:13 localhost kernel: sd 4:0:0:0: [sdb] Assuming drive cache: write through
May 15 11:13:13 localhost kernel: sd 4:0:0:0: [sdb] Assuming drive cache: write through
May 15 12:38:57 localhost kernel: sd 5:0:0:0: [sdb] Assuming drive cache: write through
May 16 09:43:34 localhost kernel: PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
May 16 09:43:35 localhost kernel: PCI: Not using MMCONFIG.
May 16 11:01:41 localhost kernel: PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
May 16 11:01:41 localhost kernel: PCI: Not using MMCONFIG.
May 17 00:50:29 localhost kernel: PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
May 17 00:50:29 localhost kernel: PCI: Not using MMCONFIG.
Reply With Quote
  #7  
Old 17th May 2008, 23:41
miodragz miodragz is offline
Junior Member
 
Join Date: Aug 2007
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
 
Default

/var/log/kernel/ warning.log in atachment
Attached Files
File Type: txt warninglog.txt (44.7 KB, 287 views)
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
ISPConfig migration to new server. cambo Installation/Configuration 11 4th July 2013 22:10
Mandriva Linux One 2008 Spring on Dell XPS M1530 mrigs Installation/Configuration 3 8th May 2008 21:32
Postfix: connection refused error tosin Server Operation 1 30th October 2007 17:30
Request - Laptop battery monitor in Mandriva 2007 spring TimeStamp Desktop Operation 6 13th July 2007 04:45
Mandriva Linux Free 2007 Spring stalls at boot johnwillyums HOWTO-Related Questions 5 14th May 2007 17:20


All times are GMT +2. The time now is 09:54.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.