Go Back   HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials > ISPConfig 2 > Tips/Tricks/Mods

Do you like HowtoForge? Please consider supporting us by becoming a subscriber.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 24th April 2007, 19:51
meemu meemu is offline
Member
 
Join Date: Apr 2007
Posts: 39
Thanks: 2
Thanked 8 Times in 5 Posts
Default fastcgi and php on Debian etch walkthrough

Debian 4.0 etch is the new stable distribution. Noteably, Debian has switched to version 2.2 of apache2. The following walkthrough shows how to setup php running inside the fastcgi apache2 module on this new Debian release.

This walkthrough is based on http://www.howtoforge.com/forums/showthread.php?t=4606 with the following exceptions:
  • use Debian PHP5 or PHP4 pre-compiled binary
  • does not require support for the imuteable bit
  • uses apache 2.2
  • and Debian 4.0 etch
Refer to the original instructions where this walkthrough does not make sense.



For simplicity's sake, this is all done as root. Usually, Debian people recommend using a normal unprivileged account for compiling things and getting package sources.
  • Install apache2.2 and download sources
Code:
apt-get install apache2.2-common apache2-threaded-dev apache2-mpm-worker
mkdir /root/install
cd /root/install
apt-get source apache2.2-common
cd apache2-2.2.3/
debian/rules
./configure
The last step will set the configuration options to the Debian defaults.
  • Patch suexec

Code:
cd support
vi suexec.c
Change accordingly, Line 567 (first and last line of this snippet).
Code:
/* no file owner check
    if ((uid != dir_info.st_uid) ||
        (gid != dir_info.st_gid) ||
 
 
        (uid != prg_info.st_uid) ||
        (gid != prg_info.st_gid)) {
        log_err("target uid/gid (%ld/%ld) mismatch "
                "with directory (%ld/%ld) or program (%ld/%ld)\n",
                uid, gid,
                dir_info.st_uid, dir_info.st_gid,
                prg_info.st_uid, prg_info.st_gid);
        exit(120);
    }
  */
  • Compile and "install" suexec
Code:
make suexec
mkdir -p /usr/local/lib/apache2/
cp suexec /usr/local/lib/apache2/suexec-fcgi
chown root.root /usr/local/lib/apache2/suexec-fcgi
chmod 4755 /usr/local/lib/apache2/suexec-fcgi
Checking the permissions on the file should look like this
Code:
stat /usr/local/lib/apache2/suexec-fcgi
  File: `/usr/local/lib/apache2/suexec-fcgi'
  Size: 24675           Blocks: 56         IO Block: 131072 regular file
Device: 803h/2051d      Inode: 73997       Links: 1
Access: (4755/-rwsr-xr-x)  Uid: (    0/    root)   Gid: (    0/    root)
Access: 2007-04-24 07:24:21.000000000 +0100
Modify: 2007-04-20 13:30:09.000000000 +0100
Change: 2007-04-23 14:09:09.000000000 +0100
  • Install libapache2-mod-fastcgi

The libapache2-mod-fastcgi package is in the non-free section of the Debian repositories. If it's not there yet change your entry in /etc/apt/sources.list from

Code:
deb http://ftp.uk.debian.org/debian/ stable main
to

Code:
deb http://ftp.uk.debian.org/debian/ stable main non-free contrib
Contrib can be useful too sometimes.

Then install fastcgi

Code:
apt-get install libapache2-mod-fastcgi
And configure apache to use it

Code:
a2enmod fastcgi

Now to the configuration of mod_fastcgi. The following allows us to keep the php-fastcgi-starter outside of what the user can access or modify.

