Go Back   HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials > Linux Forums > Server Operation

Do you like HowtoForge? Please consider supporting us by becoming a subscriber.
Reply
 
Thread Tools Display Modes
  #1  
Old 15th May 2007, 07:40
cruz cruz is offline
Senior Member
 
Join Date: Apr 2007
Posts: 365
Thanks: 51
Thanked 2 Times in 2 Posts
Default maillog entry

I was looking at my maillog file and found this.[HTML][May 14 21:30:01 server1 postfix/smtpd[17758]: lost connection after CONNECT from localhost.localdomain[127.0.0.1]
May 14 21:30:01 server1 postfix/smtpd[17758]: disconnect from localhost.localdom ain[127.0.0.1]
May 14 21:30:01 server1 dovecot: pop3-login: Disconnected: rip=::ffff:127.0.0.1, lip=::ffff:127.0.0.1, secured
May 14 21:55:44 server1 postfix/qmgr[16487]: EC15541E253: from=<>, size=2872, nrcpt=1 (queue active)May 14 21:56:14 server1 postfix/smtp[18113]: connect to example.com[192.0.34.166]: Connection timed out (port 25)
May 14 21:56:14 server1 postfix/smtp[18113]: EC15541E253: to=<web1_admin@example.com>, relay=none, delay=211721, delays=211691/0.02/30/0, dsn=4.4.1, status=deferred (connect to example.com[192.0.34.166]: Connection timed out)
May 14 22:00:01 server1 postfix/smtpd[18177]: connect from localhost.localdomain [127.0.0.1]
May 14 22:00:01 server1 postfix/smtpd[18177]: lost connection after CONNECT from localhost.localdomain127.0.0.1]May 14 22:00:01 server1 postfix/smtpd[18177]: disconnect from localhost.localdomain[127.0.0.1]/HTML]There is no (from) and I have not used the mail. Is this normal ? I traced the ip to LA. To a place called example dot com. Are they trying to send me mail? and why is it timming out on port 25? because my server is blocking the mail? The router is open to that port. I do have a web1_admin e-mail account setup in the domain I have been trying to get going. But it is not @example.com. It is the domain I set up, but that is not showing. I can not figure out what is ok and what is not in this mail log. I guess it takes time to learn how to read them.
Reply With Quote
Sponsored Links
  #2  
Old 16th May 2007, 15:31
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,744 Times in 2,577 Posts
Default

Do you use example.com somewhere else on your system? What's the output of
Code:
hostname -f
? What's in /etc/hosts?
Your system is trying to send to example.com, but I think there's no mail server on example.com, that's why you have these connection problems.
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #3  
Old 16th May 2007, 21:29
cruz cruz is offline
Senior Member
 
Join Date: Apr 2007
Posts: 365
Thanks: 51
Thanked 2 Times in 2 Posts
Default Results

Hostname -f is ok. It is my server1.myserver.com. the hosts are ok as well. It is just as I entered on setup.

Last edited by cruz; 16th May 2007 at 21:32.
Reply With Quote
  #4  
Old 17th May 2007, 16:16
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,744 Times in 2,577 Posts
Default

Quote:
Originally Posted by cruz
Hostname -f is ok. It is my server1.myserver.com. the hosts are ok as well. It is just as I entered on setup.
And myserver.com != example.com?
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #5  
Old 19th May 2007, 19:12
cruz cruz is offline
Senior Member
 
Join Date: Apr 2007
Posts: 365
Thanks: 51
Thanked 2 Times in 2 Posts
Default mail message-host not found

example.com is not in any place you told me to look. I checked the log today and it is still trying to send mail to web1_admin@example.com. This is after I went into the site I had set up and deleted the email account. I was thinking it was the email account that was sending out. It is the only email account I have setup under ispconfig. Now I have no emails setup and am still getting the (host not found) in the mail log. Any clue where this is coming from? thanks for all the info.

entered latter
I just restarted the server and when It was shutting down it gave error (shutting down postfix failed). then when I restarted the server it told me (setting default address for postfix to 127.0.0.1. Do I need to start a new thread for this or is it part of this mail issue I am dealing with?

