Go Back   HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials > ISPConfig 2 > Installation/Configuration

Do you like HowtoForge? Please consider supporting us by becoming a subscriber.
Reply
 
Thread Tools Display Modes
  #1  
Old 16th January 2006, 11:33
jf1976 jf1976 is offline
Junior Member
 
Join Date: Jan 2006
Posts: 17
Thanks: 0
Thanked 0 Times in 0 Posts
Default Debian install error

hi all,

i've followed the guide at http://www.howtoforge.com/perfect_setup_debian_sarge on a fresh install then followed the guide at http://www.ispconfig.org/manual_installation.htm but am unable to get ISP Config to complete its setup process.

i get the following errors in /var/log/ispconfig_install.log

Fri Jan 1 17:37:42 GMT 1988 - [ISPConfig] - installation directory: /tmp/install_ispconfig
Fri Jan 1 17:37:42 GMT 1988 - [ISPConfig] - operating system: Debian 3.1
Fri Jan 1 17:37:45 GMT 1988 - [ISPConfig] - Neuinstallation eines ISPConfig-Systems. / Installation of a new ISPConfig system. / Installation d'ISPConfig sur un nouveau système.
Fri Jan 1 17:37:49 GMT 1988 - [ISPConfig] - selected language: en
Fri Jan 1 17:37:54 GMT 1988 - [ISPConfig] - installation note accepted
Fri Jan 1 17:37:58 GMT 1988 - [ISPConfig] - licence accepted
Fri Jan 1 17:38:02 GMT 1988 - [ISPConfig] - installation mode: standard
Fri Jan 1 17:38:07 GMT 1988 - [ISPConfig] - mail: postfix
Fri Jan 1 17:38:07 GMT 1988 - [ISPConfig] - dist_mail=postfix ##
Fri Jan 1 17:38:07 GMT 1988 - [ISPConfig] - dist_mail_log=/var/log/mail.log ##
Fri Jan 1 17:38:07 GMT 1988 - [ISPConfig] - dist_mail_virtusertable=/etc/postfix/virtusertable ##
Fri Jan 1 17:38:07 GMT 1988 - [ISPConfig] - dist_mail_local_host_names=/etc/postfix/local-host-names ##
Fri Jan 1 17:38:17 GMT 1988 - [ISPConfig] - ftp: proftpd
Fri Jan 1 17:38:17 GMT 1988 - [ISPConfig] - dist_ftp=proftpd ##
Fri Jan 1 17:38:17 GMT 1988 - [ISPConfig] - dist_ftp_conf=/etc/proftpd.conf ##
Fri Jan 1 17:38:17 GMT 1988 - [ISPConfig] - dist_ftp_version=standalone ##
Fri Jan 1 17:38:17 GMT 1988 - [ISPConfig] - dist_ftp_log=/var/log/xferlog ##
Fri Jan 1 17:38:17 GMT 1988 - [ISPConfig] - procmail found: /usr/bin/procmail
Fri Jan 1 17:38:17 GMT 1988 - [ISPConfig] - quota found: /usr/bin/quota
Fri Jan 1 17:38:17 GMT 1988 - [ISPConfig] - mysql found: /usr/bin/mysql
Fri Jan 1 17:38:17 GMT 1988 - [ISPConfig] - openssl found: /usr/bin/openssl
Fri Jan 1 17:38:17 GMT 1988 - [ISPConfig] - named found: /usr/sbin/named
Fri Jan 1 17:38:17 GMT 1988 - [ISPConfig] - iptables found: /sbin/iptables
Fri Jan 1 17:38:18 GMT 1988 - [ISPConfig] - httpd found: /usr/bin/httpd
Fri Jan 1 17:38:18 GMT 1988 - [ISPConfig] - httpd syntax ok!
Fri Jan 1 17:38:18 GMT 1988 - [ISPConfig] - dist_path_httpd_root=/home/www ##
Fri Jan 1 17:38:22 GMT 1988 - [ISPConfig] - Directory /var/www/sharedip created.
Fri Jan 1 17:38:22 GMT 1988 - [ISPConfig] - Use sharedip_index.html_en as SharedIP default page.
Fri Jan 1 17:38:41 GMT 1988 - [ISPConfig] - WARNING: could not unpack ISPConfig system
Fri Jan 1 17:38:41 GMT 1988 - [ISPConfig] - ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!

i am unsure how to continue with the installation and i have been unable to find a solution in the locations i have searched, please could someone help me fix this.

thanks in advanced.
Reply With Quote
Sponsored Links
  #2  
Old 16th January 2006, 12:15
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 36,034
Thanks: 826
Thanked 5,383 Times in 4,230 Posts
Default

There must be some errors during the compililation of the PHP binaries. Please post these errors here.

