#1  
Old 2nd November 2005, 03:07
dahljh dahljh is offline
Junior Member
 
Join Date: Oct 2005
Posts: 24
Thanks: 0
Thanked 0 Times in 0 Posts
Default DNS or something

Well, I don't even know where to start. I fear I messed up things royally.

Lets start with this:

Under Management > Server > Settings
The domain name can or can not be the same as a site I am planning to host?

Under Management > Server > DNS
All of the sites we are hosting are using multiple outside DNS servers. So what should we put here?
Reply With Quote
Sponsored Links
  #2  
Old 2nd November 2005, 08:56
dahljh dahljh is offline
Junior Member
 
Join Date: Oct 2005
Posts: 24
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Here is my main issue: Email to the new ISPConfig server goes somewhere, but not to users email boxes.

Here is a selection from my mail log.

Setup - I sent a message from Yahoo (FredFlintsone@yahoo.com) to one of my ISPConfig Hosting Clients (FredFlintstone@Bedrock.com).

Code:
Nov  2 02:30:26 WEBPRO postfix/smtpd[19862]: warning: connect to private/tlsmgr: No such file or directory
Nov  2 02:30:27 WEBPRO postfix/smtpd[19862]: warning: connect to private/tlsmgr: No such file or directory
Nov  2 02:30:27 WEBPRO postfix/smtpd[19862]: warning: problem talking to server private/tlsmgr: No such file or directory
Nov  2 02:30:27 WEBPRO postfix/smtpd[19862]: warning: no entropy for TLS key generation: disabling TLS support
Nov  2 02:30:27 WEBPRO postfix/smtpd[19862]: connect from web30501.mail.mud.yahoo.com[68.142.200.114]
Nov  2 02:30:28 WEBPRO postfix/smtpd[19862]: warning: support for restriction "check_relay_domains" will be removed from Postfix; use "reject_unauth_destination" instead
Nov  2 02:30:28 WEBPRO postfix/smtpd[19862]: 0C0EC2FEBE: client=web30501.mail.mud.yahoo.com[68.142.200.114]
Nov  2 02:30:28 WEBPRO postfix/cleanup[19866]: 0C0EC2FEBE: message-id=<20051102073026.48319.qmail@web30501.mail.mud.yahoo.com>
Nov  2 02:30:28 WEBPRO postfix/qmgr[15658]: 0C0EC2FEBE: from=<FredFlintstone@yahoo.com>, size=1221, nrcpt=1 (queue active)
Nov  2 02:30:28 WEBPRO postfix/smtpd[19862]: disconnect from web30501.mail.mud.yahoo.com[68.142.200.114]
Nov  2 02:30:28 WEBPRO postfix/pickup[15657]: 639982FEC6: uid=10035 from=<smt13_FredFlintstone>
Nov  2 02:30:28 WEBPRO postfix/cleanup[19866]: 639982FEC6: message-id=<20051102073028.639982FEC6@webpro.MyNewServer.com>
Nov  2 02:30:28 WEBPRO postfix/qmgr[15658]: 639982FEC6: from=<smt13_FredFlintstone@webpro.MyNewServer.com>, size=427, nrcpt=1 (queue active)
Nov  2 02:30:28 WEBPRO postfix/local[19890]: 639982FEC6: to=<admispconfig@localhost.MyNewServer.com>, orig_to=<admispconfig@localhost>, relay=local, delay=0, status=sent (delivered to command: /usr/bin/procmail -f-)
Nov  2 02:30:28 WEBPRO postfix/qmgr[15658]: 639982FEC6: removed
Nov  2 02:30:32 WEBPRO postfix/local[19867]: 0C0EC2FEBE: to=<smt13_FredFlintstone@webpro.MyNewServer.com>, orig_to=<FredFlintstone@Bedrock.com>, relay=local, delay=5, status=sent (delivered to command: /usr/bin/procmail -f-)
Nov  2 02:30:32 WEBPRO postfix/qmgr[15658]: 0C0EC2FEBE: removed
I have no idea where the email went, but it's not in the users mailbox.

I also don't know who "admispconfig@" is.

Here is my netstat.

