#1  
Old 4th February 2008, 12:20
nasir nasir is offline
Junior Member
 
Join Date: Mar 2006
Posts: 21
Thanks: 0
Thanked 0 Times in 0 Posts
Default Vsftpd Service is Offline

hi all expert i am installing ispconfig on centOS5.1 all installation is going well and all server is Online but vsftpd is Offline .
when i start the service /etc/init.d/vsftpd Start : service is running properly but ispconfig server status shows that vsftpd is Offline .
i try my best to check what the problem is but useless can anybody tell me whats the problem.
i am not using proftp in ISPconfig i am using Vsftpd.
when i open ftp://machineip then its running well but in ispconifg server status its shows Offline
waiting 4 ur kind responce
Thanx
Nasir
Reply With Quote
Sponsored Links
  #2  
Old 5th February 2008, 11:21
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 34,586
Thanks: 792
Thanked 4,983 Times in 3,903 Posts
Default

Please post the output of:

netstat -tap | grep ftp
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
  #3  
Old 6th February 2008, 13:11
nasir nasir is offline
Junior Member
 
Join Date: Mar 2006
Posts: 21
Thanks: 0
Thanked 0 Times in 0 Posts
Default

netstat -tap | grep ftp
tcp 0 0 *:ftp *:* LISTEN 10182/vsftpd
tcp 1 0 pacn.com:34107 ftp-osl.osuosl.org:http CLOSE_WAIT 2919/python
Reply With Quote
  #4  
Old 7th February 2008, 11:25
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 34,586
Thanks: 792
Thanked 4,983 Times in 3,903 Posts
Default

Ok, thats fine.

Please make sure that you have a definition for localhost pointing to IP 127.0.0.1 like:

127.0.0.1 localhost.localdomain localhost

in your /etc/hosts file
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
  #5  
Old 7th February 2008, 12:19
nasir nasir is offline
Junior Member
 
Join Date: Mar 2006
Posts: 21
Thanks: 0
Thanked 0 Times in 0 Posts
Default

127.0.0.1 localhost.localdomain localhost
192.168.1.44 pacepakistan.com pacepakistan
::1 localhost6.localdomain6 localhost6
Reply With Quote
  #6  
Old 7th February 2008, 17:13
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 41,711
Thanks: 1,899
Thanked 2,702 Times in 2,545 Posts
Default

What's in /etc/vsftpd.conf?
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #7  
Old 8th February 2008, 05:23
nasir nasir is offline
Junior Member
 
Join Date: Mar 2006
Posts: 21
Thanks: 0
Thanked 0 Times in 0 Posts
Default

here is the output of vsftd.conf
vi/ /etc/vsftpd/vsftpd.conf
"/etc/vsftpd/vsftpd.conf"
"/etc/vsftpd/vsftpd.conf" 116L, 4397C# Example config file /etc/vsftpd/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
anonymous_enable=YES
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will

# obviously need to create a directory writable by the FTP user.

#anon_upload_enable=YES

#
# Uncomment this if you want the anonymous FTP user to be able to create

# new directories.

#anon_mkdir_write_enable=YES

#
# Activate directory messages - messages given to remote users when they

# go into a certain directory.

dirmessage_enable=YES

#
# Activate logging of uploads/downloads.

xferlog_enable=YES

#
# Make sure PORT transfer connections originate from port 20 (ftp-data).

connect_from_port_20=YES

#
# If you want, you can arrange for uploaded anonymous files to be owned by

# a different user. Note! Using "root" for uploaded files is not

# recommended!

#chown_uploads=YES

#chown_username=whoever

#
# You may override where the log file goes if you like. The default is shown

# below.

#xferlog_file=/var/log/vsftpd.log

#
# If you want, you can have your log file in standard ftpd xferlog format

xferlog_std_format=YES

#
# You may change the default value for timing out an idle session.

#idle_session_timeout=600

#
# You may change the default value for timing out a data connection.

#data_connection_timeout=120

#
# It is recommended that you define on your system a unique user which the

# ftp server can use as a totally isolated and unprivileged user.

#nopriv_user=ftpsecure

#
# Enable this and the server will recognise asynchronous ABOR requests. Not

# recommended for security (the code is non-trivial). Not enabling it,

# however, may confuse older FTP clients.

#async_abor_enable=YES

#
# By default the server will pretend to allow ASCII mode but in fact ignore

# the request. Turn on the below options to have the server actually do ASCII

# mangling on files when in ASCII mode.

# Beware that on some FTP servers, ASCII support allows a denial of service

# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd

# predicted this attack and has always been safe, reporting the size of the

# raw file.

# ASCII mangling is a horrible feature of the protocol.

#ascii_upload_enable=YES

#ascii_download_enable=YES

#
# You may fully customise the login banner string:

#ftpd_banner=Welcome to blah FTP service.

#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently

# useful for combatting certain DoS attacks.

#deny_email_enable=YES

# (default follows)

#banned_email_file=/etc/vsftpd/banned_emails

#
# You may specify an explicit list of local users to chroot() to their home

# directory. If chroot_local_user is YES, then this list becomes a list of

# users to NOT chroot().

#chroot_list_enable=YES

# (default follows)

#chroot_list_file=/etc/vsftpd/chroot_list

#
# You may activate the "-R" option to the builtin ls. This is disabled by

# default to avoid remote users being able to cause excessive I/O on large

# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume

# the presence of the "-R" option, so there is a strong case for enabling it.

#ls_recurse_enable=YES

#
# When "listen" directive is enabled, vsftpd runs in standalone mode and

# listens on IPv4 sockets. This directive cannot be used in conjunction

# with the listen_ipv6 directive.

listen=YES

#
# This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6

# sockets, you must run two copies of vsftpd whith two configuration files.

# Make sure, that one of the listen options is commented !!

#listen_ipv6=YES


pam_service_name=vsftpd

userlist_enable=YES

tcp_wrappers=YES
Reply With Quote
  #8  
Old 8th February 2008, 17:15
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 41,711
Thanks: 1,899
Thanked 2,702 Times in 2,545 Posts
Default

Can you set tcp_wrappers to No and restart vsftpd?
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #9  
Old 9th February 2008, 19:32
nasir nasir is offline
Junior Member
 
Join Date: Mar 2006
Posts: 21
Thanks: 0
Thanked 0 Times in 0 Posts
 
Default

yes i done tcp wrapper =NO
now its working fine
Thanks dear
i realy very thankfulll 2 u
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
dns server error Hellbound General 7 2nd August 2007 09:18
Email not going out! cybereatl Installation/Configuration 12 28th February 2007 14:02
This is %#@*&^$# embarrassing! domino Smalltalk 34 5th February 2007 21:57
vsftpd showing Offline skdb Installation/Configuration 46 12th July 2006 13:39
UebiMiau login puntjuh Installation/Configuration 13 14th March 2006 18:24


All times are GMT +2. The time now is 02:43.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.