#1  
Old 20th September 2007, 00:07
joelee joelee is offline
Member
 
Join Date: Sep 2006
Posts: 47
Thanks: 0
Thanked 0 Times in 0 Posts
Default Error Installing Zimbra

Hi, I am trying my first install of Zimbra. I running on a OpenVZ install and the guess is Ubuntu6. This openvz machine has 100G assigned to it. During the install of Zimbra after selecting the Zimbra Servers to install I get this error:
Code:
Checking required space for zimbra-core
checking space for zimbra-store
/opt/zimbra requires at least 5GB of space to install.
0GB is not enough space to install.

Installation cancelled.
I know I have enough disk space. I think the problem is that Zimbra is trying to install on the /opt partition... However, this partition I think is part of my /root partition which is only 1G. So, I think there's not enough disk space there. Is there a way for me to get Zimbra to install via my /var partition which contains much of my disk space? Would appreciate any comments/suggestions.

Below is the output of df -h
Code:
root@mx1:/usr/src/zcs# df -h
Filesystem            Size  Used Avail Use% Mounted on
simfs                 1.0G  833M  192M  82% /
tmpfs                 496M   16K  496M   1% /var/run
tmpfs                 496M     0  496M   0% /var/lock
tmpfs                 496M     0  496M   0% /dev/shm
tmpfs                 496M   16K  496M   1% /var/run
tmpfs                 496M     0  496M   0% /var/lock
-Joe
Reply With Quote
Sponsored Links
  #2  
Old 20th September 2007, 17:12
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,741 Times in 2,575 Posts
Default

All your partitions are too small. If there's free space on your hard drive, you can try GParted to resize the partitions.
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #3  
Old 6th October 2007, 22:14
joelee joelee is offline
Member
 
Join Date: Sep 2006
Posts: 47
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Hi Falko, I've resolve the space issue reported before. This was an OpenVZ resource issue. However, I proceed with the install and all seems to go well until I get this error below:
Code:
Setting defaults from saved config in /opt/zimbra/.saveconfig/config.save
     HOSTNAME=dsl027-139-174.dc1.dsl.speakeasy.net
     LDAPHOST=
     LDAPPORT=
     SNMPTRAPHOST=
     SMTPSOURCE=
     SMTPDEST=
     SNMPNOTIFY=0
     SMTPNOTIFY=0
     LDAPROOTPW=zimbra
     LDAPZIMBRAPW=zimbra
  Restoring existing configuration file from /opt/zimbra/.saveconfig/config.save...done
  chown: cannot access `/opt/zimbra/tomcat/conf/keystore': No such file or directory
  chown: cannot access `/opt/zimbra/conf/smtpd.key': No such file or directory
  chown: cannot access `/opt/zimbra/conf/smtpd.crt': No such file or directory
  chown: cannot access `/opt/zimbra/conf/slapd.crt': No such file or directory
  chown: cannot access `/opt/zimbra/conf/perdition.pem': No such file or directory
  chown: cannot access `/opt/zimbra/conf/perdition.key': No such file or directory
  Operations logged to /tmp/zmsetup.log.18172
  ERROR: service.FAILURE (system failure: getDirectContext) (cause: javax.naming.CommunicationException localhost:389)
  ERROR: service.FAILURE (system failure: getDirectContext) (cause: javax.naming.CommunicationException localhost:389)
  Setting defaults...Done
  Setting defaults from existing config...Warning: null valued key 'mysql_logger_root_password'
  Upgrading from  to 4.5.7_GA_1319
  Stopping zimbra services
  Stop failed - exiting
  UPGRADE FAILED - exiting
Per above error, I was suprise to see my hostname showing as:
HOSTNAME=dsl027-139-174.dc1.dsl.speakeasy.net

I am not sure why that is since I've set my hostname properly in /etc/hostname as: mx1.domain.com... Also, I've set my /etc/hosts exactly how the how-to suggest to add this line to /etc/hosts:
127.0.0.1 localhost.localdomain localhost

Regarding the service failures above, I am not sure why I am
getting them. Any thoughts?

Thanks in advance for any comments/suggestions!

Joe



Reply With Quote
  #4  
Old 7th October 2007, 20:24
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,741 Times in 2,575 Posts
Default

Quote:
Originally Posted by joelee
Per above error, I was suprise to see my hostname showing as:
[B]HOSTNAME=dsl027-139-174.dc1.dsl.speakeasy.net
I guess that's the PTR record for your server's IP address. You can check with
Code:
dig -x your.ip.add.ress
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #5  
Old 7th October 2007, 20:51
joelee joelee is offline
Member
 
Join Date: Sep 2006
Posts: 47
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Falko, yes it is the pointer to my IP address BUT it should not show that info from zimbra. I expect for zimbra to pick up my hostname as mx1.domain.com as I have defined in /etc/hosts. When I run command:
hostname
hostname -f
They both output my host name as mx1.domain.com...

But, as shown in my previuos post zimbra is showing the PTR record?
This is what I hope to fix.

Joe
Reply With Quote
  #6  
Old 8th October 2007, 17:35
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,741 Times in 2,575 Posts
Default

Does mx1.domain.com point to your.ip.add.ress? If it doesn't exist in DNS, create it now.
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #7  
Old 11th October 2007, 16:44
joelee joelee is offline
Member
 
Join Date: Sep 2006
Posts: 47
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Hi, I got my dns issues resolved and have been able to install Zimbra. The problem I'm having now is that I can't seem to send or receive emails. I sent email from my gmail account to my user account created in zimbra mail server. Also, I am able to login to my zimbra email account via the client browser. When I create an email going to my gmail account no email gets received either.

I've checked the Zimbra Admin mail queue and I do see the emails being deferred. So, I imagine the emails are making it to the server ruling out fw or connectivity issues - I think. Any thoughts?

Joe
Reply With Quote
  #8  
Old 12th October 2007, 16:19
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,741 Times in 2,575 Posts
 
Default

Please make sure that your server isn't blacklisted: http://www.mxtoolbox.com/blacklists.aspx

and that the MX record for your email domain is pointing to your server.
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Zimbra and ISPconfig geeksbydesign Suggest HOWTO 5 9th September 2007 19:04
Zimbra on Ubuntu, please help me with 2 problem owl700 HOWTO-Related Questions 3 12th August 2007 13:56
ISPCONFIG with Zimbra, or Scalix? geeksbydesign General 9 12th April 2007 20:38
Problems installing Zimbra on Debian 3.1 sender HOWTO-Related Questions 11 28th March 2007 23:00
ZIMBRA compatible with ISPcfg? Ovidiu General 1 11th October 2006 18:59


All times are GMT +2. The time now is 20:25.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.