Last edited by cruz; 19th May 2007 at 19:39.
Reply With Quote
  #6  
Old 20th May 2007, 17:11
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,744 Times in 2,577 Posts
Default

What's in /etc/postfix/main.cf (please strip out the comments, and please do not replace your real domain names with fake domain names)?
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #7  
Old 28th May 2007, 07:14
cruz cruz is offline
Senior Member
 
Join Date: Apr 2007
Posts: 365
Thanks: 51
Thanked 2 Times in 2 Posts
Default main.cf

These are the only lines that are not commented out.
HTML Code:
queue_directory = /var/spool/postfix

command_directory = /usr/sbin

daemon_directory = /usr/libexec/postfix

mail_owner = postfix

inet_interfaces = all

unknown_local_recipient_reject_code = 550

alias_database = hash:/etc/aliases

debug_peer_level = 2

debugger_command =
         PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
         xxgdb $daemon_directory/$process_name $process_id & sleep 5

sendmail_path = /usr/sbin/sendmail.postfix

newaliases_path = /usr/bin/newaliases.postfix

mailq_path = /usr/bin/mailq.postfix

setgid_group = postdrop

html_directory = no

manpage_directory = /usr/share/man

sample_directory = /usr/share/doc/postfix-2.3.3/samples

readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES
smtpd_sasl_local_domain =
smtpd_sasl_auth_enable = yes
smtpd_sasl_security_options = noanonymous
broken_sasl_auth_clients = yes
smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination
mynetworks = 127.0.0.0/8
smtpd_tls_auth_only = no
smtp_use_tls = yes
smtpd_use_tls = yes
smtp_tls_note_starttls_offer = yes
smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key
smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt
smtpd_tls_CAfile = /etc/postfix/ssl/cacert.pem
smtpd_tls_loglevel = 1
smtpd_tls_received_header = yes
smtpd_tls_session_cache_timeout = 3600s
tls_random_source = dev:/dev/urandom

virtual_maps = hash:/etc/postfix/virtusertable

mydestination = /etc/postfix/local-host-names
I hope I did this corect. I had to copy small amounts from putty and past them in a text editer. It would not copy all of it at one time.
Reply With Quote
  #8  
Old 29th May 2007, 13:32
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,744 Times in 2,577 Posts
Default

Looks ok. What's the output of
Code:
postconf -d
?
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #9  
Old 30th May 2007, 06:18
cruz cruz is offline
Senior Member
 
Join Date: Apr 2007
Posts: 365
Thanks: 51
Thanked 2 Times in 2 Posts
Default postconfig output

