#1  
Old 13th February 2008, 18:19
cgreentx cgreentx is offline
Junior Member
 
Join Date: Jul 2007
Posts: 10
Thanks: 2
Thanked 0 Times in 0 Posts
Default Issues with compiling on FC8

I've seen this error for a thousand different reasons on this board, but none of the solutions have worked for me. I have followed the howtoforge guide for installation with one caveat... The box is hosted so I don't know what packages were loaded in the beginning through the GUI package manager. I've built a dozen of these on Debian without issue so this is a bit frustrating. I receive the following during the compile process after which the entire install_ispconfig folder is empty. Any ideas?

-------------
configure: ClamAV version 0.92 detected.
configure: Using scanner /home/admispconfig/ispconfig/tools/clamav/bin/clamscan
configure: Using scanner options --no-summary --stdout
configure: Using virus signature file dir /home/admispconfig/ispconfig/tools/clamav/share/clamav
configure: Signature version reporting is off.
configure: Scanner name adding is on.
configure: Using temporary directory /tmp
configure: Subject header rewriting is off.
configure: creating ./config.status
config.status: creating clamassassin
config.status: creating Makefile
cp -f clamassassin /home/admispconfig/ispconfig/tools/clamav/bin
chmod 555 /home/admispconfig/ispconfig/tools/clamav/bin/clamassassin
Can't locate ExtUtils/MakeMaker.pm in @INC (@INC contains: /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7 /usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 .) at Makefile.PL line 8.
BEGIN failed--compilation aborted at Makefile.PL line 8.
ERROR: Could not configure SpamAssassin
cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/aps.tar.gz': No such file or directory
mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
mv: cannot stat `binaries/cronolog': No such file or directory
mv: cannot stat `binaries/cronosplit': No such file or directory
mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
mv: cannot stat `binaries/zip': No such file or directory
mv: cannot stat `binaries/unzip': No such file or directory
tar: spamassassin.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `spamassassin': No such file or directory
tar: uudeview.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `uudeview': No such file or directory
tar: clamav.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `clamav': No such file or directory
tar: aps.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
./setup2: line 873: ispconfig_tmp/php/bin/php: No such file or directory
ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!
----------------

Anyone?

Thanks!
Chris Green
Reply With Quote
Sponsored Links
  #2  
Old 14th February 2008, 11:32
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 34,592
Thanks: 792
Thanked 4,983 Times in 3,903 Posts
Default

Quote:
I've seen this error for a thousand different reasons on this board, but none of the solutions have worked for me.
You will have to look at the first error, not at the last error. Thats why you find so many posts for the last error message, as this is always printed out if a error occured before.

In your case, the relevant error message is:

Quote:
Can't locate ExtUtils/MakeMaker.pm
This means that the perl package ExtUtils::MakeMaker is missing.

Have a look at this thread:

http://www.howtoforge.com/forums/sho...2FMakeMaker.pm
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
  #3  
Old 17th February 2008, 19:46
cgreentx cgreentx is offline
Junior Member
 
Join Date: Jul 2007
Posts: 10
Thanks: 2
Thanked 0 Times in 0 Posts
 
Default

It took some digging to find the right package name but that got me where I needed to be. I'm trying to figure out why my users can't log into FTP now, but that's a different issue entirely.

Thanks!

Chris Green
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Ubuntu Mail Server issues (warning: a long list!) klonos HOWTO-Related Questions 3 6th October 2007 14:18
Installation of 2.2.15 fails at compiling clamav xrat Installation/Configuration 0 24th July 2007 22:49
Compiling Kernel from ssh session. joelee Kernel Questions 1 16th January 2007 21:07
Virtual Users And Domains With Postfix, Courier And MySQL User Spam Config acoghlan HOWTO-Related Questions 9 11th January 2007 23:20
ISPConfig + Turck MMCache + Hardened-PHP - Any Issues? BobbyQ General 8 3rd May 2006 22:52


All times are GMT +2. The time now is 15:51.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.