Go Back   HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials > ISPConfig 2 > Installation/Configuration

Do you like HowtoForge? Please consider supporting us by becoming a subscriber.
Reply
 
Thread Tools Display Modes
  #1  
Old 4th December 2007, 03:36
twmsdude twmsdude is offline
Junior Member
 
Join Date: Dec 2007
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Default cannot access ispconfig through usual port 81

Hi. I am having some issues with ispconfig. I installed it yesturday on a FRESH install of ubuntu 7.10 server edition. I followed the perfect server setup provided here for ispconfig and ubuntu 7.10. Everything installed fine. I am behind a router with all the required ports forwarded. I have two sites setup. I had them both working for about an hour until something happened with the virtual hosts in which whenever I go to one of the websites it takes me to the ispconfig login. When I go to the normal ispconfig login, which is http://www.(domainhere).com:81 it gives me a unable to connect error. I used to be getting a "192.168.1.103:80 has no virtualhosts" error. I somehow fixed the error by renaming the vhosts file to vhosts_old.conf and having the one with the ~ on the end to just the vhosts file. I have never seen the vhosts file that is time and date dated on my server. All my ips are set to my internal ip which is 192.168.1.103. I don't understand how there can be no virtual hosts when i see like 3!

Here's my vhosts file:
Code:
###################################
#
# ISPConfig vHost Configuration File
#         Version 1.0
#
###################################
#
NameVirtualHost 192.168.1.103:80
<VirtualHost 192.168.1.103:80>
  ServerName localhost
  ServerAdmin root@localhost
  DocumentRoot /var/www/sharedip
</VirtualHost>
#
#
######################################
# Vhost: www.alessandrasouers.com:80
######################################
#
#
<VirtualHost 192.168.1.103:80>
ServerName www.alessandrasouers.com:80
ServerAdmin webmaster@alessandrasouers.com
DocumentRoot /var/www/web10/web
ServerAlias www.alessandrasouers.com
DirectoryIndex index.html index.htm index.php index.php5 index.php4 index.php3 index.shtml index.cgi index.pl index.jsp Default.htm default.htm
ErrorLog /var/www/web10/log/error.log
Alias /error/ "/var/www/web10/web/error/"
ErrorDocument 400 /error/invalidSyntax.html
ErrorDocument 401 /error/authorizationRequired.html
ErrorDocument 403 /error/forbidden.html
ErrorDocument 404 /error/fileNotFound.html
ErrorDocument 405 /error/methodNotAllowed.html
ErrorDocument 500 /error/internalServerError.html
ErrorDocument 503 /error/overloaded.html
AliasMatch ^/~([^/]+)(/(.*))? /var/www/web10/user/$1/web/$3
AliasMatch ^/users/([^/]+)(/(.*))? /var/www/web10/user/$1/web/$3
</VirtualHost>
#
#
#
######################################
# Vhost: www.fbscomputer.com:80
######################################
#
#
<VirtualHost 192.168.1.103:80>
ServerName www.fbscomputer.com:80
ServerAdmin webmaster@fbscomputer.com
DocumentRoot /var/www/web2/web
ServerAlias www.fbscomputer.com
DirectoryIndex index.html index.htm index.php index.php5 index.php4 index.php3 index.shtml index.cgi index.pl index.jsp Default.htm default.htm
ScriptAlias  /cgi-bin/ /var/www/web2/cgi-bin/
AddHandler cgi-script .cgi
AddHandler cgi-script .pl
ErrorLog /var/www/web2/log/error.log
AddType application/x-httpd-php .php .php3 .php4 .php5
<Files *.php>
    SetOutputFilter PHP
    SetInputFilter PHP
</Files>
<Files *.php3>
    SetOutputFilter PHP
    SetInputFilter PHP
</Files>
<Files *.php4>
    SetOutputFilter PHP
    SetInputFilter PHP
</Files>
<Files *.php5>
    SetOutputFilter PHP
    SetInputFilter PHP
</Files>
php_admin_flag safe_mode Off
AddType text/html .shtml
AddOutputFilter INCLUDES .shtml
Alias /error/ "/var/www/web2/web/error/"
ErrorDocument 400 /error/invalidSyntax.html
ErrorDocument 401 /error/authorizationRequired.html
ErrorDocument 403 /error/forbidden.html
ErrorDocument 404 /error/fileNotFound.html
ErrorDocument 405 /error/methodNotAllowed.html
ErrorDocument 500 /error/internalServerError.html
ErrorDocument 503 /error/overloaded.html
AliasMatch ^/~([^/]+)(/(.*))? /var/www/web2/user/$1/web/$3
AliasMatch ^/users/([^/]+)(/(.*))? /var/www/web2/user/$1/web/$3
</VirtualHost>
#
#
#
Reply With Quote
Sponsored Links
  #2  
Old 4th December 2007, 03:38
twmsdude twmsdude is offline
Junior Member
 
