Go Back   HowtoForge Forums | HowtoForge - Linux Howtos and Tutorials > Linux Forums > HOWTO-Related Questions

Do you like HowtoForge? Please consider supporting us by becoming a subscriber.
Reply
 
Thread Tools Display Modes
  #21  
Old 14th November 2005, 15:44
dstme dstme is offline
Member
 
Join Date: Nov 2005
Posts: 36
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Thanks Till
I finally got it after trying few mirror. uk3 was fast. So no problem until the last page.
I follow the steps:
Quote:
install HTML::Parser
install DB_File
install Net:NS (when prompted to enable tests, choose no)
install Digest::SHA1
q (to leave the Perl shell)
but I got the following:
Quote:
t/09-tkey.t 255 65280 7 13 185.71% 1-7
t/10-recurse.t 2 512 ?? ?? % ??
t/11-escapedchars.t 2 512 ?? ?? % ??
t/11-inet6.t 1 256 6 1 16.67% 1
2 tests and 12 subtests skipped.
Failed 20/23 test scripts, 13.04% okay. 707/768 subtests failed, 7.94% okay.
make: *** [test_dynamic] Error 1
/usr/bin/make test -- NOT OK
Running make install
make test had returned bad status, won't install without force

cpan> install Digest::SHA1
Digest::SHA1 is up to date.

cpan> q
No history written (no histfile specified).
Lockfile removed.
I did not see
Quote:
HTML::Parser is up to date.
Do I have to run the command: /usr/bin/make install ?
This is my last bit before finish...
Reply With Quote
Sponsored Links
  #22  
Old 14th November 2005, 15:51
till till is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lneburg, Germany
Posts: 37,015
Thanks: 840
Thanked 5,652 Times in 4,461 Posts
Default

Please run the steps to install the perl modules again and make shure you chose no when you are prompted if tests for the Net module shall be enabled.
Reply With Quote
  #23  
Old 14th November 2005, 16:00
dstme dstme is offline
Member
 
Join Date: Nov 2005
Posts: 36
Thanks: 0
Thanked 0 Times in 0 Posts
Default

ok Done it 3 times and when prompt, I put "n" and result is:

Quote:
Test returned status 1 (wstat 256, 0x100)
DIED. FAILED test 1
Failed 1/6 tests, 83.33% okay (less 5 skipped tests: 0 okay, 0.00%)
Failed Test Stat Wstat Total Fail Failed List of Failed
-------------------------------------------------------------------------------
t/00-load.t 72 18432 75 143 190.67% 1 5-75
t/01-resolver-env.t 255 65280 13 25 192.31% 1-13
t/01-resolver-file.t 1 256 8 1 12.50% 1
t/01-resolver-opt.t 255 65280 60 119 198.33% 1-60
t/01-resolver.t 255 65280 44 87 197.73% 1-44
t/02-header.t 255 65280 18 35 194.44% 1-18
t/03-question.t 255 65280 11 21 190.91% 1-11
t/04-packet-unique-push.t 255 65280 75 149 198.67% 1-75
t/04-packet.t 255 65280 39 77 197.44% 1-39
t/05-rr-opt.t 255 65280 7 13 185.71% 1-7
t/05-rr-sshfp.t 2 512 ?? ?? % ??
t/05-rr-txt.t 255 65280 28 55 196.43% 1-28
t/05-rr-unknown.t 255 65280 18 35 194.44% 1-18
t/05-rr.t 255 65280 219 437 199.54% 1-219
t/06-update.t 255 65280 72 143 198.61% 1-72
t/07-misc.t 255 65280 22 42 190.91% 1-22
t/09-tkey.t 255 65280 7 13 185.71% 1-7
t/10-recurse.t 2 512 ?? ?? % ??
t/11-escapedchars.t 2 512 ?? ?? % ??
t/11-inet6.t 1 256 6 1 16.67% 1
2 tests and 12 subtests skipped.
Failed 20/23 test scripts, 13.04% okay. 707/768 subtests failed, 7.94% okay.
make: *** [test_dynamic] Error 1
/usr/bin/make test -- NOT OK
Running make install
make test had returned bad status, won't install without force

cpan> install Digest::SHA1
Digest::SHA1 is up to date.

cpan> q
No history written (no histfile specified).
Lockfile removed.
Anywhere that I miss?
Reply With Quote
  #24  
Old 14th November 2005, 16:27
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,751 Times in 2,581 Posts
Default

make test will always be performed. The "enable tests" question refers to something different.
The Net::DNS module is not necessary so if you can't install it it's no problem. You can install ISPConfig nevertheless.:)
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #25  
Old 14th November 2005, 16:34
dstme dstme is offline
Member
 
Join Date: Nov 2005
Posts: 36
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Thanks Falko.
However I did not see the following:
Quote:
Successful installation of a module looks like this:

/usr/bin/make install -- OK
Any problem?
Reply With Quote
  #26  
Old 14th November 2005, 17:11
falko falko is offline
Super Moderator
 
Join Date: Apr 2005
Location: Lneburg, Germany
Posts: 41,701
Thanks: 1,900
Thanked 2,751 Times in 2,581 Posts
Default

Quote:
Originally Posted by dstme
Thanks Falko.
However I did not see the following:


Any problem?
That's because make test failed. As I've said before, you don't need the Net:NS module.
__________________
Falko
--
Download the ISPConfig 3 Manual! | Check out the ISPConfig 3 Billing Module!

FB: http://www.facebook.com/howtoforge

nginx-Webhosting: Timme Hosting | Follow me on:
Reply With Quote
  #27  
Old 14th November 2005, 18:52
dstme dstme is offline
Member
 
Join Date: Nov 2005
Posts: 36
Thanks: 0
Thanked 0 Times in 0 Posts
 
Default

Thanks guys! You are great. Complete installing. Now time for ISPConfig..
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Fedora Core 4 - The Perfect Setup nandhu HOWTO-Related Questions 27 10th January 2006 13:23
The Perfect Setup - Fedora Core 4 amdserver HOWTO-Related Questions 42 9th November 2005 14:48
The Perfect Setup Fedora Core 4 Proftpd error Nu2Linux HOWTO-Related Questions 3 29th October 2005 21:26
Fedora Core 4: charset problem (UTF-8?) Pasco Server Operation 5 26th August 2005 15:14
Quota: Perfect Setup Fedora Core 4 domino Installation/Configuration 7 20th August 2005 18:42


All times are GMT +2. The time now is 15:10.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.