Code:
# /etc/apache2/mods-enabled/fastcgi.conf
<IfModule mod_fastcgi.c>
         #AddHandler fastcgi-script .fcgi
         #FastCgiWrapper /usr/lib/apache2/suexec2
         #FastCgiIpcDir /var/lib/apache2/fastcgi

        #temporary sockets are stored here, this must be at the top!
        FastCgiIpcDir /var/lib/apache2/fastcgi

        #config
        FastCgiConfig -pass-header Authorization

        FastCgiWrapper /usr/local/lib/apache2/suexec-fcgi

        #php

        AddHandler php-fastcgi .php .php3 .php4 .php5 .phtml .phps
        <Location /php-fastcgi/php-fcgi-starter>
                SetHandler fastcgi-script
                Options +ExecCGI
        </Location>
        Action php-fastcgi /php-fastcgi/php-fcgi-starter

        #perl
        #TODO

        ##ISPConfig add this by the installtion of it

        ##ISPConfig INSTALL## AddType ##ISPConfig INSTALL## application/x-httpd-php .php

        <Directory "/var/www/">
                AllowOverride None
                Options +ExecCGI -MultiViews -Indexes
                Order allow,deny
                Allow from all
        </Directory>
</IfModule>
  • Install PHP4 and PHP5
Using the PHP from Debian packages makes is easier to maintain and upgrade the system. To install use

Code:
apt-get install php4-cgi php5-cgi php4-mysql php5-mysql
Edit the default configuration files and enable safe_mode and set open_basedir to /var/www. More importantly, add this to both files (/etc/php4/cgi/php.ini and /etc/php5/cgi/php.ini)
Code:
cgi.fix_pathinfo=1
(Note: I am not sure this is necessary)

Create the php-fastcgi starter script
(at this point worth mentioning that ISPConfig should already be installed)
Code:
/root/ispconfig/scripts/php-fcgi-starter
#!/bin/sh
PHPRC="/etc/php5/cgi/"
export PHPRC
PHP_FCGI_CHILDREN=3
export PHP_FCGI_CHILDREN
exec /usr/bin/php5-cgi
and
Code:
chown root.root /root/ispconfig/scripts/php-fcgi-starter
chmod 0755 /root/ispconfig/scripts/php-fcgi-starter
Now patch ISPConfig to use php-fastcgi instead of the php module and create the starter in the right place. This patch also changes the default permissions of new web sites to 750 and adds www-data to every group created by ISPConfig.