Join Date: Dec 2007
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Default more

Here's the meat of my apache2.conf:
Code:
ServerRoot "/etc/apache2"

#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
#<IfModule !mpm_winnt.c>
#<IfModule !mpm_netware.c>
LockFile /var/lock/apache2/accept.lock
#</IfModule>
#</IfModule>

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
PidFile /var/run/apache2.pid

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15

##
## Server-Pool Size Regulation (MPM specific)
## 

# prefork MPM
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes which are kept spare
# MaxSpareServers: maximum number of server processes which are kept spare
# MaxClients: maximum number of server processes allowed to start
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_prefork_module>
    StartServers          5
    MinSpareServers       5
    MaxSpareServers      10
    MaxClients          150
    MaxRequestsPerChild   0
</IfModule>

# worker MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_worker_module>
    StartServers          2
    MaxClients          150
    MinSpareThreads      25
    MaxSpareThreads      75 
    ThreadsPerChild      25
    MaxRequestsPerChild   0
</IfModule>

User www-data
Group www-data

#
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives.  See also the AllowOverride
# directive.
#

AccessFileName .htaccess

#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<Files ~ "^\.ht">
    Order allow,deny
    Deny from all
</Files>

#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain


#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off

# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog /var/log/apache2/error.log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

# Include module configuration:
Include /etc/apache2/mods-enabled/*.load
Include /etc/apache2/mods-enabled/*.conf

# Include all the user configurations:
Include /etc/apache2/httpd.conf

# Include ports listing
Include /etc/apache2/ports.conf

#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

#
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of:  Full | OS | Minor | Minimal | Major | Prod
# where Full conveys the most information, and Prod the least.
#
ServerTokens Full

#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory 
# listings, mod_status and mod_info output etc., but not CGI generated 
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of:  On | Off | EMail
#
ServerSignature On



#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# Putting this all together, we can internationalize error responses.
#
# We use Alias to redirect any /error/HTTP_<error>.html.var response to
# our collection of by-error message multi-language collections.  We use 
# includes to substitute the appropriate text.
#
# You can modify the messages' appearance without changing any of the
# default HTTP_<error>.html.var files by adding the line:
#
#   Alias /error/include/ "/your/include/path/"
#
# which allows you to create your own set of files by starting with the
# /usr/share/apache2/error/include/ files and copying them to /your/include/path/, 
# even on a per-VirtualHost basis.  The default include files will display
# your Apache version number and your ServerAdmin email address regardless
# of the setting of ServerSignature.
#
# The internationalized error documents require mod_alias, mod_include
# and mod_negotiation.  To activate them, uncomment the following 30 lines.

