Go Back   HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials > ISPConfig 2 > Installation/Configuration

Do you like HowtoForge? Please consider supporting us by becoming a subscriber.
Reply
 
Thread Tools Display Modes
  #1  
Old 1st February 2007, 16:05
W1SKCC W1SKCC is offline
Junior Member
 
Join Date: Feb 2007
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Default ERROR: The PHP binary coming with ISPConfig does not work properly on your system

Hello,

i got this message during installation of ISPConfig...

Code:
ERROR: The PHP binary coming with ISPConfig does not work properly on your system
Here comes the last messages:

Code:
checking module dependencies and their versions...

***************************************************************************
ERROR: the required Digest::SHA1 module is not installed.

  The Digest::SHA1 module is used as a cryptographic hash for some
  tests and the Bayes subsystem.  It is also used by Razor2.


***************************************************************************
ERROR: the required HTML::Parser (version 3.24) module is not installed.

  Version 3.31 or later is recommended.

  HTML is used for an ever-increasing amount of email so this dependency
  is unavoidable.  Run "perldoc -q html" for additional information.


***************************************************************************
NOTE: the optional Net::DNS (version 0.34) module is not installed.

  Used for all DNS-based tests (SBL, XBL, SpamCop, DSBL, etc.),
  perform MX checks, and is also used when manually reporting spam to
  SpamCop.  Recommended.

  If this is installed and you are using network tests of any variety
  (which is the default), then you need to make sure the Net::DNS
  version is sufficiently up-to-date:

  - version 0.34 or higher on Unix systems
  - version 0.46 or higher on Windows systems


***************************************************************************
NOTE: the optional Mail::SPF::Query module is not installed.

  Used to check DNS Sender Policy Framework (SPF) records to fight email
  address forgery and make it easier to identify spams.


***************************************************************************
NOTE: the optional IP::Country module is not installed.

  Used by the RelayCountry plugin (not enabled by default) to determine
  the domain country codes of each relay in the path of an email.


***************************************************************************
NOTE: the optional Razor2 (version 2.61) module is not installed.

  Used to check message signatures against Vipul's Razor collaborative
  filtering network. Razor has a large number of dependencies on CPAN
  modules. Feel free to skip installing it, if this makes you nervous;
  SpamAssassin will still work well without it.

  More info on installing and using Razor can be found
  at http://wiki.apache.org/spamassassin/InstallingRazor .


***************************************************************************
NOTE: the optional Net::Ident module is not installed.

  If you plan to use the --auth-ident option to spamd, you will need
  to install this module.


***************************************************************************
NOTE: the optional IO::Socket::INET6 module is not installed.

  This is required if the first nameserver listed in your IP
  configuration or /etc/resolv.conf file is available only via
  an IPv6 address.


***************************************************************************
NOTE: the optional IO::Socket::SSL module is not installed.

  If you wish to use SSL encryption to communicate between spamc and
  spamd (the --ssl option to spamd), you need to install this
  module. (You will need the OpenSSL libraries and use the
  ENABLE_SSL="yes" argument to Makefile.PL to build and run an SSL
  compatibile spamc.)


***************************************************************************
NOTE: the optional LWP::UserAgent module is not installed.

  The "sa-update" script requires this module to make HTTP requests.


***************************************************************************
NOTE: the optional HTTP::Date module is not installed.

  The "sa-update" script requires this module to make HTTP
  If-Modified-Since GET requests.


***************************************************************************
NOTE: the optional Archive::Tar (version 1.23) module is not installed.

  The "sa-update" script requires this module to access tar update
  archive files.


***************************************************************************
NOTE: the optional IO::Zlib (version 1.04) module is not installed.

  The "sa-update" script requires this module to access compressed
  update archive files.

REQUIRED module missing: Digest::SHA1
REQUIRED module missing: HTML::Parser
optional module missing: Net::DNS
optional module missing: Mail::SPF::Query
optional module missing: IP::Country
optional module missing: Razor2
optional module missing: Net::Ident
optional module missing: IO::Socket::INET6
optional module missing: IO::Socket::SSL
optional module missing: LWP::UserAgent
optional module missing: HTTP::Date
optional module missing: Archive::Tar
optional module missing: IO::Zlib

warning: some functionality may not be available,
please read the above report before continuing!

ERROR: Could not configure SpamAssassin
cd: could not get current directory: getcwd: cannot access parent directories: No such file or directory
cd: could not get current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/aps.tar.gz': No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/cronolog': No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/cronosplit': No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/zip': No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/unzip': No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
tar: spamassassin.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `spamassassin': No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
tar: uudeview.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `uudeview': No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
tar: clamav.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `clamav': No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
tar: aps.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
./setup2: line 860: ispconfig_tmp/php/bin/php: No such file or directory
job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory
ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!
can somebody HELP me?
Reply With Quote
Sponsored Links
  #2  
Old 1st February 2007, 20:36
martinfst martinfst is offline
Senior Member
 
Join Date: Dec 2006
Location: Hilversum, The Netherlands
Posts: 880
Thanks: 1
Thanked 18 Times in 17 Posts
Send a message via MSN to martinfst Send a message via Skype™ to martinfst
Default

You need a couple of other packages as well. The install document is not 100% complete. On my Ubuntu systems I add:
Code:
apt-get install libdigest-sha1-perl libhtml-parser-perl libnet-dns-perl libmail-spf-query-perl razor libnet-ident-perl libio-socket-ssl-perl libwww-perl libdate-manip-perl libtimedate-perl libarchive-tar-perl webalizer
as a bonus. Will make your install a lot happier.
Reply With Quote
  #3  
Old 2nd February 2007, 13:55
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lüneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,740 Times in 2,575 Posts
 
Default

Quote:
Originally Posted by W1SKCC
Hello,

i got this message during installation of ISPConfig...
Which distribution do you use? Did you follow any of the "Perfect Setups" from HowtoForge?
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
ERROR: The PHP binary coming with ISPConfig does not work properly on your system! qvindesland Installation/Configuration 22 21st May 2007 16:05
ERROR: The PHP binary coming with ISPConfig does not work properly on your system! micko_escalade Installation/Configuration 35 30th March 2007 11:31
The PHP binary coming with ISPConfig does not work properly on your system! lykos Installation/Configuration 3 1st April 2006 07:53
ERROR: The PHP binary coming with ISPConfig does not work properly on your system! max Installation/Configuration 6 13th January 2006 22:07
ISPConfig system stoped johnking Installation/Configuration 7 27th October 2005 02:37


All times are GMT +2. The time now is 13:45.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.