HTML Code:
relayhost =
relocated_maps =
remote_header_rewrite_domain =
require_home_directory = no
resolve_dequoted_address = yes
resolve_null_domain = no
resolve_numeric_domain = no
rewrite_service_name = rewrite
sample_directory = /etc/postfix
sender_bcc_maps =
sender_canonical_classes = envelope_sender, header_sender
sender_canonical_maps =
sender_dependent_relayhost_maps =
sendmail_path = /usr/sbin/sendmail
service_throttle_time = 60s
setgid_group = postdrop
show_user_unknown_table_name = yes
showq_service_name = showq
smtp_always_send_ehlo = yes
smtp_bind_address =
smtp_bind_address6 =
smtp_cname_overrides_servername = no
smtp_connect_timeout = 30s
smtp_connection_cache_destinations =
smtp_connection_cache_on_demand = yes
smtp_connection_cache_time_limit = 2s
smtp_connection_reuse_time_limit = 300s
smtp_data_done_timeout = 600s
smtp_data_init_timeout = 120s
smtp_data_xfer_timeout = 180s
smtp_defer_if_no_mx_address_found = no
smtp_destination_concurrency_limit = $default_destination_concurrency_limit
smtp_destination_recipient_limit = $default_destination_recipient_limit
smtp_discard_ehlo_keyword_address_maps =
smtp_discard_ehlo_keywords =
smtp_enforce_tls = no
smtp_fallback_relay = $fallback_relay
smtp_generic_maps =
smtp_helo_name = $myhostname
smtp_helo_timeout = 300s
smtp_host_lookup = dns
smtp_line_length_limit = 990
smtp_mail_timeout = 300s
smtp_mx_address_limit = 5
smtp_mx_session_limit = 2
smtp_never_send_ehlo = no
smtp_pix_workaround_delay_time = 10s
smtp_pix_workaround_threshold_time = 500s
smtp_quit_timeout = 300s
smtp_quote_rfc821_envelope = yes
smtp_randomize_addresses = yes
smtp_rcpt_timeout = 300s
smtp_rset_timeout = 20s
smtp_sasl_auth_enable = no
smtp_sasl_mechanism_filter =
smtp_sasl_password_maps =
smtp_sasl_path =
smtp_sasl_security_options = noplaintext, noanonymous
smtp_sasl_tls_security_options = $smtp_sasl_security_options
smtp_sasl_tls_verified_security_options = $smtp_sasl_tls_security_options
smtp_sasl_type = cyrus
smtp_send_xforward_command = no
smtp_sender_dependent_authentication = no
smtp_skip_5xx_greeting = yes
smtp_skip_quit_response = yes
smtp_starttls_timeout = 300s
smtp_tls_CAfile =
smtp_tls_CApath =
smtp_tls_cert_file =
smtp_tls_dcert_file =
smtp_tls_dkey_file = $smtp_tls_dcert_file
smtp_tls_enforce_peername = yes
smtp_tls_exclude_ciphers =
smtp_tls_key_file = $smtp_tls_cert_file
smtp_tls_loglevel = 0
smtp_tls_mandatory_ciphers = medium
smtp_tls_mandatory_exclude_ciphers =
smtp_tls_mandatory_protocols = SSLv3, TLSv1
smtp_tls_note_starttls_offer = no
smtp_tls_per_site =
smtp_tls_policy_maps =
smtp_tls_scert_verifydepth = 5
smtp_tls_secure_cert_match = nexthop, dot-nexthop
smtp_tls_security_level =
smtp_tls_session_cache_database =
smtp_tls_session_cache_timeout = 3600s
smtp_tls_verify_cert_match = hostname
smtp_use_tls = no
smtp_xforward_timeout = 300s
smtpd_authorized_verp_clients = $authorized_verp_clients
smtpd_authorized_xclient_hosts =
smtpd_authorized_xforward_hosts =
smtpd_banner = $myhostname ESMTP $mail_name
smtpd_client_connection_count_limit = 50
smtpd_client_connection_rate_limit = 0
smtpd_client_event_limit_exceptions = ${smtpd_client_connection_limit_exceptions                                                             :$mynetworks}
smtpd_client_message_rate_limit = 0
smtpd_client_new_tls_session_rate_limit = 0
smtpd_client_recipient_rate_limit = 0
smtpd_client_restrictions =
smtpd_data_restrictions =
smtpd_delay_open_until_valid_rcpt = yes
smtpd_delay_reject = yes
smtpd_discard_ehlo_keyword_address_maps =
smtpd_discard_ehlo_keywords =
smtpd_end_of_data_restrictions =
smtpd_enforce_tls = no
smtpd_error_sleep_time = 1s
smtpd_etrn_restrictions =
smtpd_expansion_filter = \t\40!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQR                                                             STUVWXYZ[\\]^_`abcdefghijklmnopqrstuvwxyz{|}~
smtpd_forbidden_commands = CONNECT GET POST
smtpd_hard_error_limit = 20
smtpd_helo_required = no
smtpd_helo_restrictions =
smtpd_history_flush_threshold = 100
smtpd_junk_command_limit = 100
smtpd_milters =
smtpd_noop_commands =
smtpd_null_access_lookup_key = <>
smtpd_peername_lookup = yes
smtpd_policy_service_max_idle = 300s
smtpd_policy_service_max_ttl = 1000s
smtpd_policy_service_timeout = 100s
smtpd_proxy_ehlo = $myhostname