If you want to run the setup script again, please delete:

rm -rf /root/ispconfig
rm -rf /home/admispconfig

and the install_ispconfig directory, unpack the ispconfig tar.gz file again and run the setup script.
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
  #3  
Old 16th January 2006, 14:39
jf1976 jf1976 is offline
Junior Member
 
Join Date: Jan 2006
Posts: 17
Thanks: 0
Thanked 0 Times in 0 Posts
Default this is what i get on screen

Operating system: i686-whatever-linux2
Configuring for linux-elf
Configuring for linux-elf
no-gmp [default] OPENSSL_NO_GMP (skip dir)
no-krb5 [krb5-flavor not specified] OPENSSL_NO_KRB5
no-mdc2 [default] OPENSSL_NO_MDC2 (skip dir)
no-rc5 [default] OPENSSL_NO_RC5 (skip dir)
no-shared [default]
no-zlib [default]
no-zlib-dynamic [default]
IsMK1MF=0
CC =gcc
CFLAG =-DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DOPENSSL_BN_ASM_PART_WORDS -DOPENSSL_IA32_SSE2 -DSHA1_ASM -DMD5_ASM -DRMD160_ASM -DAES_ASM
EX_LIBS =-ldl
CPUID_OBJ =x86cpuid-elf.o
BN_ASM =bn86-elf.o co86-elf.o
DES_ENC =dx86-elf.o yx86-elf.o
AES_ASM_OBJ =ax86-elf.o
BF_ENC =bx86-elf.o
CAST_ENC =cx86-elf.o
RC4_ENC =rx86-elf.o
RC5_ENC =r586-elf.o
MD5_OBJ_ASM =mx86-elf.o
SHA1_OBJ_ASM =sx86-elf.o s512sse2-elf.o
RMD160_OBJ_ASM=rm86-elf.o
PROCESSOR =
RANLIB =/usr/bin/ranlib
ARFLAGS =
PERL =/usr/bin/perl
THIRTY_TWO_BIT mode
DES_PTR used
DES_RISC1 used
DES_UNROLL used
BN_LLONG mode
RC4_INDEX mode
RC4_CHUNK is undefined
make: Warning: File `Makefile.org' has modification time 5.5e+08 s in the future
Makefile is older than Makefile.org, Configure or config.
Reconfigure the source tree (via './config' or 'perl Configure'), please.
make: *** [Makefile] Error 1
make: Warning: File `Makefile.org' has modification time 5.5e+08 s in the future
Makefile is older than Makefile.org, Configure or config.
Reconfigure the source tree (via './config' or 'perl Configure'), please.
make: *** [Makefile] Error 1
ERROR: Could not make OpenSSL
cd: could not get current directory: getcwd: cannot access parent directories: No such file or directory
cd: could not get current directory: getcwd: cannot access parent directories: No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/aps.tar.gz': No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
mv: cannot stat `binaries/cronolog': No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/cronosplit': No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/zip': No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/unzip'job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
: No such file or directory
tar: spamassassin.tar.gz: Cannot openjob-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `spamassassin': No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
tar: uudeview.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `uudeview': No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
tar: clamav.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `clamav': No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
tar: aps.tar.gz: Cannot openjob-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
./setup2: line 771: ispconfig_tmp/php/bin/php: No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory

and the two locations you ref to are not created!
Reply With Quote
  #4  
Old 16th January 2006, 15:22
jf1976 jf1976 is offline
Junior Member
 
