Go Back   HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials > Linux Forums > HOWTO-Related Questions

Do you like HowtoForge? Please consider supporting us by becoming a subscriber.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 12th April 2007, 03:12
PeterBiggerstaff PeterBiggerstaff is offline
Junior Member
 
Join Date: Apr 2007
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Default Howto: Set Up A Loadbalanced High-Availability Apache Cluster

Hi All,

This question is about: http://www.howtoforge.com/high_avail...apache_cluster


First off, I have to say this is a fantastic howto! I realize that "high availability" and clustering is an very complex process, yet this howto has done an excellent job of compressing it down to a "n00bs guide"

Everything went well (I have 2 load balancers, with active fail over, works perfectly, except the last step..

The howto is for Debian, but the project I am working on is Fedora based.

The howto says to do this on the webservers:

Quote:
vi /etc/network/interfaces
auto lo:0
iface lo:0 inet static
address 192.168.0.105
netmask 255.255.255.255
pre-up sysctl -p > /dev/null
But Redhat/Fedora does not use /etc/network/interfaces it uses
/etc/sysconfig/network-scripts/ifcfg-eth*

I have tried putting this in /etc/sysconfig/network-scripts/ifcfg-lo:0
Quote:
DEVICE=eth0 (I've also tried commenting this out, or using lo:0)
BOOTPROTO=static
BROADCAST=192.168.19.255
HWADDR=00:0C:29:58:10:00 (again I've tried commenting this out)
IPADDR=192.168.19.20 (the virtual IP address)
IPV6ADDR=
IPV6PREFIX=
NETMASK=255.255.255.0
NETWORK=192.168.19.0
ONBOOT=yes
but doing that just breaks all network connectivity...

Does anyone have any ideas?
Reply With Quote
Sponsored Links
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
High Availability Samba cluster - DRBD + Heartbeat djalex Server Operation 58 25th May 2007 19:38
Set Up A Loadbalanced High-Availability Apache Cluster gg234 HOWTO-Related Questions 23 9th May 2007 18:45
Loadbalanced High-Availability Apache Cluster manurro HOWTO-Related Questions 4 10th April 2007 15:59
Loadbalanced Apache Cluster Help brianwebb01 Installation/Configuration 2 18th October 2006 17:01
newbie ububtu 6.0.6 error PHP binary line 816 davidsky73 Installation/Configuration 8 17th September 2006 11:51


All times are GMT +2. The time now is 02:17.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.