#    Alias /error/ "/usr/share/apache2/error/"
#
#    <Directory "/usr/share/apache2/error">
#        AllowOverride None
#        Options IncludesNoExec
#        AddOutputFilter Includes html
#        AddHandler type-map var
#        Order allow,deny
#        Allow from all
#        LanguagePriority en cs de es fr it nl sv pt-br ro
#        ForceLanguagePriority Prefer Fallback
#    </Directory>
#
#    ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
#    ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
#    ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
#    ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
#    ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
#    ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
#    ErrorDocument 410 /error/HTTP_GONE.html.var
#    ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
#    ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
#    ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
#    ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
#    ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
#    ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
#    ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
#    ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
#    ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
#    ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var



# Include of directories ignores editors' and dpkg's backup files,
# see README.Debian for details.

# Include generic snippets of statements
Include /etc/apache2/conf.d/

# Include the virtual host configurations:
Include /etc/apache2/sites-enabled/

<Directory /var/www/sharedip>
    Options +Includes -Indexes
    AllowOverride None
    AllowOverride Indexes AuthConfig Limit FileInfo
    Order allow,deny
    Allow from all
    <Files ~ "^\.ht">
    Deny from all
    </Files>
</Directory>

###############ispconfig_log###############
LogFormat "%v||||%b||||%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined_ispconfig
CustomLog "|/root/ispconfig/cronolog --symlink=/var/log/httpd/ispconfig_access_log /var/log/httpd/ispconfig_access_log_%Y_%m_%d" combined_ispconfig

<Directory /var/www/*/web>
    Options +Includes -Indexes
    AllowOverride None
    AllowOverride Indexes AuthConfig Limit FileInfo
    Order allow,deny
    Allow from all
    <Files ~ "^\.ht">
    Deny from all
    </Files>
</Directory>

<Directory /var/www/*/user/*/web>
    Options +Includes -Indexes
    AllowOverride None
    AllowOverride Indexes AuthConfig Limit FileInfo
    Order allow,deny
    Allow from all
    <Files ~ "^\.ht">
    Deny from all
    </Files>
</Directory>

<Directory /var/www/*/cgi-bin>
    Options ExecCGI -Indexes
    AllowOverride None
    AllowOverride Indexes AuthConfig Limit FileInfo
    Order allow,deny
    Allow from all
    <Files ~ "^\.ht">
    Deny from all
    </Files>
</Directory>

Include /etc/apache2/vhosts/Vhosts_ispconfig.conf
Reply With Quote
  #3  
Old 4th December 2007, 09:00
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 36,495
Thanks: 835
Thanked 5,534 Times in 4,352 Posts
Default

The ISPConfig login has nothing to do with the apache webserver that runs your websites. I guess that you changed the port of the ISPConfig webserver. Please have a look at the file /root/ispconfig/httpd/conf/httpd.conf and set the port to 81 again. Then restart ISPConfig and your apache webserver.
__________________
Till Brehm
--
Get ISPConfig support and the ISPConfig 3 manual from ispconfig.org.
Reply With Quote
  #4  
Old 5th December 2007, 01:37
twmsdude twmsdude is offline
Junior Member
 
Join Date: Dec 2007
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
 
Default idiot mistake

Hi. If found the issue. On my linksys router, which runs dd-wrt, I port forwarded from 80to81 in one listing of it. I saw that and forwarded them seperatly and it fixed my problem. i was doing the same thing to 21to22 where i couldn't access ftp externally. the issue is now solved.

Leason learned: forward your ports correctly.

sorry for the waste of time/server space/window space.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Access to ISPCONFIG configuration page chrisrob301 Installation/Configuration 3 11th September 2007 19:26
ERROR: The PHP binary coming with ISPConfig does not work properly on your system W1SKCC Installation/Configuration 2 2nd February 2007 14:55
4 questions about ispconfig and domains, please help! dimas Installation/Configuration 7 1st August 2006 12:55
SP-Server Setup - Ubuntu 5.10 "Breezy Badger" - Page 6 (changes) LuisC-SM HOWTO-Related Questions 0 21st April 2006 16:16
Access Denied on Port: 81 nandhu Installation/Configuration 2 10th August 2005 15:05


All times are GMT +2. The time now is 22:51.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.