#1  
Old 22nd February 2008, 03:27
k0d1 k0d1 is offline
Junior Member
 
Join Date: Feb 2008
Posts: 11
Thanks: 3
Thanked 0 Times in 0 Posts
Default Could not setup DNS

Could not setup zone tapiart.ru
In result of DNS Setup using ISPConfig on SuSE 10.3 I've got:
named.conf
Code:
options {
        pid-file "/var/lib/named/var/run/named/named.pid";
        directory "/var/lib/named";
        auth-nxdomain no;
        /*
         * If there is a firewall between you and nameservers you want
         * to talk to, you might need to uncomment the query-source
         * directive below.  Previous versions of BIND always asked
         * questions using port 53, but BIND 8.1 uses an unprivileged
         * port by default.
         */
        // query-source address * port 53;
};

//
// a caching only nameserver config
//
zone "." {
        type hint;
        file "root.hint";
};

zone "0.0.127.in-addr.arpa" {
        type master;
        file "127.0.0.zone";
};

zone "199.10.85.in-addr.arpa" {
        type master;
        file "pri.199.10.85.in-addr.arpa";
};


zone "tapiart.ru" {
        type master;
        file "pri.tapiart.ru";
};


zone "slave.tapiart.ru" {
        type slave;
        file "sec.slave.tapiart.ru";
        masters { 78.47.81.198; };
};
pri.tapiart.ru
Code:
$TTL        86400
@       IN      SOA     78.47.81.198. k0d1.inimatic.com. (
                        2008021902       ; serial, todays date + todays serial #
                        28800              ; refresh, seconds
                        7200              ; retry, seconds
                        604800              ; expire, seconds
                        86400 )            ; minimum, seconds
;
                NS      78.47.81.198.              ; Inet Address of name server 1
                NS      78.47.81.199.              ; Inet Address of name server 2
;

tapiart  MX      10 tapiart.ru.

tapiart.ru.      A        85.10.199.145
tapiart       A       85.10.199.145
www.tapiart.ru.       TXT  "v=spf1 a mx ptr ~all"
log messages
Code:
: starting BIND 9.4.1-P1 -t /var/lib/named -u named
: found 1 CPU, using 1 worker thread
: loading configuration from '/etc/named.conf'
: listening on IPv4 interface lo, 127.0.0.1#53
: listening on IPv4 interface eth0, 85.10.199.145#53
: listening on IPv4 interface eth0, 78.47.81.198#53
: listening on IPv4 interface eth0, 78.47.81.199#53
: automatic empty zone: 127.IN-ADDR.ARPA
: automatic empty zone: 254.169.IN-ADDR.ARPA
: automatic empty zone: 2.0.192.IN-ADDR.ARPA
: automatic empty zone: 255.255.255.255.IN-ADDR.ARPA
: automatic empty zone: 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.
: automatic empty zone: 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.
: automatic empty zone: D.F.IP6.ARPA
: automatic empty zone: 8.E.F.IP6.ARPA
: automatic empty zone: 9.E.F.IP6.ARPA
: automatic empty zone: A.E.F.IP6.ARPA
: automatic empty zone: B.E.F.IP6.ARPA
: command channel listening on 127.0.0.1#953
: command channel listening on ::1#953
: zone 0.0.127.in-addr.arpa/IN: loaded serial 42
: zone 199.10.85.in-addr.arpa/IN: loaded serial 2008021901
: zone tapiart.ru/IN: loaded serial 2008021902
: running
: zone tapiart.ru/IN: sending notifies (serial 2008021902)
: zone 199.10.85.in-addr.arpa/IN: sending notifies (serial 2008021901)
: checkhints: L.ROOT-SERVERS.NET/A (199.7.83.42) missing from hints
: checkhints: L.ROOT-SERVERS.NET/A (198.32.64.12) extra record in hints
: zone slave.tapiart.ru/IN: refresh: unexpected rcode (SERVFAIL) from master 78.47.81.198
Question tapiart.ru has no Answer.
Code:
openSUSE-103-32-minimal:/var/lib/named # dig tapiart.ru

; <<>> DiG 9.4.1-P1 <<>> tapiart.ru
;; global options:  printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 31029
;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0

;; QUESTION SECTION:
;tapiart.ru.                    IN      A

;; Query time: 123 msec
;; SERVER: 213.133.98.98#53(213.133.98.98)
;; WHEN: Tue Feb 19 21:54:23 2008
;; MSG SIZE  rcvd: 28

Last edited by k0d1; 22nd February 2008 at 13:33.
Reply With Quote
Sponsored Links
  #2  
Old 22nd February 2008, 12:32
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 37,015
Thanks: 840
Thanked 5,652 Times in 4,461 Posts
Default

Did you configure your dns server as described in the perfect setup guide for OpenSuSE?

Also, are these lines really in the named.conf file or are they artefacts from copying to the forum:

named.conf [----] 0 L:[ 19+30 49/ 49] *(1041/1041b)= <EOF>
type hint;
file "root.hint";
};
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
  #3  
Old 22nd February 2008, 13:41
k0d1 k0d1 is offline
Junior Member
 
Join Date: Feb 2008
Posts: 11
Thanks: 3
Thanked 0 Times in 0 Posts
Default DNS was setup as described in the perfect setup guide for OpenSuSE

Hello Till. Thank for your attention.
1. DNS was setup as described in the perfect setup guide for OpenSuSE and admin manual.
Everyting looks good but it has no DNS answer...
I spend a day trying to fix it.

2. I correct my copy/past named.conf content in first message. As You can see in loga messages there is no error: "zone tapiart.ru/IN: loaded serial 2008021902".

3. I obtain my mistake in dig command. The right is dig @78.47.81.198 tapiart.ru. So I get the answer.

Last edited by k0d1; 22nd February 2008 at 17:42.
Reply With Quote
  #4  
Old 23rd February 2008, 17:58
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,751 Times in 2,581 Posts
 
Default

It's working for me:

Code:
mh1:~# dig tapiart.ru

; <<>> DiG 9.3.4 <<>> tapiart.ru
;; global options:  printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 35106
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0

;; QUESTION SECTION:
;tapiart.ru.                    IN      A

;; ANSWER SECTION:
tapiart.ru.             86400   IN      A       85.10.199.145

;; Query time: 71 msec
;; SERVER: 213.191.92.84#53(213.191.92.84)
;; WHEN: Sat Feb 23 16:58:19 2008
;; MSG SIZE  rcvd: 44

mh1:~#
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
The Following User Says Thank You to falko For This Useful Post:
k0d1 (23rd February 2008)
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
dns setup questions bennyhill Server Operation 1 14th August 2007 15:36
DNS Configuration Problems VMartins Installation/Configuration 10 24th July 2007 15:40
Unable send receive emails vassilis3 Installation/Configuration 15 19th May 2007 15:34
FC4 Setup DNS and ISPCONFIG issues The General Installation/Configuration 7 15th May 2006 10:45
Help with DNS configuration (understanding DNS setup) jimjawn Installation/Configuration 1 3rd May 2006 16:43


All times are GMT +2. The time now is 13:44.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.