Code:
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address           Foreign Address         State
tcp        0      0 *:mysql                 *:*                     LISTEN
tcp        0      0 *:sunrpc                *:*                     LISTEN
tcp        0      0 *:hosts2-ns             *:*                     LISTEN
tcp        0      0 WEBPRO.MyServer:domain *:*                     LISTEN
tcp        0      0 localhost:domain        *:*                     LISTEN
tcp        0      0 *:ftp                   *:*                     LISTEN
tcp        0      0 localhost:953           *:*                     LISTEN
tcp        0      0 *:smtp                  *:*                     LISTEN
tcp        0      0 *:pop3                  *:*                     LISTEN
tcp        0      0 *:imap                  *:*                     LISTEN
tcp        0      0 *:www-http              *:*                     LISTEN
tcp        0      0 *:ssh                   *:*                     LISTEN
tcp        0      0 localhost:953           *:*                     LISTEN
tcp        0      0 *:smtp                  *:*                     LISTEN
tcp        0      0 *:https                 *:*                     LISTEN
tcp        0   2000 WEBPRO.smarttechnol:ssh 33-pool1.ras06.or:62176 ESTABLISHED
tcp        0      0 WEBPRO.smarttechnol:ssh 2-pool2.ras06.ord:62465 ESTABLISHED
IPv6/IPv4 Group Memberships
Interface       RefCnt Group
--------------- ------ ---------------------
lo              1      ALL-SYSTEMS.MCAST.NET
eth0            1      ALL-SYSTEMS.MCAST.NET
lo              1      ipv6-allnodes
eth0            1      ff02::1:ffa8:53a6%1074217068
eth0            1      ipv6-allnodes
I don't know what else to do. Thanks for your help in advance.
Reply With Quote
  #3  
Old 2nd November 2005, 09:06
dahljh dahljh is offline
Junior Member
 
Join Date: Oct 2005
Posts: 24
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Here is my echo localhost:

Code:
Connected to localhost.
Escape character is '^]'.
220 webpro.MyNewServer ESMTP Postfix
ehlo localhost
250-webpro.MyNewServer.com
250-PIPELINING
250-SIZE 10240000
250-VRFY
250-ETRN
250-STARTTLS
250-AUTH PLAIN LOGIN
250-AUTH=PLAIN LOGIN
250 8BITMIME
My ISP does not block port 25

My ISPConfig Server is set in a DMZ at the moment so I don't have any firewall issues.

My ISPConfig server has one IP address and it is static (outside) address.

(I have been reading through the forums and am trying to give the info I see asked alot)

I am using the SUSE 10 Perfect install to the letter.
Reply With Quote
  #4  
Old 2nd November 2005, 09:12
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,740 Times in 2,575 Posts
Default

Quote:
Originally Posted by dahljh
Under Management > Server > Settings
The domain name can or can not be the same as a site I am planning to host?
It can be the same, but the servername should be different from the web site's full address. So the servername can be server1.domain.com, whereas the web site's full address is www.domain.com.

Quote:
Originally Posted by dahljh
Under Management > Server > DNS
All of the sites we are hosting are using multiple outside DNS servers. So what should we put here?
If you don't use the DNS-Manager in ISPConfig you can leave these settings untouched.

Quote:
I have no idea where the email went, but it's not in the users mailbox.
First edit /etc/postfix/main.cf and replace check_relay_domains with reject_unauth_destination in smtpd_recipient_restrictions. Restart Postfix afterwards.
Did you enable/disable Maildir under Management -> Server -> Settings -> Email? If your POP3 daemon is Courier, then you have to activate Maildir, if it's not, then you probably have to disable it.

Quote:
I also don't know who "admispconfig@" is.
The emails to admispconfig are used to create the email traffic statistics in ISPConfig. Nothing to worry about.
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #5  
Old 2nd November 2005, 09:12
dahljh dahljh is offline
Junior Member
 
Join Date: Oct 2005
Posts: 24
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Here is my main.cf

Code:
disable_dns_lookups = no
relayhost =
mailbox_command =
mailbox_transport =
strict_8bitmime = no
disable_mime_output_conversion = no
smtpd_sender_restrictions = hash:/etc/postfix/access
smtpd_client_restrictions =
smtpd_helo_required = no
smtpd_helo_restrictions =
strict_rfc821_envelopes = no
smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,check_relay_domains
smtp_sasl_auth_enable = no
smtpd_sasl_auth_enable = yes
smtpd_use_tls = yes
smtp_use_tls = yes
alias_maps = hash:/etc/aliases
mailbox_size_limit = 0
message_size_limit = 10240000
mydomain = smarttechnologyservices.com
smtpd_sasl_local_domain =
smtpd_sasl_security_options = noanonymous
broken_sasl_auth_clients = yes
smtpd_tls_auth_only = no
smtp_tls_note_starttls_offer = yes
smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key
smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt
smtpd_tls_CAfile = /etc/postfix/ssl/cacert.pem
smtpd_tls_loglevel = 1
smtpd_tls_received_header = yes
smtpd_tls_session_cache_timeout = 3600s
tls_random_source = dev:/dev/urandom

virtual_maps = hash:/etc/postfix/virtusertable

mydestination = /etc/postfix/local-host-names
Reply With Quote
  #6  
Old 2nd November 2005, 09:35
dahljh dahljh is offline
Junior Member
 
Join Date: Oct 2005
Posts: 24
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Changed what you suggested and rebooted the server.

I am using courier and I do have the MailDir enabled.

Here is the current mail log after the reboot.