Apply this patch to
/root/ispconfig/scripts/lib/config.lib.php

Code:
1119c1119
1119c1119
<
---
>
1120a1121,1123
>   //mimo http://www.howtoforge.org/forums/showthread.php?t=4375
>   // add www user to each new group
>   $mod->system->add_user_to_group("web".$doc_id,$apache_user);
1127a1131,1135
>
>     //mimo 2nd part
>     exec("chmod 750 $web_path");
>     exec("chmod 750 $web_path_realname");
>
1385a1394,1405
>         //FASTCGI (here we could add a handler for different versions of php and php.ini files
>       //FASTCGI Modification
>       #$fcgip = $mod->system->server_conf["server_path_httpd_root"]."/"."web".$web["doc_id"];
>       $fcgip = $mod->system->server_conf["server_path_httpd_root"]."/php-fastcgi/"."web".$web["doc_id"];
>       if(!file_exists($fcgip."/php-fcgi-starter")) {
>               $mod->log->msg("creating $fcgip"."/php-fcgi-starter");
>               if(!file_exists($fcgip)) {
>                       exec("mkdir -p $fcgip");
>               }
>               exec("cp -p /root/ispconfig/scripts/php-fcgi-starter ".$fcgip."/ && chown root:root ".$fcgip."/php-fcgi-starter");
>       }
>
1387c1407,1410
<         $php = "AddType application/x-httpd-php .php .php3 .php4 .php5";
---
>       // FASTCGI
>         //$php = "AddType application/x-httpd-php .php .php3 .php4 .php5";
>       #$php = "ScriptAlias /php-fastcgi/ ".$mod->system->server_conf["server_path_httpd_root"]."/"."web".$web["doc_id"]."/\n";
>       $php = "ScriptAlias /php-fastcgi/ $fcgip\n";
1390a1414,1415
>                 #$php = "ScriptAlias /php-fastcgi/ ".$mod->system->server_conf["server_path_httpd_root"]."/"."web".$web["doc_id"]."/\n";
>                 $php = "ScriptAlias /php-fastcgi/ $fcgip/\n";
1423a1449,1450
> //disbaled FASTCGI
> /*
1432a1460
> */
2513c2541
< ?>
\ No newline at end of file
---
> ?>
1119c1119
<
---
>
1120a1121,1123
>   //mimo http://www.howtoforge.org/forums/showthread.php?t=4375
>   // add www user to each new group
>   $mod->system->add_user_to_group("web".$doc_id,$apache_user);
1127a1131,1135
>
>     //mimo 2nd part
>     exec("chmod 750 $web_path");
>     exec("chmod 750 $web_path_realname");
>
1385a1394,1405
>         //FASTCGI (here we could add a handler for different versions of php and php.ini files
>       //FASTCGI Modification
>       #$fcgip = $mod->system->server_conf["server_path_httpd_root"]."/"."web".$web["doc_id"];
>       $fcgip = $mod->system->server_conf["server_path_httpd_root"]."/php-fastcgi/"."web".$web["doc_id"];
>       if(!file_exists($fcgip."/php-fcgi-starter")) {
>               $mod->log->msg("creating $fcgip"."/php-fcgi-starter");
>               if(!file_exists($fcgip)) {
>                       exec("mkdir -p $fcgip");
>               }
>               exec("cp -p /root/ispconfig/scripts/php-fcgi-starter ".$fcgip."/ && chown root:root ".$fcgip."/php-fcgi-starter");
>       }
>
1387c1407,1410
<         $php = "AddType application/x-httpd-php .php .php3 .php4 .php5";
---
>       // FASTCGI
>         //$php = "AddType application/x-httpd-php .php .php3 .php4 .php5";
>       #$php = "ScriptAlias /php-fastcgi/ ".$mod->system->server_conf["server_path_httpd_root"]."/"."web".$web["doc_id"]."/\n";
>       $php = "ScriptAlias /php-fastcgi/ $fcgip\n";
1390a1414,1415
>                 #$php = "ScriptAlias /php-fastcgi/ ".$mod->system->server_conf["server_path_httpd_root"]."/"."web".$web["doc_id"]."/\n";
>                 $php = "ScriptAlias /php-fastcgi/ $fcgip/\n";
1423a1449,1450
> //disbaled FASTCGI
> /*
1432a1460
> */
2513c2541
< ?>
\ No newline at end of file
---
> ?>
Create the base directory for the php-fastcgi starter scripts. The idea is to have a separate one for each web site so that later on it is possible to chose the version and settings of PHP on a per site basis.

Code:
mkdir /var/www/php-fastcgi
chown root.root /var/www/php-fastcgi
  • Finally, start or restart apache2. All done!

For new web sites ISPConfig will create this structure


/var/www/--+/webX/ <- normal content, user has full access
/var/www/--+/php-fastcgi/webX/php-fastcgi-starter

Last edited by meemu; 16th May 2007 at 17:33. Reason: found a couple of mistakes
Reply With Quote
The Following 3 Users Say Thank You to meemu For This Useful Post:
falko (25th April 2007), mtuser (17th May 2007), till (24th April 2007)
Sponsored Links
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
fastcgi and php with ispconfig tosser Installation/Configuration 14 18th January 2009 13:41
Cron - PHP: Call to undefined function: gzinflate() safoo Server Operation 12 26th January 2007 17:49
fastCGI and PHP just wont work! meridianblade Server Operation 13 9th January 2007 18:30
fastcgi and php with ispconfig tosser Tips/Tricks/Mods 3 25th June 2006 21:01


All times are GMT +2. The time now is 06:15.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.