Go Back   HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials > Linux Forums > Server Operation

Do you like HowtoForge? Please consider supporting us by becoming a subscriber.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 7th November 2007, 05:37
DrJohn DrJohn is offline
Member
 
Join Date: Aug 2007
Location: Portland, OR, USA
Posts: 66
Thanks: 8
Thanked 2 Times in 2 Posts
Default No DHCP on second LAN interface

This system has two internal (and one external) interfaces. The internals map to eth0 and eth2 on startup, with the external (static IP) on eth1. DHCP3 works flawlessly on eth0 and shows up in the log, but I get no DHCP allocations for the eth2 interface and see no logged DHCP traffic there.

The second LAN interface goes to a wireless AP, but this isn't the source of the problem -- it works fine if I connect it to the first LAN interface or if I use a fixed IP address on either interface.

I'm running Gutsy Gibbon with Shorewall and dhcp3.

Here's some configuration info (the real server name and external IP have been changed):


$ifconfig

eth0 Link encap:Ethernet HWaddr 00:14:6C:74:C9:37
inet addr:192.168.2.254 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::214:6cff:fe74:c937/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:742891 errors:0 dropped:0 overruns:0 frame:0
TX packets:770574 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:148315574 (141.4 MB) TX bytes:289954504 (276.5 MB)
Interrupt:20 Base address:0x6000

eth1 Link encap:Ethernet HWaddr 00:0C:41:1D:6C9
inet addr: 207.46.197.32 Bcast: 207.46.197.0 Mask:255.255.255.0
inet6 addr: fe80::20c:41ff:fe1d:6cd9/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:814007 errors:0 dropped:0 overruns:0 frame:0
TX packets:332819 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:333381278 (317.9 MB) TX bytes:155803258 (148.5 MB)
Interrupt:19 Base address:0xa800

eth2 Link encap:Ethernet HWaddr 00:10:5A:2A:21:44
inet addr:192.168.3.1 Bcast:192.168.3.255 Mask:255.255.255.0
inet6 addr: fe80::210:5aff:fe2a:2144/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:11565 errors:0 dropped:0 overruns:0 frame:0
TX packets:10667 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1844033 (1.7 MB) TX bytes:10371214 (9.8 MB)
Interrupt:22 Base address:0x6000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:703 errors:0 dropped:0 overruns:0 frame:0
TX packets:703 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:64201 (62.6 KB) TX bytes:64201 (62.6 KB)


$ cat /etc/network/interfaces

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eth1
iface eth1 inet static
address 207.46.197.32
netmask 255.255.255.0
network 207.46.197.0
broadcast 207.46.197.255
gateway 207.46.197.1
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 68.238.128.12 68.238.64.12
dns-search ptldor.fios.verizon.net

#The LAN interface
auto eth0
iface eth0 inet static
address 192.168.2.254
netmask 255.255.255.0
network 192.168.2.0
broadcast 192.168.2.255

#The wireless interface
auto eth2
iface eth2 inet static
address 192.168.3.1
netmask 255.255.255.0
network 192.168.3.0
broadcast 192.168.3.255



$cat /etc/dhcp3/dhcpd.conf


ddns-update-style none;
option domain-name "mydomain.net";
option domain-name-servers mysys.mydomain.net;

default-lease-time 600;
max-lease-time 7200;
authoritative;
log-facility local7;

# A slightly different configuration for an internal subnet.
subnet 192.168.2.0 netmask 255.255.255.0 {
range 192.168.2.200 192.168.2.250;
option domain-name-servers mysys.mydomain.net;
option domain-name "mydomain.net";
option routers 192.168.2.254;
option broadcast-address 192.168.2.255;
default-lease-time 600;
max-lease-time 7200;
}
subnet 192.168.3.0 netmask 255.255.255.0 {
range 192.168.3.2 192.168.3.63;
option domain-name-servers mysys.mydomain.net;
option domain-name "mydomain.net";
option routers 192.168.3.1;
option broadcast-address 192.168.3.255;
default-lease-time 600;
max-lease-time 7200;
}

#Print server @ fixed IP addr
host NPI4255B7 {
hardware ethernet 00:0E:7F:42:55:B7;
fixed-address 192.168.2.253;
}

$cat /etc/shorewall/zones


#ZONE TYPE OPTIONS IN OUT
# OPTIONS OPTIONS
fw firewall
net ipv4
loc ipv4

$ cat /etc/shorewall/interfaces

#ZONE INTERFACE BROADCAST OPTIONS
net eth1 detect tcpflags,routefilter,nosmurfs,logmartians
loc eth0 detect dhcp,tcpflags,detectnets,nosmurfs
loc eth2 detect dhcp,tcpflags,detectnets,nosmurfs

$cat /etc/shorewall/masq

#INTERFACE SUBNET ADDRESS PROTO PORT(S) IPSEC
eth1 eth0 detect
eth1 eth2 detect


I'm at a loss on this one.

Thanks,

DrJohn
Reply With Quote
Sponsored Links
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
cannot access ispconfig web interface spekkio Installation/Configuration 8 16th December 2007 01:15
Advice on how to setup Lintrack As A LAN Gateway And An OpenVPN Bridge eddiequek HOWTO-Related Questions 0 12th July 2007 10:38
Restart Network Error dayjahone Installation/Configuration 1 5th June 2007 19:18
DNS Conflicts (LAN vs WAN) Nap Installation/Configuration 9 18th October 2006 16:28
ISP_CONFIG configuration and LAN IP/STATIC IP configuration sasUse Installation/Configuration 3 30th August 2006 15:30


All times are GMT +2. The time now is 03:53.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.