smtpd_proxy_filter =
smtpd_proxy_timeout = 100s
smtpd_recipient_limit = 1000
smtpd_recipient_overshoot_limit = 1000
smtpd_recipient_restrictions = permit_mynetworks, reject_unauth_destination
smtpd_reject_unlisted_recipient = yes
smtpd_reject_unlisted_sender = no
smtpd_restriction_classes =
smtpd_sasl_auth_enable = no
smtpd_sasl_authenticated_header = no
smtpd_sasl_exceptions_networks =
smtpd_sasl_local_domain =
smtpd_sasl_path = smtpd
smtpd_sasl_security_options = noanonymous
smtpd_sasl_tls_security_options = $smtpd_sasl_security_options
smtpd_sasl_type = cyrus
smtpd_sender_login_maps =
smtpd_sender_restrictions =
smtpd_soft_error_limit = 10
smtpd_starttls_timeout = 300s
smtpd_timeout = 300s
smtpd_tls_CAfile =
smtpd_tls_CApath =
smtpd_tls_always_issue_session_ids = yes
smtpd_tls_ask_ccert = no
smtpd_tls_auth_only = no
smtpd_tls_ccert_verifydepth = 5
smtpd_tls_cert_file =
smtpd_tls_dcert_file =
smtpd_tls_dh1024_param_file =
smtpd_tls_dh512_param_file =
smtpd_tls_dkey_file = $smtpd_tls_dcert_file
smtpd_tls_exclude_ciphers =
smtpd_tls_key_file = $smtpd_tls_cert_file
smtpd_tls_loglevel = 0
smtpd_tls_mandatory_ciphers = medium
smtpd_tls_mandatory_exclude_ciphers =
smtpd_tls_mandatory_protocols = SSLv3, TLSv1
smtpd_tls_received_header = no
smtpd_tls_req_ccert = no
smtpd_tls_security_level =
smtpd_tls_session_cache_database =
smtpd_tls_session_cache_timeout = 3600s
smtpd_tls_wrappermode = no
smtpd_use_tls = no
soft_bounce = no
stale_lock_time = 500s
strict_7bit_headers = no
strict_8bitmime = no
strict_8bitmime_body = no
strict_mime_encoding_domain = no
strict_rfc821_envelopes = no
sun_mailtool_compatibility = no
swap_bangpath = yes
syslog_facility = mail
syslog_name = postfix
tls_daemon_random_bytes = 32
tls_export_cipherlist = ALL:+RC4:@STRENGTH
tls_high_cipherlist = !EXPORT:!LOW:!MEDIUM:ALL:+RC4:@STRENGTH
tls_low_cipherlist = !EXPORT:ALL:+RC4:@STRENGTH
tls_medium_cipherlist = !EXPORT:!LOW:ALL:+RC4:@STRENGTH
tls_null_cipherlist = !aNULL:eNULL+kRSA
tls_random_bytes = 32
tls_random_exchange_name = ${config_directory}/prng_exch
tls_random_prng_update_period = 3600s
tls_random_reseed_period = 3600s
tls_random_source = dev:/dev/urandom
trace_service_name = trace
transport_maps =
transport_retry_time = 60s
trigger_timeout = 10s
undisclosed_recipients_header = To: undisclosed-recipients:;
unknown_address_reject_code = 450
unknown_client_reject_code = 450
unknown_hostname_reject_code = 450
unknown_local_recipient_reject_code = 550
unknown_relay_recipient_reject_code = 550
unknown_virtual_alias_reject_code = 550
unknown_virtual_mailbox_reject_code = 550
unverified_recipient_reject_code = 450
unverified_sender_reject_code = 450
verp_delimiter_filter = -=+
virtual_alias_domains = $virtual_alias_maps
virtual_alias_expansion_limit = 1000
virtual_alias_maps = $virtual_maps
virtual_alias_recursion_limit = 1000
virtual_destination_concurrency_limit = $default_destination_concurrency_limit
virtual_destination_recipient_limit = $default_destination_recipient_limit
virtual_gid_maps =
virtual_mailbox_base =
virtual_mailbox_domains = $virtual_mailbox_maps
virtual_mailbox_limit = 51200000
virtual_mailbox_lock = fcntl
virtual_mailbox_maps =
virtual_minimum_uid = 100
virtual_transport = virtual
virtual_uid_maps =
Here you go. Where is this info from? Dose this have to do with postfix mail?
Reply With Quote
  #10  
Old 31st May 2007, 13:47
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,744 Times in 2,577 Posts
 
Default

You didn't post the beginning of the postconf output...

Quote:
Dose this have to do with postfix mail?
These are the default Postfix settings that are used unless they are overridden by settings in /etc/postfix/main.cf.
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
named.conf duplicate entry issue jopa123 Installation/Configuration 1 8th March 2007 08:27
How to permanently remove entry from /etc/postfix/local-host-names mxc General 5 16th November 2006 14:41
Manually removing a mysql entry out of the recycle bin brainz Installation/Configuration 2 26th June 2006 06:05
xen not booting qiu HOWTO-Related Questions 11 2nd May 2006 10:20
Maillog - Does it get Erased? kisong Installation/Configuration 2 20th October 2005 18:56


All times are GMT +2. The time now is 12:29.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.