Join Date: Jan 2006
Posts: 17
Thanks: 0
Thanked 0 Times in 0 Posts
Default

i have also tried

./setup --with-ssl=/usr/bin/openssl

to corrert the OpenSSL error but i still get errors

Operating system: i686-whatever-linux2
Configuring for linux-elf
Configuring for linux-elf
no-gmp [default] OPENSSL_NO_GMP (skip dir)
no-krb5 [krb5-flavor not specified] OPENSSL_NO_KRB5
no-mdc2 [default] OPENSSL_NO_MDC2 (skip dir)
no-rc5 [default] OPENSSL_NO_RC5 (skip dir)
no-shared [default]
no-zlib [default]
no-zlib-dynamic [default]
IsMK1MF=0
CC =gcc
CFLAG =-DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DOPENSSL_BN_ASM_PART_WORDS -DOPENSSL_IA32_SSE2 -DSHA1_ASM -DMD5_ASM -DRMD160_ASM -DAES_ASM
EX_LIBS =-ldl
CPUID_OBJ =x86cpuid-elf.o
BN_ASM =bn86-elf.o co86-elf.o
DES_ENC =dx86-elf.o yx86-elf.o
AES_ASM_OBJ =ax86-elf.o
BF_ENC =bx86-elf.o
CAST_ENC =cx86-elf.o
RC4_ENC =rx86-elf.o
RC5_ENC =r586-elf.o
MD5_OBJ_ASM =mx86-elf.o
SHA1_OBJ_ASM =sx86-elf.o s512sse2-elf.o
RMD160_OBJ_ASM=rm86-elf.o
PROCESSOR =
RANLIB =/usr/bin/ranlib
ARFLAGS =
PERL =/usr/bin/perl
THIRTY_TWO_BIT mode
DES_PTR used
DES_RISC1 used
DES_UNROLL used
BN_LLONG mode
RC4_INDEX mode
RC4_CHUNK is undefined
make: Warning: File `Makefile.org' has modification time 5.5e+08 s in the future
Makefile is older than Makefile.org, Configure or config.
Reconfigure the source tree (via './config' or 'perl Configure'), please.
make: *** [Makefile] Error 1
make: Warning: File `Makefile.org' has modification time 5.5e+08 s in the future
Makefile is older than Makefile.org, Configure or config.
Reconfigure the source tree (via './config' or 'perl Configure'), please.
make: *** [Makefile] Error 1
ERROR: Could not make OpenSSL
cd: could not get current directory: getcwd: cannot access parent directories: No such file or directory
cd: could not get current directory: getcwd: cannot access parent directories: No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/aps.tar.gz': No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
mv: cannot stat `binaries/cronolog': No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/cronosplit': No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/zip': No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/unzip'job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
: No such file or directory
tar: spamassassin.tar.gz: Cannot openjob-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `spamassassin': No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
tar: uudeview.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `uudeview': No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
tar: clamav.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `clamav': No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
tar: aps.tar.gz: Cannot openjob-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
./setup2: line 771: ispconfig_tmp/php/bin/php: No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
Reply With Quote
  #5  
Old 16th January 2006, 17:33
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 36,034
Thanks: 826
Thanked 5,383 Times in 4,230 Posts
Default

Quote:
Originally Posted by jf1976

./setup --with-ssl=/usr/bin/openssl
The setup script does not support parameters.

The problem you encounter is that the date and time on your server are incorrect (in the future).

Set date and time to correct values, delete the directories from the broken install and run setup again.
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
  #6  
Old 16th January 2006, 19:17
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,741 Times in 2,575 Posts
Default

To update your system time, run this command:
Code:
/usr/sbin/rdate 128.2.136.71
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #7  
Old 17th January 2006, 15:25
jf1976 jf1976 is offline
Junior Member
 
Join Date: Jan 2006
Posts: 17
Thanks: 0
Thanked 0 Times in 0 Posts
Default setting the time & date worked

thanks for the advice, the install went great after correcting the time & date.

Q). How do you get diffrent virtual hosts on diffrent ip's ?

thanks
Reply With Quote
  #8  
Old 17th January 2006, 16:25
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 36,034
Thanks: 826
Thanked 5,383 Times in 4,230 Posts
Default

Add additional IP addresses in ISPConfig under management > server > settings in the additional IP's field. One IP per line.

Then you can select these IP#s when you create a new website.
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
  #9  
Old 17th January 2006, 19:30
jf1976 jf1976 is offline
Junior Member
 
Join Date: Jan 2006
Posts: 17
Thanks: 0
Thanked 0 Times in 0 Posts
Thumbs up thanks

thanks thats great, but i seam to have got an error now

Quote:
The name main.xxxxx.xxxxx-xxx.xxx is already in use by another site or domain.
but i have delete the site and removed the trash? how do i clear the cache or what do i need to do.

thanks again

----EDIT

Fixed... logout login?

things are working a bit better now thanks.

i now have:

sample.DNYDNS.DOMAIN.NET
sample2.DNYDNS.DOMAIN.NET

last question

when i goto DNYDNS.DOMAIN.NET it always goes to SAMPLE.DNYDNS.DOMAIN.NET not the default doc root? how can i stop this? as i want the host as the main site and the other 2 as diffrent sites.

thanks

Last edited by jf1976; 17th January 2006 at 19:59.
Reply With Quote
  #10  
Old 17th January 2006, 20:20
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 36,034
Thanks: 826
Thanked 5,383 Times in 4,230 Posts
 
Default

Quote:
Originally Posted by jf1976
when i goto DNYDNS.DOMAIN.NET it always goes to SAMPLE.DNYDNS.DOMAIN.NET not the default doc root? how can i stop this? as i want the host as the main site and the other 2 as diffrent sites.
Can you please explain this a bit more.

Have you created awebsite DNYDNS.DOMAIN.NET and SAMPLE.DNYDNS.DOMAIN.NET in ISPConfig? What do you mean with default doc root. /var/www or the web directory of a ISPConfig website?
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Installation Fails... :( cyberstorm Installation/Configuration 1 15th January 2006 18:07
ISP install problems Debian sarge 3.1 lerra Installation/Configuration 1 5th January 2006 16:37
2.6.12 debian install problems s2angel Installation/Configuration 6 31st December 2005 13:21
e-mail problem!!! Debian 3.1 maroonworks Installation/Configuration 18 6th December 2005 14:42
Could not make OpenSSL yontengyatso Installation/Configuration 3 3rd November 2005 10:50


All times are GMT +2. The time now is 08:09.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.