Code:
Nov  2 03:24:41 WEBPRO pop3d: bind: Address already in use
Nov  2 03:24:53 WEBPRO postfix/postfix-script: starting the Postfix mail system
Nov  2 03:24:53 WEBPRO postfix/master[5644]: daemon started -- version 2.2.5, configuration /etc/postfix
Nov  2 03:26:01 WEBPRO postfix/smtpd[6012]: warning: connect to private/tlsmgr: No such file or directory
Nov  2 03:26:02 WEBPRO postfix/smtpd[6012]: warning: connect to private/tlsmgr: No such file or directory
Nov  2 03:26:02 WEBPRO postfix/smtpd[6012]: warning: problem talking to server private/tlsmgr: No such file or directory
Nov  2 03:26:02 WEBPRO postfix/smtpd[6012]: warning: no entropy for TLS key generation: disabling TLS support
Nov  2 03:26:07 WEBPRO postfix/smtpd[6012]: connect from web30502.mail.mud.yahoo.com[68.142.200.115]
Nov  2 03:26:07 WEBPRO postfix/smtpd[6012]: B7C122FEBE: client=web30502.mail.mud.yahoo.com[68.142.200.115]
Nov  2 03:26:07 WEBPRO postfix/cleanup[6016]: B7C122FEBE: message-id=<20051102082600.13746.qmail@web30502.mail.mud.yahoo.com>
Nov  2 03:26:07 WEBPRO postfix/qmgr[5666]: B7C122FEBE: from=<FredFlintstone@yahoo.com>, size=1209, nrcpt=1 (queue active)
Nov  2 03:26:07 WEBPRO postfix/smtpd[6012]: disconnect from web30502.mail.mud.yahoo.com[68.142.200.115]
Nov  2 03:26:08 WEBPRO postfix/pickup[5665]: 474D32FEC6: uid=10035 from=<smt13_FredFlintstone>
Nov  2 03:26:08 WEBPRO postfix/cleanup[6016]: 474D32FEC6: message-id=<20051102082608.474D32FEC6@webpro.MyNewServer.com>
Nov  2 03:26:08 WEBPRO postfix/qmgr[5666]: 474D32FEC6: from=<smt13_FredFlintstone@webpro.MyNewServer.com>, size=427, nrcpt=1 (queue active)
Nov  2 03:26:08 WEBPRO postfix/local[6040]: 474D32FEC6: to=<admispconfig@localhost.MyNewServer.com>, orig_to=<admispconfig@localhost>, relay=local, delay=0, status=sent (delivered to command: /usr/bin/procmail -f-)
Nov  2 03:26:08 WEBPRO postfix/qmgr[5666]: 474D32FEC6: removed
Nov  2 03:26:15 WEBPRO postfix/local[6017]: B7C122FEBE: to=<smt13_FredFlintstone@webpro.MyNewServer.com>, orig_to=<FredFlintstone@Bedrock.com>, relay=local, delay=8, status=sent (delivered to command: /usr/bin/procmail -f-)
Still no email in the users inbox.
Reply With Quote
  #7  
Old 2nd November 2005, 09:39
till till is online now
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 35,754
Thanks: 821
Thanked 5,331 Times in 4,183 Posts
Default

1) Have a look at the directory /var/spool/mail. Dos the emails arrive there in mbox files?

2) Did you get sort of mbox files in the /tmp/ directory when you send an email and these files stayed in /temp after maildelivery is finished?
Reply With Quote
  #8  
Old 2nd November 2005, 09:45
dahljh dahljh is offline
Junior Member
 
Join Date: Oct 2005
Posts: 24
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
1) Have a look at the directory /var/spool/mail. Dos the emails arrive there in mbox files?
in the /var/spool/mail directory there is something named SMT13_FredFlintstone

Quote:
2) Did you get sort of mbox files in the /tmp/ directory when you send an email and these files stayed in /temp after maildelivery is finished?
I don't know where to check this. I can not find a /temp directory. There is nothing in the /tmp though.

I don;t think I understand what you mean by mbox?
Reply With Quote
  #9  
Old 2nd November 2005, 09:58
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,740 Times in 2,575 Posts
Default

According to the last line of your log the mail has been sent. Can you check the file /var/spool/mail/SMT13_FredFlintstone if the email is in there?

Regarding the tls problems in the log: maybe this helps you: http://www.howtoforge.com/forums/showthread.php?t=781
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #10  
Old 2nd November 2005, 10:03
dahljh dahljh is offline
Junior Member
 
Join Date: Oct 2005
Posts: 24
Thanks: 0
Thanked 0 Times in 0 Posts
 
Default

Quote:
According to the last line of your log the mail has been sent. Can you check the file /var/spool/mail/SMT13_FredFlintstone if the email is in there?
I have 2 files in the var/spool/mail/: SMT13_FredFlintstone and admispconfig.

I dont know what they are, they are not directories.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 17:10.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.